• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.4 s.23
• /
• pp.58-67
• /
• 2005

To overcome limitations of test scope, schedule and cost, M&S(Modeling & Simulation) technique has been applied for T&E(Test and Evaluation) of the state-of-art weapon systems. This paper proposes an air defense simulation software framework to reduce both redundancy an[1 programming errors in system simulator. The proposed framework consists of a 'model' and a 'middleware' The 'middleware' is a reliable communication service layer that supports not only HLA(High Level Architecture) which is an international standard in M&S but also TCP/IP, UDP and etc. The main role of 'model' is to schedule and to run the real-time distributed simulation. The proposed framework has been applied to M-SAM(Middle range Surface to Air Missile) system simulator. The proposed framework's scheduling and communication performance results are satisfactory and were measured by hardwired NTP(Network Timer Protocol) time-stamp with GPS(Global Positioning System) timer for better precision.

• Current Photovoltaic Research
• /
• v.5 no.3
• /
• pp.100-104
• /
• 2017

This paper analyzes the correlation between Net Benefit Test (NBT) and System marginal price (SMP), which has a significant impact on the allocation of demand response (DR) resources in resource scheduling and commitment (RSC) process, based on the performance data of the demand resource market which has been established in 2014. Demand resources compete with generation resources in the RSC process, and it is prescribed to use demand resources only when net benefit occurs. Analysis result shows that the larger the SMP than the Net Benefit Threshold Price (NBTP), the more the winning bid of demand response resource was. It is interpreted that the introduction of NBT in DR market is justified. The demand resource market has been steadily growing. It is required to expand the scope of resources up to the small-sized DR, and to expand the functionalities of demand resources not only in the current energy market but also in the reserve market in the future. In order for that, institutional improvements are required.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.1
• /
• pp.63-72
• /
• 1994

The objective of the study is to develop weather generators for daily rainfall and small pan evaporation and to test the applicability with recorded data. Daily rainfall forecasting model(DRFM) was developed that uses a first order Markov chain to describe rainfall seque- nces and applies an incomplete Gamma function to predict the amount of precipitation. Daily evaporation forecasting model(DEFM) that adopts a normal distribution function to generate the evaporation for dry and wet days was also formulated. DRFM and DEFM were tested with twenty year weather data from eleven stations using Chi-square and Kolmogorov and Smirnov goodness of fit tests. The test results showed that the generated sequences of rainfall occurrence, amount of rainfall, and pan evaporation were statistically fit to recorded data from eleven, seven, and seven stations at the 5% level of significance. Generated rainfall data from DRFM were very close in frequency distri- bution patterns to records for stations all over the country. Pan evaporation for rainy days generated were less accurate than that for dry days. And the proposed models may be used as tools to provide many mathematical models with long-term daily rainfall and small pan evaporation data. An example is an irrigation scheduling model, which will be further detailed in the paper.

• Journal of Information Processing Systems
• /
• v.18 no.3
• /
• pp.428-442
• /
• 2022

A reliable automatic passenger counting (APC) system is a key point in transportation related to the efficient scheduling and management of transport routes. In this study, we introduce a lightweight head detection network using deep learning applicable to an embedded system. Currently, object detection algorithms using deep learning have been found to be successful. However, these algorithms essentially need a graphics processing unit (GPU) to make them performable in real-time. So, we modify a Tiny-YOLOv3 network using certain techniques to speed up the proposed network and to make it more accurate in a non-GPU environment. Finally, we introduce an APC system, which is performable in real-time on embedded systems, using the proposed head detection algorithm. We implement and test the proposed APC system on a Samsung ARTIK 710 board. The experimental results on three public head datasets reflect the detection accuracy and efficiency of the proposed head detection network against Tiny-YOLOv3. Moreover, to test the proposed APC system, we measured the accuracy and recognition speed by repeating 50 instances of entering and 50 instances of exiting. These experimental results showed 99% accuracy and a 0.041-second recognition speed despite the fact that only the CPU was used.

• ETRI Journal
• /
• v.35 no.1
• /
• pp.18-26
• /
• 2013

This paper proposes an efficient bandwidth utilization (EBU) algorithm that utilizes the unused bandwidth in dynamic bandwidth allocation (DBA) of a 10-gigabit-capable passive optical network (XGPON). In EBU, an available byte counter of a queue can be negative and the unused remainder of an available byte counter can be utilized by the other queues. In addition, EBU uses a novel polling scheme to collect the requests of queues as soon as possible. We show through analysis and simulations that EBU improves performance compared to that achieved with existing methods. In addition, we describe the hardware implementation of EBU. Finally we show the test results of the hardware implementation of EBU.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.209-215
• /
• 2002

In this paper, we propose a freight and fleet optimization model under CVO environment. The model is a kind of multi commodity network flow model based on Vehicle Routing Problem(VRP) and Vehicle Scheduling Problem(VSP), and considering operations and purposes of CVO. The main purpose of CVO is the freight and fleet management to reduce logistics cost and to Improve in vehicle safety. Thus, the objective of this model is to minimize routing cost of all the vehicle and to find the location of commodities which have origin and destination. We also present some computing test results.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.3
• /
• pp.320-330
• /
• 2008

This paper presents an improved dynamic programming (IDP) approach to solve the economic power dispatch problem including transmission losses in power systems. A detailed mathematical derivation of recursive dynamic programming approach for the economic power dispatch problem with transmission losses is presented. The transmission losses are augmented with the objective function using price factor. The generalized expression for optimal scheduling of thermal generating units derived in this article can be implemented for the solution of the economic power dispatch problem of a large-scale system. Six-unit, fifteen-unit, and forty-unit sample systems with non-linear characteristics of the generator, such as ramp-rate limits and prohibited operating zones are considered to illustrate the effectiveness of the proposed method. The proposed method results have been compared with the results of genetic algorithm and particle swarm optimization methods reported in the literature. Test results show that the proposed IDP approach can obtain a higher quality solution with better performance.

• Korean Management Science Review
• /
• v.12 no.2
• /
• pp.77-87
• /
• 1995

In this paper we develop an efficient heuristic algorithm for the problem of scheduling n sequence-dependent jobs on a basic processor to minimize makespan. Efficient solution methods are already known for the sequence- independent case. But for the sequence-dependent case, this problem belongs to a set of strong NP-complete problems. We present a heuristic which is similar to shortest setup time heuristic but opportunity cost of setup time rather than shortest setup time is used for choosing next job. This heuristic algorithm has same computational complexity and worst case ratio as the shortest setup time heuristic. We used Wilcoxon signed rank test to show that our heuristic is superior to nearest setup time heuristic in term of average behavior.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2077-2078
• /
• 2006

This paper describes the development or a closed-loop Strapdown Attitude Reference System (SARS) algorithm integrated filtering estimator for determining attitude reference for railway and aviation system using fuzzy inference. The SARS consists of 3 single-axis rate gyms in conjunction with 2 single-axis accelerometers. For optimal values of fuzzy systems, we utilize on-line scheduling method for initial values and then use genetic algorithms for fine tuning. Implementation using experimental test data of unmanned aerial vehicle has been performed in order to verify the estimation. The proposed fuzzy inference based SARS demonstrate that more accurate performance can be achieved in comparison with conventional one. The estimation results were compared with the on-board vertical gyro as the reference standard.

• International Journal of Advanced Culture Technology
• /
• v.5 no.2
• /
• pp.98-105
• /
• 2017

Smartphones are fast growing in the IT market and are the most influential devices in our daily life. Smartphones are being studied for their use in body sensor networks with excellent processing power and wireless communication technology. In this paper, we propose a coordinator design that provides data collection, classification, and display using based on Android-smartphone in multiple sensor nodes. The coordinator collects data of sensor nodes that measure biological patterns using wireless communication technologies such as Bluetooth and NFC. The coordinator constructs a network using a multiple-level scheduling algorithm for efficient data collection at multiple sensor nodes. Also, to support different protocols between heterogeneous sensors, a data sheet recording wireless communication protocol information is used. The designed coordinator used Arduino to test the performance of multiple sensor node environments.