• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.4
• /
• pp.235-242
• /
• 2019

The purpose of this study was to investigate the proper feeding level and duration of fermented barley grain feed before harvesting to improve the availability of barley for feed. Trial 1 was to investigate the proper feeding amount of fermented barley grain fermented feed, and we prepared 32 heads (603.4 ± 42.7kg) of 22-month-old Hanwoo steer (603.4 ± 42.7kg) for 8 heads in 4 treatment groups. 48 heads (625.8 ± 13.1kg) for Trial 2 were used for 12heads per 4 treatments, and were reared for about 9 months until 30 months of age. Trial 1 is treated a Control group that feed 10㎏ of concentrate, replaces 10% fermented barley grain feed(FBGF) of the control by (TRT 1) and 20% (TRT 2) and 30%(TRT 3). Concentrate and FBGF fed 9, 2.1 kg, 8, 4.2 kg, 7 and 7, 6.3 kg on each treatments respectively and 1.5 kg of rice straw for forage. In Trial 2, 10% of alternative diets were judged to be appropriate, and the control of 9kg of diets and barley grain fermented feeds were used to determine the appropriate feeding period. The treatments were 3 months before shipment (TRT 1), 6 months (TRT 2) and 9 months (TRT32). Each treatment group had 8 and 2.1 kg of concentrate and barley grain fermentation, respectively. As a feed, rice straw was fed to 1.5 kg. The daily gains per treatment were higher in TRT 1 and TRT 3 was similar to the Control. Body weight and daily gain during the test period were higher in TRT 1 fed 10% barley grain fermented feed. TRT 2 was the highest at 6.13, and TRT 3 was 6.0, which was higher than 5.63 of TRT 1 and 5.5 of Control.

• Food Science of Animal Resources
• /
• v.32 no.6
• /
• pp.835-841
• /
• 2012

This study was conducted to determine effect of dietary reduced antibiotics supplementation on carcass characteristics and meat quality of finishing pigs fed stevia and charcoal. A total of 180 pigs (LYD) were randomly allocated into 3 treatments with 3 replications. Dietary treatments were 1) T1 (control, basal diet, no stevia and charcoal addition, antibiotics both in early and late fattening periods), 2) T2 (basal diet, 0.3% stevia + 0.3% charcoal, antibiotics both in early and late fattening periods), 3) T3 (basal diet, 0.3% stevia + 0.3% charcoal, antibiotics in early fattening period only). At each marketing day, pigs were conventionally slaughtered, examined the carcass characteristics and loin (Longissimus) muscles were removed for the meat quality traits. In the carcass characteristics, T3 group showed higher incidence of A carcass grade compared to the other treatments. Backfat thickness was higher in T2 group compared to the others (p<0.05). In the meat quality traits, pH was higher in T1 group than T3 group (p<0.05). Cooking loss was higher in T2 group than T1 group (p<0.05). However, WHC (water holding capacity), drip loss and shear force values did not show any significant differences among treatments. In the panel test, there were no significant differences in tenderness, juiciness, flavor, and total acceptability scores among treatments. As a result, dietary supplementation of reduced antibiotics to finishing pigs fed stevia and charcoal showed similar growth performance and meat quality traits compared to conventional method.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.403-410
• /
• 2015

The purpose of this study was to investigate the problems of a signal to noise ratio measurement using a two region measurement method that is conventionally used when using a multi-channel coil and a parallel imaging technique. As a research method, after calculating the standard SNR using a single channel head coil of which coil satisfies three preconditions when using a two region measurement method, we made comparisons and evaluations after calculating an SNR by using a two region measurement method of which method is problematic because it is used without considering the methods recommended by reputable organizations and the preconditions at the time of using a multi-channel coil and a parallel imaging technique. We found that a two region measurement method using a multi-channel coil and a parallel imaging technique shows the highest relative standard deviation, and thus shows a low degree of precision. In addition, we found out that the difference of SNR according to ROI location was very high, and thus a spatial noise distribution was not uniform. Also, 95% confidence interval through Blend-Altman plot is the widest, and thus the conformity degree with a two region measurement method using the standard single channel head coil is low. By directly comparing an AAPM method, which serves as a standard of a performance evaluation test of a magnetic resonance imaging device under the same image acquisition conditions, an NEMA method which can accurately determine the noise level in a signal region and the methods recommended by manufacturers of a magnetic resonance imaging device, there is a significance in that we quantitatively verified the inaccurate problems of a signal to noise ratio using a two region measurement method when using a multi-channel coil and a parallel imaging technique of which method does not satisfy the preconditions that researchers could overlook.

• Korean Journal of Remote Sensing
• /
• v.32 no.5
• /
• pp.453-469
• /
• 2016

Many image fusion quality assessment techniques, which include Wald's, QNR and Khan's protocols, have been proposed. A total procedure for the quality assessment has been defined as the quality assessment protocol. In this paper, we compared the performance of the three protocols using KOMPSAT-2/3/3A satellite images, and tested the applicability to the fusion quality assessment of the KOMPSAT satellite images. In addition, we compared and analyzed the strengths and weaknesses of the three protocols. We carried out the qualitative and quantitative analysis of the protocols by applying five fusion methods to the KOMPSAT test images. Then we compared the quantitative and qualitative results of the protocols from the aspects of the spectral and spatial preservations. In the Wald's protocol, the results from the qualitative and quantitative analysis were almost matched. However, the Wald's protocol had the limitations 1) that it is timeconsuming due to downsampling process and 2) that the fusion quality assessment are performed by using downsampled fusion image. The QNR protocol had an advantage that it utilizes an original image without downsampling. However, it could not find the aliasing effect of the wavelet-fused images in the spectral preservation. It means that the spectral preservation assessment of the QNR protocol might not be perfect. In the Khan's protocol, the qualitative and quantitative analysis of the spectral preservation was not matched in the wavelet fusion. This is because the fusion results were changed in the downsampling process of the fused images. Nevertheless, the Khan's protocol were superior to Wald's and QNR protocols in the spatial preservation.

• Journal of Chest Surgery
• /
• v.36 no.11
• /
• pp.839-845
• /
• 2003

Background: Even today when chemotherapy has been established as a treatment for tuberculosis and the prevalence of tuberculosis is gradually decreasing, multi-drug resistance tuberculosis still results in poor treatment performance and lowered survival periods. This research sought to analyze the surgery of multi-drug resistance tuberculosis, and determine the usefulness and danger of surgery in connection with this disease. Material and Method: Starting from February 1990 to February 2002, retrospective surveys were conducted targeted at 21 cases involving 20 patients who underwent surgery due to multi-drug resistance tuberculosis. The survey included 14 males cases and 6 females cases with the age averaging 42.8$\pm$12.1 years. 10.3$\pm$7.6 years on average passed after patients were initially diagnosed with tuberculosis. 13 patients (65%) tested positive in the pre-operative sputum AFB test, and all showed resistance against an average of 3.5 anti-tuberculosis agents including INH and RFP. Pre-operative radiologic examinations revealed cavitary lesions in 15 patients (75%), and three patients had lesions in the both lung fields, with the major lesions existing in the unilateral area. 13 patients (75%) failed negative conversion with medical treatment, while two patients (10%) with recurrent hemoptysis and five patients (25%) with lesions involving high recurrence-rate received the operation. Operations included nine cases (40%) of pneumonectomy, nine cases (45%) of lobectomy, and three cases of lobectomy with segmentectomy. The average follow-up period of patients stood at 23 months. Result: There was no post-operative death, and found were a total of eleven cases involving complications were found: three cases of long-term air leakage, three cases of bleeding requiring re-operation, two cases of empyemas due to broncho-pleural fistula, and one case of atelectasis, wound infection and chest wall fistula each. Eleven cases (85%) of negative conversion were completed immediately after the operation, and two cases failed negative conversion. Eleven months after the operation, the disease recurred in one case of negative conversion patients, and the patient was cured by completion pneumonectomy. Conclusion: If patients' lung function was sufficient and appropriate resection was possible, multi-drug resistance tuberculosis could achieve high-rate negative conversion and cure using combination of surgical and medical treatment, and also there were not many serious complications.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3293-3301
• /
• 1974

An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.110-120
• /
• 2005

For utilizing vitrification to treat low and intermediate level waste, industrial pilot plant was designed and constructed in October 1999 at Daejon, Korea through the joint research program among NETEC, MOBIS and SGN. More than 70 tests were performed on simulated IER, DAW etc. including key nuclide surrogate(Cs, Co); this plant has been shown to vitrify the target waste effectively and safely, however, some dust are generated from the HTF(High Temperature Filter) as a secondary waste. In case of long term operation, it is also concerned that pipe plugging can be occurred due to deposited dust in cooling pipe namely, connecting pipe between CCM(Cold Crucible Melter) and HTF. In this regard, we have developed the special complementary system of the off-gas treatment system to recycle the dust from HTF to CCM and to remove the interior dust of cooling pipe. Main concept of the dust recycling is to feed the dust to the CCM as a slurry state; this system is regarded as of an important position in the viewpoint of volume reduction, waste disposal cost and glass melt control in CCM. The role of DRS(Dust Recycling System) is to recycle the major glass components and key nuclides; this system is served to lower glass viscosity and increase waste solubility by recycling B, Na, Li components into glass melt and also to re-entrain and incorporate into glass melt like Cs, Co. Therefore dust recycling is helpful to control the molten glass; it is unnecessary to consider a separate dust treatment system like a cementation equipment. The effects of Dust Cleaner are to prevent the pipe plugging due to dust and to treat the deposited dust by raking the dust into CCM. During the pilot vitrification test, overall performance assessment was successfully performed; DRS and Dust Cleaner are found to be useful and effective for recycling the dust from HTF and also removing the dust in cooling pipe. The obtained operational data and operational experiences will be used as a basis of the commercial facility.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.193-199
• /
• 1980

A series of tests were conducted on the reesterification of rice bran oil containing high free fatty acids (acid value=119.7) with theoretical equivalent of glycerol. Test results showed that reaction rate (in terms of decrease in acid value) was increased as the reaction temperature was increased regardless of the presence of the catalyst and reaction time (42.7, 21.5 and 10.0 at $170^{\circ}C,\;210^{\circ}C\;and\;250^{\circ}C$, respectively) and as the reaction time was increased regardless of the temperature and the presence of the catalyst (31.1 vs 18.3 for 3 hrs vs 6 hrs). The presence of the catalyst (0.2% tin chloride) also accelerated the rate regardless of the reaction temperature and time (36.9 vs 12.5). Analysis by column chromatography showed that content of triglyceride in the oil was increased to 72.9% and 61.1% from 10.4% and content of free fatty acids in the oil was decreased to 1.4% and 6.1% from 60.2%, when the degummed oil was esterified at $250^{\circ}C$ for 6 hrs in the presence of and in the absence of the catalyst, respectively. The results estimated from the iodine values indicate that polymer formation was not significant, when the oil was esterified for 6 hrs at temperatures up to $210^{\circ}C$. However, it was somewhat significant for the oil esterified at $250^{\circ}C$ for 6 hrs. The catalyst did not affect the polymer formation. Analysis by high performance liquid chromatography showed that oleic acid (42.5%), linoleic acid (29.0%) and palmitic acid (20.3%) were the major fatty acid components of the rice bran oil.

• Journal of KIISE:Information Networking
• /
• v.32 no.3
• /
• pp.279-290
• /
• 2005

Recently, as the serious damage caused by DDoS attacks increases, the rapid detection and the proper response mechanisms are urgent. However, existing security mechanisms do not effectively defend against these attacks, or the defense capability of some mechanisms is only limited to specific DDoS attacks. In this paper, we propose a detection architecture against DDoS attack using data mining technology that can classify the latest types of DDoS attack, and can detect the modification of existing attacks as well as the novel attacks. This architecture consists of a Misuse Detection Module modeling to classify the existing attacks, and an Anomaly Detection Module modeling to detect the novel attacks. And it utilizes the off-line generated models in order to detect the DDoS attack using the real-time traffic. We gathered the NetFlow data generated at an access router of our network in order to model the real network traffic and test it. The NetFlow provides the useful flow-based statistical information without tremendous preprocessing. Also, we mounted the well-known DDoS attack tools to gather the attack traffic. And then, our experimental results show that our approach can provide the outstanding performance against existing attacks, and provide the possibility of detection against the novel attack.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.2
• /
• pp.217-223
• /
• 2008

Amylose and protein contents are important traits determining the edible quality of rice, especially in East Asian countries. Near-Infrared Reflectance Spectroscopy (NIRS) has become a powerful tool for rapid and nondestructive quantification of natural compounds in agricultural products. To test the practically of using NIRS for estimation of brown rice amylose and protein contents, the spectral reflectances ($400{\sim}2500\;nm$) of total 9,483 accessions of rice germplasm in Rural development Administration (RDA) Genebank ere obtained and compared to chemically determined amylose and protein content. The protein content of tested 119 accessions ranged from 6.5 to 8.0% and 25 accessions exhibited protein contents between 8.5 to 9.5%. In case of amylose content, all tested accessions ranged from 18.1 to 21.7% and the grade from 18.1 to 19.9% includes most number of accessions as 152 and 4 accessions exhibited amylose content between 20.5 to 21.7%. The optimal performance calibration model could be obtained from original spectra of brown rice using MPLS (Modified Partial Least Squares) with the correlation coefficients ($r_2$) for amylose and protein content were 0.865 and 0.786, respectively. The standard errors of calibration (SEC) exhibited good statistic values: 2.078 and 0.442 for amylose and protein contents, respectively. All these results suggest that NIR spectroscopy may serve as reputable and rapid method for quantification of brown rice protein and amylose contents in large numbers of rice germplasm.