• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.83-88
• /
• 2001

This paper presents modelling and analyzing method of centrifugal chiller which has a rated capacity of 200 RT(703 kW) through on-site performance test. Field data of chiller installed in the clean-room building of KIST have been collected, Simple models were developed for predicting the heat exchangers and system performances by regression of chiller operation data during 5 days in August. The models proposed here account for the effect of variations of cooling capacity, temperatures and flow rates of secondary fluids. The models are consistent with real performance data from June to September within ${\pm}5%$ error. The COP of centrifugal chiller are estimated under the standard rating conditions and reduced mass flow rate of chilled and cooling water.

• 한국항해학회지
• /
• 제20권3호
• /
• pp.107-115
• /
• 1996

With the rapid advance of electronic equipments and the frequent, use of them, the electromagnetic environments including EMC or EMI problems are very complicated. The radiation of electromagnetic waves from electronic equipments has strictly been controlled by the authorities concerned from many years ago. Though it is the most proper to test EMI or EMC in the open area test site, we have used the anechoic chamber in place of the test site because of its various restrictions. To achieve the purpose, in this paper, the performances of a few anechoic chambers according to absorbing materials are analyzed for horizontal and vertical polarizations respectively. Furthermore, the calculated and the measured site attenuations in semi-anechoic chamber made with ferrite grid are compared. The obtained results are to be valuable for designing an anechoic chamber.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1513-1515
• /
• 2004

This paper describe the power quality monitoring results of the grid-connected wind turbine generator in Daegwallyeong Test Site. The power quality monitoring for grid-connected wind turbine generators are important to verify their performance as the grid-connected generators. In order to measure the impacts on the grid of wind turbine generator and evaluate the performance by analyzing electrical parameters, we equipped the power quality monitoring system in the real field of the Daegwallyeong test site. The developed monitoring system gathers information by remote access through the internet. The monitoring results and the detail explanation for the developed wind turbine monitoring system is presented in the study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.2008-2009
• /
• 2007

The paper considers the relation between on-line monitoring and diagnostics on the one hand and high-voltage (HV) withstand and partial discharge (PD) on-site testing on the other. HV testing supplies the basic data (fingerprints) for diagnostics. In case of warnings by on-line diagnostic systems, off-line withstand and PD testing delivers the best possible information about defects and enables the classification of the risk. Because alternating voltage (AC) is the most important test voltage, the AC generation on site is considered. Frequency tuned resonant (ACRF) test systems are best adapted to on-site conditions. They can be simply combined with PD measuring equipment. The available ACRF test systems and their application to electric power equipment -from cable systems to power transformers - is introduced.

• 한국항행학회논문지
• /
• 제27권6호
• /
• pp.782-787
• /
• 2023

KASS (korea augmentation satellite system) 시스템 통합 및 검증(IVQ; integration, verification, qualification) 활동은 시스템 및 하위시스템 요구사항 검증 활동으로 IART(inspection, analysis, review of design, test) 기반으로 상세설계 (CDR; critical design review) 이후 하위시스템 공장수락시험 (FAT; factory acceptance test)부터 현장수락시험 (SAT; site acceptance test) 그리고 시스템 통합 검증 시험 (TRR; test readiness review) 까지 수행하였다. FAT 단계의 활동은 개발된 장비를 테스트 플랫폼에 설치하고 각 장비별 인터페이스 검증과 통합운영국(KCS; kass control station)과의 연동시험을 통해 성능을 검증하였다. SAT 단계의 활동은 FAT 단계에서 검증된 KRS (kass reference station), KPS (kass processing station), KUS (kass uplink station), KCS를 운영 현장에 설치하고 검증하는 단계이며 개발 일정 및 여건을 고려하여 3단계로 구분하여 수행하였다. TRR 단계의 활동은 항공위성1호기에서 방송되는 SBAS (satellite based augmentation system) 메시지를 이용하여 SAT을 통해 검증된 장비를 FAT 단계에 수행했던 시험 항목과 추가 시험 항목 검증을 통해 전체 시스템에 대한 성능 검증을 완료하였다.

• 농촌지도와개발
• /
• 제22권1호
• /
• pp.93-100
• /
• 2015

This article describes the process involved in usability testing a agricultural information Web site. In addition to determining the goals and requirements for the agricultural information Web site, a user and task analysis was conducted for defining the its user base and the types of tasks which users might be performing at the site. Usability testing methods with close observation and in-depth interviews provided fresh insights about how users are interacting with the agricultural information Web interface as they approach various information seeking tasks. This study uncovered problems related to unclear terminology, improper interface, location for navigational links, need for context sensitive help, built-in redundancy, and clear and consistent navigation.

• 한국건축시공학회지
• /
• 제12권5호
• /
• pp.510-517
• /
• 2012

This study evaluated the recycling potential of in-site waste soil as pile back filling material (PBFM). We performed experiments to check workability, segregation resistance, bond strength, direct shear stress test, and dynamic load test using in-site waste soil in coastal areas. We found that PBFM showed better performance than general cement paste in terms of workability, segregation resistance, and bond strength. On the other hand, the structural performance of PBFM was slightly lower than that of general cement paste due to the skin friction force of pile by Pile Driving Analyzer and direct shear stress. However, because this type of performance degradation in terms of structure can be improved through the use of piles with larger diameter or by changing the type of pile, considering the economics and environment, we considered that recycling of PBFM has sufficient value.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.185-186
• /
• 2015

The Standard penetration test determines the type of soil according to soil bearing capacity, and this classifies the subsoil into many layers. Construction project managers are willing to know the depth of the present types of subsoil on site in order to make plans on earthwork stage during excavation. However the standard penetration test may not provide accurate information on subsoil type due to incorrect spacing. To solve this problem, this study propose a conceptual algorithm for determining the spacing of standard penetration test spots to essentially tests relevant locations on which to be applied the standard penetration test. This provides the acquirement of the accurate layered model volume of earthwork revised into geological columnar section. This algorithm will determine the appropriate standard penetration test spots spacing on a given size of site to optimize the accuracy of the earthwork volume, time and cost.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.222-232
• /
• 2009

In this study, the real site test conditions were considered and applied to suggest the improved test method for geosynthetics chemical resistance. For this, index and performance tests were done to specify and regulate the more approached test method. Accelerated model by Arrhenius equation was applied to interpretate the experimental data. Through analysis and comparison the overall experimental results, we could suggest the possibility and setup the advanced chemical resistance test method for geosynthetics.

• 디지털융복합연구
• /
• 제2권2호
• /
• pp.29-44
• /
• 2004

The main objective of this study is to investigate the determinants of consumer trust in e-business. It examines consumer perceptions trust in a Web site and address following research questions: What factors influence consumer trust in a Web site and what specific Web site cues are associated with trust and satisfaction? We test our hypothesis in a empirical data from 568 consumers across 4 Web sites. By factor analysis, the results show that Web site characteristics are such as product information and purchase process , system stability, navigation, privacy(security), design, information of seller, pay methods, and customer service. We also find that brand and Web site characteristics such as Web site design, navigation, privacy(security), and customer service can explain over 59% of the variance in Web site trust and 60% in satisfaction. The results offer important implication for Web site strategies that include the manipulation of factors influencing Web site trust. And the future directions of the present research are discussed.