• Korean Journal of Remote Sensing
• /
• v.30 no.4
• /
• pp.455-464
• /
• 2014

After launching the Geostationary Ocean Color Imager (GOCI) on June 2010, field campaigns were performed routinely around Korean peninsula to collect in-situ data for calibration and validation. Key measurements in the campaigns are radiometric ones with field radiometers such as Analytical Spectral Devices FieldSpec3 or TriOS RAMSES. The field radiometers must be regularly calibrated. We, in the paper, introduce the optical laboratory built in KOSC and the relative calibration method for in-situ measurement spectroradiometer. The laboratory is equipped with a 20-inch integrating sphere (USS-2000S, LabSphere) in 98% uniformity, a reference spectrometer (MCPD9800, Photal) covering wavelengths from 360 nm to 1100 nm with 1.6 nm spectral resolution, and an optical table ($3600{\times}1500{\times}800mm^3$) having a flatness of ${\pm}0.1mm$. Under constant temperature and humidity maintainance in the room, the reference spectrometer and the in-situ measurement instrument are checked with the same light source in the same distance. From the test of FieldSpec3, we figured out a slight difference among in-situ instruments in blue band range, and also confirmed the sensor spectral performance was changed about 4.41% during 1 year. These results show that the regular calibrations are needed to maintain the field measurement accuracy and thus GOCI data reliability.

• Microbiology and Biotechnology Letters
• /
• v.33 no.1
• /
• pp.41-50
• /
• 2005

An organic acid tolerance mutant (M-200) was obtained from Leuconostoc mesenteroides KCCM 35471, followed by the screening procedure using a specific organic acid medium (lactic acid: acetic acid, 2:1). The characteristics of the acid tolerance M-200 and the wild type LM-W were examined at various temperature and pH ranges $(l0-30^{\circ}C$ of temp, 3.5-4.5 of pH). The growth of strain M-200 at HCl adjusted medium $(10^{\circ}C\;and\;pH 3.5)$ was observed. In the case of organic acid adjusted medium, the strain showed its growth at the pH range of 3.8. When the strain M-200 was used as a starter for Kimchi fermentation, a constant acid level (0.55) was observed during the whole fermentation period. This result indicates that the strain produces a proper level of acid content for the Kimchi fermentation. This result also indicates that the edible period of Kimchi can be extended to 3.5 fold compare to the result obtained from the LM-W used Kimchi fermentation. However the excess use of the strain M-200 showed the inhibition of growth of Lactobacillus plantarum, low lactic acid level content and low level of organoleptic test. In the case of organic acid content during the Kimchi fermentation, the strain M-200 showed relatively low production rate compare to the wild type (M-200: 3.5 mg/L at 21 days of fermentation, LM-W: 7 mg/L at 21 days of fermentation). Therefore a mixed Kimchi starter containing M-200 and other strains probably maintain a good Kimchi quality during the fermentation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.4
• /
• pp.224-236
• /
• 2002

A long-term growth simulation was performed at 496 land units in the western coastal plains (WCP) of North Korea to test the potential adaptability of each land unit for growing South Korean rice cultivars. The land units for rice cultivation (CZU), each of them represented by a geographically referenced 5 by 5 km grid tell, were identified by analyzing satellite remote sensing data. Surfaces of monthly climatic normals for daily maximum and minimum temperature, precipitation number of rain days and solar radiation were generated at a 1 by 1 km interval by spatial statistical methods using observed data at 51 synoptic weather stations in North and South Korea during 1981-2000. Grid cells felling within a same CZU and, at the same time, corresponding to the satellite data- identified rice growing pixels were extracted and aggregated to make a spatially explicit climatic normals relevant to the rice growing area of the CZU. Daily weather dataset for 30 years was randomly generated from the monthly climatic normals of each CZU. Growth and development parameters of CERES-rice model suitable for 11 major South Korean cultivars were derived from long-term field observations. Eight treatments comprised of 2 transplanting dates $\times$ 2 cropping systems $\times$ 2 irrigation methods were assigned to each cultivar. Each treatment was simulated with the randomly generated 30 years' daily weather data (from planting to physiological maturity) for 496 land units in WCP to simulate the growth and yield responses to the interannual climate variation. The same model was run with the input data from the 3 major crop experiment stations in South Korea to obtain a 30 year normal performance of each cultivar, which was used as a "reference" for comparison. Results were analyzed with respect to spatial and temporal variation in yield and maturity, and used to evaluate the suitability of each land unit for growing a specific South Korean cultivar. The results may be utilized as decision aids for agrotechnology transfer to North Korea, for example, germplasm evaluation, resource allocation and crop calendar preparation.

• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.93-102
• /
• 2015

The characteristics of frozen soils are one of most important factors for foundation design in cold region. The objective of this study is to evaluate the shear strength and stiffness of frozen soils according to the confining conditions during the freezing and shearing phase. A direct shear box is constructed for the frozen specimens and bender elements are mounted on the wall of the shear box to measure shear wave velocities. Specimens are prepared by mixing sand and silt with a silt fraction of 30% in weight and the degree of saturation of 10%, giving a relative density of 60% for all tests. The temperature of the specimens in the freezer is allowed to fall below -5℃, and then direct shear tests are performed. A series of vertical stresses are applied during the freezing and shearing phase. Shear stress, vertical displacement, and shear wave along the horizontal displacement are measured. Experimental results show that in all the tests, shear strength increases with increasing vertical stress applied during the freezing and shearing phases. The magnitude of the increase in shear strength with increasing vertical stress during shearing under fixed vertical stress in the frozen state is smaller than the magnitude of the increase in vertical stress during freezing and shearing. In addition, the change in shear wave velocities varies with the position of the bender elements. In the case of shear waves passing through the shear plane, the shear wave velocities decrease with increasing horizontal displacement. This study provides an evaluation of the properties of shear strength and stiffness of frozen soils under varied confining condition.

• Journal of Yeungnam Medical Science
• /
• v.9 no.2
• /
• pp.396-406
• /
• 1992

Various susceptibility tests have been used to determine minimal inhibition concentration(MIC) of dermatophytes. They have limitations to apply practically because they need long time to determine MIC. Authors examined MIC of T. rubrum to ketoconazole and itraconazole using 96-well microplate and 24-well macroplate by method of Granade and Artis and tried to check the possibility of this method on clinical application. Nine strains of T. rubrum from patients with dermatophytosis were used. Evaluations of the factors affecting MIC were also tried. The results were as follows. 1. Effect of inoculation density on determination time and MIC : Determination of MIC were possible in 4th days after inoculation at higher inoculation density Caborbance 2.0, 1.0) compared to 6th days at lower inoculation density(absorbance 0.5, 0.25). 2. Effect of incubation temperature on MIC : When incubating at $37^{\circ}C$, MIC were below 0.006-$0.04{\mu}g/ml$ to ketokckonazole and below 0.006-$0.04{\mu}g/ml$ to itraconazole while at $25^{\circ}C$ 0.08-$5.68{\mu}g/ml$ to ketoconazole and 0.006-$0.71{\mu}g/ml$ to itraconazole. Significant reduction of MIC was observed at $37^{\circ}C$ compared to $25^{\circ}C$. 3. Effect of container size on determination time and MIC : When incubating in 96-well microplate and 24-well macroplate, determination of MIC was possible in 4th to 6th days after inoculation in broth-containig 96-well microplate compared to 8th to 12th days in broth-containing 24-well macroplate. But no difference in MIC was observed between different container size. 4. Effect of media on MIC : When using broth as media, MIC were below 0.006-$5.68{\mu}g/ml$ to ketoconazole, below 0.006-$0.36{\mu}g/ml$ to itraconazole in broth-containg 24-well macroplate. When using agar as media, MIC were below 0.006-$5.68{\mu}g/ml$ to ketoconzole, below 0.006-$5.68{\mu}g/ml$ to intraconzole in agar-containing 24-well macroplate. There was slight increase of MIC with agar media compared to broth media. 5. These findings confirm that determination of MIC of dermatophtes by method of Granade and Artis is fast and simple technique for antifungal susceptibility test.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.12
• /
• pp.1087-1093
• /
• 2010

Autotrophic denitrification is known as an effective and economical alternative for heterotrophic denitrification using external carbon sources such as methanol. In this study, we evaluated design and operation parameters for a sulfur denitrification reactor (SDR) treating high strength nitrogen wastewater. The SDR was filled with spherical sulfur media in connected to a pilot-scale nutrient removal process (daily flow rate, $Q=18\;m^3/d$) using moving spongy media. Total nitrogen (TN) concentration of the final effluent was below the 7.0 mg TN/L because nitrate was additionally removed through autotrophic denitrificationin without adding alkalinity (initial alkalinity was $169.4{\pm}20.8\;mg$ $CaCO_3$/L). During the test period, 60~80% of nitrogen in the influent was removed even in low temperature (below $15^{\circ}C$). The alkalinity consumption for nitrate removal in SDR was $4.09{\pm}1.29$ g $CaCO_3/g$ ${NO_3}^-$-N, and the residual alkalinity of influent of SDR was higher than that of theoretical requirements for full conversion of nitrate. The consumption of sulfur was 943.8 g S/d and it was 2.4 times higher than theoretical value (400.1 g S/d) due to abrasion and loss of sulfur media in backwash, etc.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.3
• /
• pp.255-263
• /
• 2006

Vol-oxidizer is a device to convert $UO_2$ pellets into $U_3O_8$ powder and to feed a homogeneous powder into a Metal Conversion Reactor in the ACP(Advanced Spent Fuel Conditioning Process). In this paper, we propose a design model of the vol-oxidizer, develop the new vol-oxidizer with a capacity of 20 kg HM/batch in $UO_2$ pellets, and conduct a verification for the device. Design considerations include the internal structure, the capacity, the heating position of the device, and the size. The dimensions of the new vol-oxidizer are decided by the design model. We determine a permeability test of the $U_3O_8$ measuring the temperature distribution, and the volume of $UO_2$ and $U_3O_8$. We manufactured the new vol-oxidizer for a 20 kg HM/batch in $UO_2$ pellets, and then analyzed the characteristics of the $U_3O_8$ powder for the verification. The experimental results show that the permeability of the $U_3O_8$ throughout mesh enhance more than old vol-oxidizer, the oxidation time takes only 8 hours when compared with the 13 hours of the old device, and the average distribution of particle size is $40{\mu}m$. The capacities of new vol-oxidizer for a 20 kg HM/batch in $UO_2$ pellets were agree well with the predictions of design model.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.3
• /
• pp.184-190
• /
• 1984

Sardine, Sardinops melanosticta, has been caught more than fifty thousand metric tons every year in adjacent sea of Korea, but most of them used for uneatable fish meal because of their rapid spoilage. Usually it is known that the main reason of putrefaction of foods is caused by the maicro-organisms included in them. Therefore, this experiment was carried out to identify the micro-organisms isolated from the intestine of fresh sardine and characterize their proteolytic enzymes produced from them. Aerobic cell count ranged from $1.7{\times}10^4\;to\;3.6{\times}10^5/g$, while anaerobic cell count, from $2.9{\times}10^4\;to\;5.5{\times}10^5/g$. Most of the isolated strains were psychrotrophic mesophiles. Among the two hundred and eighty strains isolated from the fresh samples, fifty-six strains ($20.0\%$) were proteolytics, one hundred and seventy-five strains ($62.5\%$) were lipolytics and tenty-nine strains ($10.5\%$) had the ability to produce hydrogn sulfide. The most predominantly isolated microbial groups from the fresh sardine were Moraxella ($31.4\%$) and Pseudomonas sup. ($28.6\%$). Flavobacterium-Cytophaga, Vibrio, Acinetobacter, Micrococcus spp. and Enterobacteriaceae appeared from $7.9\%\;to\;5\%$ out of total tested strains. The average bacterial count in the spoiled samples (stored at about $18^{\circ}C$ for 48 hours) was increased to the level of $2.9{\times}10^8/g$ for aerobes, $1.5{\times}10^8/g$ for anaerobes, then one hundred and ten strains, corresponding to $52\%$, out of two hundred and thirteen strains submitted to the test were proteolytics. The strongest proteolytic bacterium among the two hundred and eighty strains was identified as Pseudomonas 101 which grew best at $25^{\circ}C$. The optimum condition for the activity of the proteolytic enzyme produced by Pseudomonas 101 appeared $35^{\circ}C$ and pH 9.0, but the activity was relatively unchanged between 5.0 and 11.0 of pH and between $30^{\circ}C\;and\;50^{\circ}C$ of temperature.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.17-28
• /
• 2018

In this study, catalytic activation using sulfuric acid lignin (SAL), the condensed solid by-product from saccharification process, with potassium hydroxide at $750^{\circ}C$ for 1 h in order to investigate its potential to nanoporous carbon In this study, catalytic activation using sulfuric acid lignin (SAL), the condensed solid by-product from saccharification process, with potassium hydroxide at $750^{\circ}C$ for 1 h in order to investigate its potential to nanoporous carbon material. Comparison study was also conducted by production of activated carbon from coconut shell (CCNS), Pinus, and Avicel, and each activated carbon was characterized by chemical composition, Raman spectroscopy, SEM analysis, and BET analysis. The amount of solid residue after thermogravimetric analysis of biomass samples at the final temperature of $750^{\circ}C$ was SAL > CCNS > Pinus > Avicel, which was the same as the order of activated carbon yields after catalytic activation. Specifically, SAL-derived activated carbon showed the highest value of carbon content (91.0%) and $I_d/I_g$ peak ratio (4.2), indicating that amorphous large aromatic structure layer was formed with high carbon fixation. In addition, the largest changes was observed in SAL with the maximum BET specific surface area and pore volume of $2341m^2/g$ and $1.270cm^3/g$, respectively. Furthermore, the adsorption test for three kinds of organic pollutants (phenol, 2,4-Dichlorophenoxyacetic acid, and carbofuran) were conducted, and an excellent adsorption capacity more than 90 mg/g for all activated carbon was determined using 100 ppm of the standard solution. Therefore, SAL, a condensed structure, can be used not only as a nanoporous carbon material with high specific surface area but also as a biosorbent applied to a carbon filter for remediation of organic pollutants in future.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.579-589
• /
• 2007

The objective of this study was to compare the shear bond strengths of five adhesive systems to the enamel and dentin of primary and permanent teeth. Fifty noncarious primary and fifty permanent teeth were collected and stored in an 0.1% thymol solution at room temperature after extraction. The tested adhesives were: Adper Scotchbond Multi-purpose Plus Adhesive (SM) Adper Single bond 2 (SB), Clearfil SE Bond (SE), Adper Prompt L-Pop (PL), GBond (GB). For the shear bonding test, the labial and lingual surfaces of primary and permanent teeth were used. To obtain a flat surface, the labial and lingual surfaces of the teeth were sanded on $SiO_2$ with number 600 grit and then divided into 20 groups of 10 surfaces each. All samples were theromocycled in water $5^{\circ}C$ and $55^{\circ}C$ for 1000 cycles. The results were as follows: 1. For primary enamel, shear bond strengths of SM and SB were significantly higher than that of SE and also SM, SB, and PL were higher than GB(p<0.05). 2. For primary dentin, there were no significant differences among the shear bond strengths of any other bonding systems except difference between SE and GB. 3. For permanent enamel, SB showed significantly higher mean shear bond strength than those of any other bonding systems(p<0.05). 4. For permanent dentin, SM showed significantly higher mean shear bond strength than that of PL and GB(p<0.05). 5. Between the primary enamel and dentin, there were significant differences in SM, SB, and GB, whereas there was statistically significant difference in PL between the permanent enamel and dentin(p<0.05). 6. Between the primary and permanent teeth on enamel, there were no significant differences among all bonding systems, whereas there were statistically significant differences in SM and SB between the primary and permanent teeth on dentin(p<0.05).