• 한국안전학회지
• /
• 제35권5호
• /
• pp.128-136
• /
• 2020

In the present experimental study, the effect of water-based iron(III) oxide nanofluid on the MFB(Minimum Film Boiling) point during quenching was investigated. As the highly heated test specimen, the cylindrical stainless steel rod was used, and as the test fluids, the water-based iron(III) oxide nanofluids of 0.001 and 0.01 vol% concentrations were prepared with the pure water. To examine the effect of location in the test specimen, the thermocouples were installed at the bottom and middle of wall, and center in the test specimen. Through a series of experiments, the experimental data about the influences of nanofluid concentrations, the number of repeated experiments, and locations in the test specimen on the reaching time to MFB point, MFBT(Minimum Film Boiling Temperature), and MHF(Minimum Heat Flux) were obtained. As a result, with increasing the concentration of nanofluid and the number of repeated experiments, the reaching time to MFB point was reduced, but the MFBT and MHF were increased. In addition, it was found that the effect of water-based iron(III) oxide nanofluid on the MFB point at the bottom of wall in the test specimen was observed to be greater than that at the middle of wall and center. In the present experimental ranges, as compared with the pure water, the water-based iron(III) oxide nanofluid showed that the maximum reduction of reaching time to MFB point was about 53.6%, and the maximum enhancements of MFBT and MHF were about 31.1% and 73.4%, respectively.

• Geomechanics and Engineering
• /
• 제13권6호
• /
• pp.1045-1055
• /
• 2017

Tensile strength is considered key properties for characterizing rock material in engineering project. It is determined by direct and indirect methods. Point load test is a useful testing method to estimate the tensile strengths of rocks. In this paper, the effects of rock shape on the point load index of gypsum are investigated by PFC2D simulation. For PFC simulating, initially calibration of PFC was performed with respect to the Brazilian experimental data to ensure the conformity of the simulated numerical models response. In second step, nineteen models with different shape were prepared and tested under point load test. According to the obtained results, as the size of the models increases, the point load strength index increases. It is also found that the shape of particles has no major effect on its tensile strength. Our findings show that the dominant failure pattern for numerical models is breaking the model into two pieces. Also a criterion was rendered numerically for determination of tensile strength of gypsum. The proposed criteria were cross checked with the results of experimental point load test.

• 화약ㆍ발파
• /
• 제22권1호
• /
• pp.81-91
• /
• 2004

본 연구논문에서는 우리나라 주요 석재인 포천석, 문경석. 일동석 원석을 경기도 포천군 창수면과 신북면에 위치한 삼우석재, 신라석재, 가나석재, 청진석재 등을 방문하여 원석과 판석을 색상, 조직, 구성광물, 입도의 차이에 따라 포천석 원석 42개, 일동석 원석 4개의 원석를 채취하였으며, 경북 상주와 문경시에 위치한 화광산업, 고모치 석재, 세진석재를 방문하여 문경석 원석 12개를 채취하였다. 본 현장에서 채취한 시료에 대한 비중, 공극율, 흡수율. Point Load Test, 삼축압축시험, Brazilim Test, 암석학적 시험 및 분석, 화학적 시험 및 분석을 통해 포천석, 문경석, 일동석 원석의 물리적 특성을 규명하여 석재의 용도에 따른 타당성을 파악하는데 목적이 있다.

• 화약ㆍ발파
• /
• 제22권2호
• /
• pp.45-54
• /
• 2004

본 연구논문에서는 우리나라 주요 석재인 마천석 원석을 경남 함양군 마천면 기흥리에 위치한 마천석재, 덕우석재을 방문하여 원석과 판석을 색상, 조직, 구성광물, 입도의 차이에 따라 마천석 원석 17개를 채취하였다. 본 현장에서 채취한 시료에 대한 비중. 공극율. 흡수율. Point Load Test, 삼축압축시험, Brazilian Test, 암석학적 시험 및 분석, 화학적 시험 및 분석을 통해 마천석 원석의 물리적 특성을 규명하여 석재의 용도에 따른 타당성을 파악하는데 목적이 있다.

• Journal of the Korean Statistical Society
• /
• 제26권2호
• /
• pp.211-222
• /
• 1997

We briefly review three Raleigh type location tests based on direction vectors, which have been shown to be efficient when the distribution is unknown, skewed, or heavy-tailed. Then we calculate their test breakdown points and discuss the robustness of Randles multivariate sign test for one-sample.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.203-206
• /
• 2003

The liquid limit(LL) test is universally used as a standard test for determining one of the index properties of a clay. There are two methods of determining the LL, Casagrande method and cone penetration method that is fall cone test. The interpretation of the Casagrande method of obtaining the LL is not obvious, but it has been suggested that the fall cone test is essentially a strength test and that the LL test simply ascertains the moisture content at which a clay has a certain standard undrained shear strength. This paper presents a determination of the LL by a single-point method. Results obtained from fall cone that is general method and a single-point method are analyzed by comparison.

• Journal of the Korean Data and Information Science Society
• /
• 제21권6호
• /
• pp.1305-1310
• /
• 2010

In this paper, we consider a change point test for stochastic volatility models. By considering the relation between moments of the logarithms of squared returns and the parameters, we construct the cusum test to detect changes of the parameters. We also carry out a simulation study and verify that the proposed test is more powerful than the cusum test proposed by Kokoszka and Leipus (2000).

• 한국소음진동공학회논문집
• /
• 제13권5호
• /
• pp.327-333
• /
• 2003

Several tests are performed to evaluate road booming noise. Baseline test delivers the information of road noise characteristics. Coupling effect between structure and acoustics is obtained from the mode shapes and the natural frequencies by the modal test. Equivalent stiffness at joint areas between chassis and car-body system can be determined by the input point inertance test. Noise sensitivity of body mounting point of a chassis part can be obtained from the noise transfer function test with input point inertance test. Operational deflection shape makes us analyze the actual vibration modes of the chassis system under actual leading and find noise sources very easily. Finally, the transfer path analysis is used to Identify noise Paths through the chassis system. The objectives and the procedures of the tests are described in this Paper Also, the guideline for efficient road noise evaluation test can be found.

• 한국보건간호학회지
• /
• 제1권1호
• /
• pp.17-31
• /
• 1987

This study was carried out for the age 60years over who are attending a villa house for the aged during day time. The purpose of this study was to measure occurance rate of Diabetes by self cognitiveness about their disease of Diabetes; by result of urine test tape test and a questionaire study and self-care behavior about Diabetes. The results of the study are summarized as follow: 1. General Characteristics of the suryeyed. The population studied consisted of 143 males and 256 females comprising $73.9\%$ of the total population registered at the elderly villa house at the time of the study. The mean age group of the study was 70-79 years; educational level $77.2\%$ was below than primary education. 2. The results of Diabetes study. The number of cases who were self-recognized about their Diabetes were 19; 8 males and 11 females. The number of urine sugar positive cases was 35; 19 males and 16 females. The consistency rate of positive urine sugar test was $93.5\%$ An average degree of the results of knowledge test about Diabetes was 1. 4 point. When the correct 1 item was given 1 point for the 6 item of questions. Among 19 cases of self-recognized disease group an average degree of the knowledge test results was 2. 3 point and among the 35 cases of the urine test positive group an average degree of the knowledge test results was 1. 7 point. The average degree of self -care behavior about Diabetes was 1. 6 point when measued 3 point scale on the self-care behavior for the 7 item of questions.

• Journal of Acupuncture Research
• /
• 제24권5호
• /
• pp.89-96
• /
• 2007

Objectives : This report is to compare Remote Acupuncture Point Needling group with Trigger Point Needling group about Shoulder pain treatment. Methods : From November 11th 2006 to May 10th 2007, 30 cases of shoulder pain patients were divided into 2 groups ; one group(test I group) took remote acupuncture point needling, and the other group(test II group) took trigger point needling. For evaluating change of pain, Visual Analog Scale(VAS) and clinical evaluation grade and Range of Motion was checked before and after Treatment. Results : Both acupuncture therapy showed good effect on shoulder pain. And test II group showed better effect on decreasing pain than test I group. It was proved by the difference between VAS and ROM checked before treatment and what checked after treatment. But it was only significant statistically for adduction, inversion and eversion of shoulder joint motion. Conclusion : Trigger point needling can be recommended as a useful therapy to treat shoulder pain.