• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.8-8
• /
• 2000

In this paper are presented main power and gasdynamic characteristics of C-l6VK hypersonic test cell of Research Test Center of CIAM. Gasdynamic adjustment of the C-l6VK test cell was carried out with the working section constructed on scheme of Ramjet/scramjet test in free stream. Gasdynamic adjustment was conducted stage by stage in tile following sequence. First, check and preparation of all technical systems and checking measuring system. Than determination of the characteristics of test cell on cold (without the heating of air at entrance) regime and determination of the characteristics of test cell on regimes with the heating of air. Finally determination of tile characteristics of test cell with the loading of the working part by object. On tile final stage of gasdynamic adjustment two experiments with tile axisymmetric Scramjet model loaded into the working part of test cell were conducted. The first experiment was conducted with the purpose of determination of flow parameters with the object leaded into the working part and verification of experiment cyclogram. The second experiment was conducted with injection of hydrogen into the combustion chamber of object, that is tile conditions on test cell simulated Scramjet flight Mach number M = 6. Such methodology of gasdynamic adjustment allows to determine influence of experimental object on flow parameters in the working part at different conditions of experiment (with the burning in combustion chamber of object and without the homing), and also to compare flow characteristics in the object duct.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.109-115
• /
• 2011

The ice tank is important facility to check the performance of the ship and offshore in ice condition before the construction. MOERI(Maritime & Ocean Engineering Research Institute) constructed ice model basin on the end of 2010. The ice technology to know the phenomena of ice near the ship and to estimate power of the ship in model scale is the main characteristic of the ice model basin. To achieve this goal in one ice sheet, making of test plan and feasibility check of test possibility have to review in the beginning stage of the every test. This paper describes the number of maximum resistance and self propulsion test in a sheet of level ice and proposes the methodology to optimize pack ice, rubble ice, brash ice and ice ridge test in MOERI ice tank. The feasibility of free running test to know maneuvering performance in ice field and some specific idea to measuring ice thickness and ice ridge shape was proposed.

• Journal of Applied Reliability
• /
• v.18 no.2
• /
• pp.161-172
• /
• 2018

Purpose: Test & Evaluation items are main contents which verify performance of the development system and they are deduced going through project management system stages. However, there is no systematic or standardized framework for Test & Evaluation items, so a lot of differences occur between projects and people are questioning whether verification items are selected for the optimization of the development system. In this regard, this research proposes the process of deducing Test & Evaluation items in a systematic way during a development stage by applying QFD (Quality Function Deployment) technique which reflects customers' requirements. Methods: Test & Evaluation items are recognized as customers' requirements, and QFD technique which refines and gathers various requirements of customers effectively during general products' development stage is applied to complete HOQ (House of Quality) Conclusion: There is no specific methodology for Test & Evaluation items, so currently, they are selected by including items which are given by similar projects or higher authorities. However, by utilizing QFD technique, selection of evaluation items which goes through more systematic process is expected to be possible.

• Journal of the Korean Statistical Society
• /
• v.20 no.2
• /
• pp.191-201
• /
• 1991

Given a set of data pxN$_{i}$, matrices X$_{i}$ observed from p-variate normal populations $\prod$$_{i}$~N($\mu$$_{I}$, $\Sigma$$_{i}$) for i=1, …, K, the test for equality form of the covariance matrices is to choose a hypothetical model which best explains the homogeneity/heterogeneity structure across the covariance matrices among the hypothesized class of models. This paper describes a test procedure for selecting the best model. The procedure is based on a synthesis of Bayesian and a cross-validation or sample reuse methodology that makes use of a one-at-a-time schema of observational omissions. Advantages of the test are argued on two grounds, and illustrative examples and simulation results are given.are given.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.3
• /
• pp.282-295
• /
• 2012

Fiber reinforced polymer matrix composites are widely used to provide protection against ballistic impact and blast events. There are several factors that govern the structural response and mechanical properties of a textile composite structure, of which the fiber-matrix interfacial behavior is a crucial determinant. This paper reviews the microbond or microdroplet test methodology that is used to characterize the fiber-matrix interfacial behavior, particularly the interface shear strength (IFSS). The various analytical, experimental, and numerical approaches applied to the microbond test are reviewed in detail.

• Language and Information
• /
• v.4 no.2
• /
• pp.1-26
• /
• 2000

The purpose of this paper is to establish the standard method of evaluation English-to-Korean MT systems We focus on test suites, evaluation procedure and evaluation results. Four computer programs on the market are tested on a test suite consisting of 1,501 sentence, The quality of translation and the capacity of MT system are the key points for evaluation . The sentences in the suite are classified according to the grammatical properties they reveal. The classificatory scheme has the structure of a directory: each sentence belongs to a subclass, which belongs to a major class,. We place the sentences in the test suite on a scale of difficulty (hard ordinary easy) and each output sentence is graded on a scale of four accuracy levels. We also test the programs with respect to their speed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.923-928
• /
• 2009

The performance analysis and robust control of the interior permanent magnet synchronous motor(IPMSM) greatly depend on accurate value of its parameters. To achieve the high performance of torque control, it is necessary to consider exact inductance values because the inductances are nonlinear parameters of operating the IPMSM. Therefore many different methods have been performed for analysis of the methodology for the exact measurement of synchronous inductances. None of them is considered standard, and accuracy levels of all these methods are also not consistent. Among these experimental methods, the DC current decay test and the vector current control test are ideal for a laboratory environment. In this paper, these two test methods are compared by applying inductances to the IPMSM. The paper analyzes the measured inductances of the two methods and their differences with inductances obtained from the finite element method(FEM).

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.19 no.2
• /
• pp.117-129
• /
• 2023

Hydrogen embrittlement of a pipe is an important factor in hydrogen transport. To characterize hydrogen embrittlement, tensile and fracture toughness tests should be conducted. However, in the case of hydrogen-embrittled materials, it is difficult to perform tests in hydrogen environment, particularly at low temperatures. It would be useful to develop a methodology to predict the fracture toughness of hydrogen-embrittled materials at low temperatures using more efficient tests. In this study, the fracture toughness of API X52 steels in hydrogen at low temperatures is predicted from numerical simulation using coupled finite element (FE) damage analyses with FE diffusion analysis, calibrated by analyzing small punch test data.

• Publications of The Korean Astronomical Society
• /
• v.35 no.3
• /
• pp.29-41
• /
• 2020

Korea has numerous astronomical resources, such as observational records, star maps, and a wealth of literature, covering the period from the Three Kingdoms (54 BC - 932 AD) to the Joseon Dynasty (1392 - 1910 AD). The research activities related to these resources have been limited to those by individual researchers. It is now necessary to conduct research by efficiently and systematically collecting and managing Korean astronomical records using an accessible Web environment. The purpose of this study is to complete a system that enables researchers systematically to collect and verify a large number of historical records related to astronomical phenomena in a Web environment. In 2017, a preliminary survey was conducted, and the requirements pertaining to an implementation target system were devised. In addition, a joint development plan was carried out by the developer, lasting three months in 2018. Although the system is relatively simple, it is the first system to be attempted in the historical astronomy field. In order to proceed with the systematic development, the software development methodology is applied to the entire process from deriving the requirements of researchers to completing the system. The completed system is verified through integrated function and performance tests. The functional test is repeated while modifying and testing the system based on various test scenarios. The performance test uses a performance measurement test tool that takes measurements by setting up a virtual operation environment. The developed system is now in normal operation after a one-year trial period. Researchers who become authorized to use the system can use it to verify the accuracy of data and to suggest improvements. The collected feedback will be reflected in future systems, and Korean astronomical records will be available for use internationally through a multilingual service.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.04a
• /
• pp.479-486
• /
• 2004

The purpose of this study is to practical use with increase safety, usablility and economical. In this study, the property of fatigue behavior was tested by comparing reinforced concrete and steel fiber reinforced concrete. The basic test, the static test and fatigue test were used as the research methods. Basic on the test, the material compressive strength test and split tensile strength test ware conducted 7 days and 28 days after the concrete was poured. In the static test, there ware four types of experimental variables of the steel fiber mixing ratio : 0.00%, 0.75%, 1.00%, and 1.25%. The ultimate load initial diagonal tension crack, and initial load of flexural cracking were all observed by static test. A methodology for the probabilistic assement of steel fiber reinforced concrete(SFRC) which takes into account material variability, confinement model uncertainty and the uncertainty in local and globa failure criteria is applied for the derivation of vulnerability curves for the serviceability and ultimate limit states, the reliability of SFRC using the proposed practical linear limit state model is evaluated by using the AFOSM(Advanced First Order Second Moment) method and MCS(monte-Calrosimulation) method.