• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
• /
• pp.223-228
• /
• 2000

본 연구에서는 발파 설계를 쉽게 하기 위하여 RBD(Rock Blasting Design)프로그램을 개발하였다 이 프로그램은 시험 발파 설계, 벤치 발파 설계, 그리고 발파 진동 해석의 기능을 가지며, 지질 특성 값과 발파 상수를 데이터베이스로 제공하고, 여러 상수 값을 재 입력함으로써 보다 빠르고 간편하게 설계할 수 있고 한번 입력한 상수 값을 사용자가 재사용 할 수 있도록 하였다.

• 터널과지하공간
• /
• 제10권3호
• /
• pp.469-474
• /
• 2000

본 연구에서는 발파 설계를 쉽게 하기 위하여 RBD(Rock Blasting Design) 프로그램을 개발하였다. 이 프로그램은 시험 발파 설계, 벤치 발파 설계, 그리고 발파 진동 해석의 기능을 가지며, 지질 특성 값과 발파 상수를 데이터베이스로 제공하고, 여러 상수 값을 재 입력함으로써 보다 빠르고 간편하게 설계할 수 있고 한번 입력한 상수 값을 사용자가 재사용 할 수 있도록 하였다.

• 한국가시화정보학회지
• /
• 제10권2호
• /
• pp.25-31
• /
• 2012

High-performance smartphones, equipped with a digital camera and an application software, can render conventional bench-top laboratory instruments mobile at affordable costs. As the smartphone-based devices are portable and wireless, they have wide applications especially in providing point-of-care (POC) tests in resource-constrained areas. We developed a hand-held diagnostic system, Mobile SmartScope, which consists of a small optical unit integrated with a smartphone. The performance of the SmartScope was favorably compared with that of conventional light microscopy in detecting and quantifying red blood cells. We also evaluated the fluorescence detection limit of the SmartScope incorporated with a blue light-emitting diode and appropriate optical filters by using fluorescently labeled microbeads for intensity calibration.

• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1168-1177
• /
• 2000

Hydrocarbon adsorber is considered as a promising technology to reduce cold start HCs in automotive exhaust gas. In this study, three in-line adsorber systems were tried to reduce the cold start emission. To check the basic characteristics of adsorber converters, surface areas, TPD and TP A were examined after a hydrothermal aging. Also idle engine bench was used to find the adsorption and desorption capabilities of the adsorber systems at cold start. Finally a practicability of the adsorber systems for the LEV achievement was checked with FTP test on a 2.0 D MIT vehicle. The results of this study indicate that hydrocarbon adsorber system is one of the promising passive technologies to meet the ULEV regulation.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.170-177
• /
• 2014

This paper presents a new method of classification of the induction machine faults using Time Frequency Representation, Particle Swarm Optimization and artificial neural network. The essence of the feature extraction is to project from faulty machine to a low size signal time-frequency representation (TFR), which is deliberately designed for maximizing the separability between classes, a distinct TFR is designed for each class. The feature vectors size is optimized using Particle Swarm Optimization method (PSO). The classifier is designed using an artificial neural network. This method allows an accurate classification independently of load level. The introduction of the PSO in the classification procedure has given good results using the reduced size of the feature vectors obtained by the optimization process. These results are validated on a 5.5-kW induction motor test bench.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.431-434
• /
• 2002

In this study, the dynamic absorbing system using MR damper for the multiple structure system with high-level-impact force has been investigated. Based on the experiment and analysis of short recoil system, the dynamic absorbing system has been constructed by using MR damper and stroke-dependent variable damper. Through a series of experimental works with the devised test bench, the absorbing system with MR damper using reverse control is effective for reduction of the transmitted force, furthermore, for implementation to the multi-structure impulsive force system.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.86-94
• /
• 1997

Quick aging of catalysts has done with IAE(Institute for advanced engineering) AGING MODE suggested by IAE. To estimate the effects of number of aging cycle, temperature and $H_2O$, characteristics of surfaces, mechanical properties and weibull modulus were estimated. Also, the conversion efficiency of aged catalysts was evaluated with model gas bench test. The area of surface and pore volume were decreased according to the number of aging cycle. The precious metal which is well dispersed in fresh state was sintered and agglomerated with aging. The mechanical of deactivation and sintering of catalysts are discussed on the basis of mechanical tests. The conversion efficiency was decreased with the repeats of aging. Especially, the existence of $H_2O$ in supply gas had a main role in catalyst deactivation withy high temperature.

• 화약ㆍ발파
• /
• 제8권3호
• /
• pp.3-13
• /
• 1990

First ot of all, under given condition such as bit gage of 36mm Drill bit with right class of jack-leg-experimental test carried out from two face of Bench, firing of each hole brought 90 degree Angle face and them measured length of Burden and charged ammount of powder as following. $ca=\frac{A}{SW}$ A=Activated Area A=nd i=m S=Peripheral length of charged, room Ca=Rock Coeffiecency d: di=Hole diameter When constructed subway of Seoul in 1980 the blasting works increased complaint of ground vibration, in order to prevent the damage to structures. Some empirical equations were made as follows on condition with Jackleg Drill (Bit Gage 36mm) and within 30 meter distance between blasting site and structures. $V=K(D/W)^{-n}$ N=1.60 - 1.78 K= 48 - 138 Project is one of contineous works to above a determination of empirical equation on the cautious blasting vibration with Crawler Drill (70-75mm) in long distance. $V=41(D/\sqrt[3]{W})^{-1.41}$ $30m\le{D}\le{100m}$ $V=124(D/\sqrt[3]{W})^{-1.66}$ $100m\le{D}\le{285m}$.

• Journal of Korean Dental Science
• /
• 제3권2호
• /
• pp.34-39
• /
• 2010

In our daily practice, we think about the diagnosis of our patient and get into a situation wherein we have to make a clinical decision. Diagnosis and treatment come from the knowledge and experiences that each dentist should have, but sometimes, we can have doubts on our decisions. "On what evidence did I make such decision? Was that really right?" Drawing our attention these days as a possible answer to this question, evidence-based dentistry seeks to apply the best available evidence gained from the scientific method to medical decision making. To make a good decision, the strength of evidence is assessed. Specifically, randomized controlled trial, systematic review, and meta-analysis are considered the highest level of evidence; cohort study, case control study, case series, animal study, bench test, and biological plausibility follow. With the approach of evidence-based dentistry, we can make objective, scientifically sound clinical decisions. It is also patient-oriented, incorporating clinical experiences and stressing good judgments; thorough and comprehensive, it uses transparent methodology. That is the reason evidence-based dentistry can be better than other assessment methods when we make a clinical decision in modern dentistry.

• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.116-125
• /
• 2010

In this study, a novel hydraulic energy-regenerative system was presented from its proposal through its modeling to its control. The system was based on a closed-loop hydrostatic transmission and used a hydraulic accumulator as the energy storage system in a novel configuration to recover the kinetic energy without any reversion of the fluid flow. The displacement variation in the secondary unit was reduced, which widened the uses of several types of hydraulic pump/motors for the secondary unit. The proposed system was modeled based on its physical attributes. Simulation and experiments were performed to evaluate the validity of the employed mathematical model and the energy recovery potential of the system. The experimental results indicated that the round trip recovery efficiency varied from 22% to 59% for the test bench.