• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.1
• /
• pp.10-18
• /
• 2022

Fishery sea anchor is widely used for many fishing vessels. However, standardization of the dimension and terminology of the fishery sea anchor has not been achieved, reducing the reliability of the performance and safety of the fishery sea anchor. Therefore, this study researches the reality of usage of fishery sea anchor and then attempts to suggest the development direction of the standard draft as basic data. As a result of the survey on the reality of usage show that various terms were used for each part of the fishery sea anchor (including the incorrect form of non-standard words derived from Japanese) and that the production of this product in the fishery sea anchor market was concentrated on one specific manufacturer. In addition, the main specifications of the fishery sea anchor are set and manufactured based on conventional experience without standards. In the field, there was no standardized drawing for fishery sea anchor and users had low awareness of the main specifications of fishery sea anchor. Therefore, this study suggested the following regarding the fishery sea anchor: standard terms for each part including Korean and English names and standard drawing of sea anchor. It is hoped that this study will contribute to research for the standardization of fishery sea anchor, which will increase in reliability and lead to increased interest in standardization in the fishery field.

• Journal of Digital Convergence
• /
• v.17 no.3
• /
• pp.47-54
• /
• 2019

The technical standard is an important factor in the national economy, and its importance is gaining more attention due to the emergence of the convergence industry. This is an essential element for implementing fusion technology because it ensures interoperability. Since standardization activities are essential for the growth of domestic SMEs, this study aims to diagnose the status of standardization activities of SMEs and to suggest policy directions accordingly. And we sought to clarify the status of the standardization activities of domestic SMEs and to draw some implications for the domestic promotion plan by examining the major promotion policies for overseas standardization successfully. As a result, it was found that the investment cost for the standard activities is burdensome, the professional manpower is needed, and the participation of SMEs is low due to the complexity of the standard technology. In addition, standardization activities have weaknesses in terms of technology protection, and SMEs tend to avoid technology disclosure. Therefore, in order to solve the difficulties of standardization of companies, it is necessary to establish cooperation system of supporting organizations. In order to promote standardization activities, it is necessary to establish legal basis necessary for technology protection.

• Cartoon and Animation Studies
• /
• s.10
• /
• pp.17-31
• /
• 2006

The purpose of this study is to find out the problems related to the lack of research on rapidly changing digital information media and industry flow and to suggest solutions. In Korea what is needed is basic academic research on cartoon and animation field, and the development and systemization of teaching material. As a first step to achieve this goal, standardization of cartoon and animation related terminology and publication of a dictionary of terminology are underway. To reach agreements on terms, discover new terms, standardize terms and their interpretations, and publish a standardized dictionary, experts in the fields of cartoon and animation education, industry, and academia in North America, Europe, and Japan have been invited to work together. Through these efforts, a dictionary of terminology will be published, which will not only provide useful information but also solve problems related to the use of not standardized terms.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.4
• /
• pp.515-522
• /
• 2015

Through the correspondence works with IEC in the smart grid fields and power IT fields, we set up the interpretation work procedure and defined the work rule for correspondence by analyzing the work results. In addition, we suggest cases for discussion of terms and definitions in the IEC and analyze them and then propose a matrix classification system for standardization to solve the cases for discussion. The matrix classification system with 3-axes of classification has been applied to newly emerging terminologies followed by smart gird. We drew the usefulness in search of terms in application fields and showed the cases of applying the matrix classification. The IEC Electropedia classification standard is unclear and the classification is mixed with principle, application and product areas. We proposed a new working group in IEC TC1 for research on the matrix classification system and then TC 1 decided to organize a new WG titled in the "IEV structure and supporting tools".

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.11-18
• /
• 2016

Today, wearable technology products are used in a wide range of consumer, healthcare, bio-medical, and industrial applications. The market for wearable technology products is expected to increase dramatically over the next several years. In addition, concerns for safety, performance and reliability of wearable products keep increasing and will be essential for widespread acceptance in the marketplace. Wearable smart devices, which are generally in contact with the human body and skin, are exposed to the risk of the electric shock, burn, and explosion. Therefore, the standardization of wearable devices in terms of human safety and reliability should be very important. Furthermore, the development of test method and test certification of the wearable products will be one of the key technology for mass production. Such standardization and certification will help consumers to choose the safest and best quality wearable devices and allow manufacturers to prove the safety and quality of their products, thereby helping them to gain a competitive technology. This paper discusses the current status of the wearable smart devices as well as the standardization and test certification applicable to wearable technology products.

• Korean Journal of Oriental Medicine
• /
• v.1 no.1
• /
• pp.461-470
• /
• 1995

It has been known many pretreatment methods of Pinellia ternata. In this study, we chose one of them, ${\lceil}$Gang-Banha${\rfloor}$ and compared the process step by step in terms of taste an icon of Pinellia ternata. Identification of the major components and understanding the mechanism of pretreatments should be studied near future.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.1
• /
• pp.191-203
• /
• 2016

The 3D virtual fitting system is a new and very efficient system replacing real fitting in apparel industry and on-line shopping. It is a win-win system for both of consumer and manufacturer which not only reduces design and production time but also resolves consumer's complaints by checking the wearing image beforehand. It is a must-have item in the future. The purpose of this study is to analyze sizing menu, terms, and current status and to figure out problems of avatar sizing programs which substitute human bodies in virtual fitting. We chose three existing outstanding programs in domestic and global market, compared and analyzed the program, manual, and terms that are used in avatar sizing, and investigated the strengths, weaknesses, problems of options and terms and finally suggested an alternative terms. The revealed problems are as follows: each program supports various avatars ranging from male to female, from child to adult, and from oriental style to western style. The image of the avatar could be changed through the options for hair style, shoes and accessories. But we found out some problems. The avatar body types are far from actual human body types, avatar sizing menus and item terms are different from program to program, and terms not yet standardized. Cooperative efforts of industry and academy on standardization of sizing menus and terms should be emphasized for the virtual fitting system to be widely used like the other computer graphic programs or word editors.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.58.1-58.1
• /
• 2017

National Youth Space Center has recently founded the Deokheung Optical Astronomy Observatory (DOAO) 1m Telescope, which accepts community observing applications since 2016. Standardization and calibration of the new observing facility are essential for astronomical research. In this poster, we present standardization processes and preliminary results for photometry of the Johnson-Cousins BVRI filter system. We selected sample data from a night in stable weather condition. After bias, dark, and flat corrections and photometry using ccdred and daophot package of IRAF, we derived standardized band pass parameters including color terms. The corrected photometry results of the BVRI filter system show reduced deviations from the standard magnitudes in the literature. In addition, we calculated atmospheric extinction coefficients and limiting magnitudes of the telescope system. We plan to extend these standardizing processes to flux calibration of narrow band filters, e.g. $H{\alpha}$ filter.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.3
• /
• pp.208-216
• /
• 2020

The Integrated Offshore Standard Specification (IOSS) involves Korean shipyards, classification societies, research institutes, the Korean industrial society, engineering companies, and oil companies with the objective of reducing costs and risks without compromising safety in international offshore engineering procurement construction (EPC) projects using new standardized bulk components and qualification procedures. The activities of the IOSS include the analysis of the existing rules and regulations to achieve the best standardization, which is reflected in the best practices, and minimize the variables in regulations and rules. In addition, a standard inventory of shapes and dimensions, referred to as specifications, is proposed in the IOSS. In this paper, the aluminum tertiary standardization part (IOSS S102-1/2 S104: Specification for Structural Tertiary Design) is presented with the details of the procedures, background reviews, and cost-benefit analyses of the design and verification methods for standard designs in the IOSS standardization items. Based on the cost-benefit analysis, the application of standardized aluminum tertiary items to offshore projects has significant advantages in terms of maintenance and repair compared to the carbon steel tertiary items utilized in current industrial practices.

• The Journal of the Korea Contents Association
• /
• v.18 no.1
• /
• pp.143-153
• /
• 2018

In this study, the difference in specific family of six countries for the representation of the elements of the global advertising through investigate the degree of standardization. National and cultural background, social and economic situation compared to the differences that appear here, would you want to see. Thereby global advertising on the message expressed in this and identify the limiting factor family By country looks for any difference illustrates. The analysis shows various contrasts and differences in products group and countries. But there is no need to pursue standardization of advertising in the global market. Why standardization is needed in terms of efficiency of communication in order to achieve cost savings, and the homogenization of preference. To do this, need to find a way to communicate in a global market of consumers can relate to. After all, this is simply not the standardization of advertising is determined that the communication environment and market conditions to build.