• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.5
• /
• pp.615-622
• /
• 2012

Airborne radio communications, navigation, and identification equipments are the basic equipment of airplane. Airborne radio communications, navigation, and identification equipments are characterized by user's many quantitative and qualitative requirements. These equipment look like simple test and evaluation, but they have many complex factors. This paper describe the test and evaluation of airborne radio communications, navigation, and identification equipments.

• Journal of radiological science and technology
• /
• v.20 no.2
• /
• pp.44-48
• /
• 1997

For the efficient management of the diagnostic x-ray equipment, a nation-wide inspection of hospitals was performed by an inspection institute in Taejon in the first half of 1997. Among those hospitals inspected, 28 equipments(machines) which were over 500 mA were randomly selected according to their characteristics : 7 condenser type x-ray equipments, 7 three control phase of full wave rectification of type remote control x-ray equipments, 7 single phase of full wave rectification type for general radiography equipments, and 7 single phase of full wave rectification type of R/F equipments. We obtained the following results by conducting the experiment based on the efficiency of the equipments mentioned above. 1) When the equipments are analyzed, 2 out of 7 single phase of full wave rectification type of general radiography equipments(28.6%), 3 out of 7 single phase of full wave rectification type of R/F equipments(42.9%), 5 out of 7 three phase of full wave rectification type remote of control x-ray equipments(71.4%), and 4 out of 7 condenser type of x-ray equipments(57.1%) showed suitability. It proves the superiority of the three phase of full wave rectification type of remote control x-ray equipments. 2) From the overall analysis, only about 50% of the equipments(suitability of 14 out of 28) maintain the efficient management. Therefore, maintenance management of equipments is more necessary. If the efficiency of the x-ray equipment is uniformly maintained and managed to prevent the breakdown(trouble) beforehand especially through the continuous inspection of tube voltage, tube current, exposure time, and collimator, the financial loss and exposure dose to the patient, as well as the workers engaged in radiation, can be reduced for better medical service.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1404-1407
• /
• 2004

An electric railway system is composed of high-tech subsystems, among which main electric equipments such as transformers, converter and traction motors are critical components determining the performance of rolling stock. We developed a measurement system for on-line test and evaluation of performances of Korean High Speed Train. The measurement system is composed of software part and hardware part. Perfect interface between multi-users is possible. A new method to measure temperature was applied to the measurement system. By using the system, measurement and evaluation for the performance of electric equipments in Korean High Speed Train was conducted during test running.

• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.153-163
• /
• 2003

Electronic equipments and make other electronic systems to operate abnormally by means of electromagnetic interference, or can operate abnormally themselves by electromagnetic interference of other electronic systems. Therefore, electronic equipments are required to reduce their electromagnetic interference as small as for other systems to operate properly and operate properly within electromagnetic interference from other electronic systems. In order to prove that electronic equipments meet such requirements, they should undergo electromagnetic environmental test. In this study, we introduce electromagnetic environmental requirements, test procedures and test results of gimbal engine actuation system of KSR-III.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.64-67
• /
• 2000

It is usual that the medical examination of human body need special knowledpe and equipments. Thus we have to spend Lime and energy on going to special place such as hospital where doctors and equipments are. Which often cause missing a good chance af medical treatment as well as giving us inconvenience. However many simple and convenient equipments were developed for checking our health conditions recently. O-ring test is accepted a3 one of useful methods to examine our heallb conditions. Also the test is recognized as a uscful means to judge, withoul any special equipment and medical knowledge, if some medical substances or foods are beneficial or harmful to our health. However, the judgement may be mcorrect because it depend on doctor's subjective point of view.In this study, we developed an automatic O-ring t a r mach~ne which enable us to check our health conditions objectively and quantitatively. The validity of the idea to develope the machine was proved by experiments.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.12
• /
• pp.628-632
• /
• 2006

This paper deals with the electric and thermal characteristics of the composite busbar composed of aluminum and copper. When AC current is flowing in Cu busbar used widely in conservative equipments like power cable, transformer, and switchgear & controlgear most current is concentrated on the surface of the busbar by the skin effect. Therefore, if the Cu region in the busbar having low current density is replaced with aluminum, we can largely reduce the product cost and weight of the busbar. To conform the performance of the composite busbar, we designed and fabricated a test Al/Cu composite busbar. Maximun temperature rise of the busbar was $35^{\circ}C$ when 1600 Arms of AC current was applied to the test composite busbar($120mm{\times}10mm$). Based on test results, we can expect to make the low-priced and light power equipments using the Al/Cu composite busbar.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.99-105
• /
• 2011

The Korean Government is promoting Korean Land Spatialization Program(KLSP) to commercialize and practice of the technology from 2006 to 2012. It is preparing for field test to make research achievements verified in Sejong City by selecting a test-bed area. It creates the conditions to be satisfied standards that can be recognized at internal and external. This paper proposes to design a test bed considering site conditions and various requirements for performance verification of Surveying Equipments in KLSP.

• Journal of Applied Reliability
• /
• v.11 no.4
• /
• pp.371-385
• /
• 2011

Because consumer mostly utilizes company test standard, supplier spends burden of expenses on building test equipments and managing expert manpower to fulfill consumer's various tests. Therefore, it is urgent to standardize test assessment which has a bond of sympathy between consumer and supplier and evaluates reliability of their products. This study develops reliability assessment standard which is composed of 12 test items considering international and domestic test standards, company internal test standards of consumer companies and field conditions. Also this study introduces overall technical procedure on accelerated test with no failure which is used for the main technology of reliability assessment. To verify effectiveness of reliability assessment, the test results are herein analyzed through building the test equipments and performing the test items.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.39-48
• /
• 2013

Recently, the using of prefabricated temporary equipments is increasing in the industrial field because it can reduce the installation and dismantling period. The various types of prefabricated temporary equipments are manufacturing with various materials in domestic and overseas countries. However, those equipments should win the safety certificate according to the "Governmental Notification about Safety Certification" which regulate the member-based safety certification. It tends to cause over performance of temporary equipments because it couldn't consider structural benefit of the prefabricated products. As the result of this study, it is concluded that the establishment of new safety certification standard for the prefabricated temporary equipments is resonable and the movable scaffold is appropriate for those prefabricated temporary equipment. The movable scaffolds are using as single structure and cannot be expands horizontally. Other types of temporary equipments are using as complex structure which can freely expand horizontally according to the main structure. From the results of the study, the standard of vertical compression performance of prefabricated movable scaffolds should be more than double the performance of single main frame. Other test items of safety certification standard should be fixed when the Notification is amended. The prefabricated temporary equipments which are adopted for the safety standard on assembled structure should be used, moved and kept in assembled state and not separated discretionally. The establishment of new standard for the assembled structure based on this study leads to the development of various types of temporary equipments using structural efficiency of prefabricated structure.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.3 no.1
• /
• pp.41-47
• /
• 2009

This paper describes requirements and test methods for the safety of electromyographs and evoked response equipments to be used for medical examination of the central nerve system and motor-sensory functions in cortex. We first establish internationally harmonized requirements for the safety, and then propose a test procedure and test methods corresponding to the requirements based on the international standards. However requirements for the performance of each equipments are not specified in order to admit maker's specifications. Using a electromyography equipment we verified validity of the test methods proposed. Results of this study can be used as a standard for approval of Korea Food and Drug Administration (KFDA).