• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.3164-3166
• /
• 2011

• 한국항만학회지
• /
• 제14권1호
• /
• pp.13-26
• /
• 2000

In this paper, we compare and analyze the current state of the productivity of the stevedoring work among several container terminals in 1999. Based on these results of analysis, we firstly classify several factors which impede the efficient operations of container terminal as follows ; late arrival of container beyond cargo closing time(CCT), change of port of destination, change of vessel, and return cargo. Such factors are major cause for the cargo rehandling on terminals, thus deteriorate the overall performance of transfer crane during the stevedoring work. In order to improve the productivity of container terminal, we suggest that it is necessary for establishing and operating the efficient logistics management system. Especially, we emphasize the importance of information exchange on the scheduled cargoes among the relevant parties such as shippers, shipping companies, and terminal operators, which is the most effective way to alleviate the cargo rehandling.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.157-158
• /
• 2023

Doors that are opened and closed when entering or exiting a general building are connected to the door frame and open and close. They are equipped with door locking devices of various structures, and are either locked to the door frame for the closing operation or released from the door frame for the opening and closing operation. Here, a single-stage door binding device having a door latch that is independently disposed at the center of one axis of the door is commonly used. On the other hand, if the size of the door is over a certain size or if the door is medium to large, the opening and closing operation may not be performed smoothly with only a single stage binder, or the closing state may not be achieved stably during the closing operation. In particular, in the case of the single-stage binding device provided in medium to large fire doors, the door is fixed to the door frame unstable, causing fatal errors in the fire prevention function of the fire door. Accordingly, in order to fundamentally solve these problems, we researched and developed a three-stage door binding machine that combines a top and bottom fastening structure with a single-stage fastening structure. This 3-stage door binder not only has the fire resistance performance of a fire door, but also has a T-shaped terminal in its fastening method, so if you eliminate the upper and lower fastening, it is a 1-stage binder like a regular product, but if you remove the door latch of the 1st-stage binder, it functions as an upper and lower 2-stage binder and forms a single mold. We researched and developed a three-stage door binder that can manufacture and produce three products at the same time, satisfying both product performance and price.

• Journal of Oral Medicine and Pain
• /
• 제23권1호
• /
• pp.21-36
• /
• 1998

The purpose of this study was analyse the mandibular movements in patients with internal derangement of the temporomandibular joint according to diagnostic subgroups. The author classified patients with internal derangement of the temporomandibular joint into 4 diagnostic subgroups by means of the magnet resonance imagings, and evaluated the clinical signs and the mandibular movements with Mandibular Kinesiograph(MKG) in each subgroups. The mandibular movements, measured in this study, were the types of movement in frontal and sagittal plane, velocities in opening and closing movement, and the opening and closing movement, and the opening and closing velocity pattern. The data were compared between the 5 groups including the normal group. The results were as follows : 1. Pain was more frequently observed in the anterior disc displacement without reduction group than in the anterior disc displacement with reduction group. Sound of joint was more frequently observed in the anterior disc displacement with reduction group, and limitation of mandibular opening movement was more frequently observed in the anterior disc displacement without reduction group. Duration of the anterior disc displacement without reduction group was significantly short compared to that of the anterior disc displacement with reduction group, and duration of the unilateral anterior disc displacement without reduction group was shortest in the experimental group. The frequency of Angle's classifications had not significant correlations between the experimental groups. 2. Active and passive range of the opening movement, maximum protrusive movement, maximum lateral movement toward left side were significantly decreased in the experimental groups compared to the control group, but there was no significant difference in the range of the maximum lateral movement toward right side between the control and experiment groups. In unilateral anterior disc displacement without reduction group, the range of maximum lateral movement toward unaffected side was no significant difference in the range of the maximum lateral movement between toward affected side and toward unaffected side. 3. Maximum opening velocity, maximum closing velocity, average opening velocity, average closing velocity and maximum velocity of terminal tooth contact were significantly decreased in the experimental groups compared to control group. There was no significant difference in maximum opening velocity and maximum velocity of Terminal tooth contact between the subgroups of the experimental group each other, but there was significant difference in maximum closing velocity, average opening velocity and average closing velocity between the subgroups each other. 4. In the frontal plane of the MKG, the frequency of complex deviation type(F-2)pattern was significantly increased in the anterior disc displacement with out reduction group compared to the anterior disc displacement with reduction group and the control group. In the sagittal plane, the frequency of coincident type(S-1)was decreased in the same group. 5. In the maximum opening velocity pattern, the frequency of no-peak type (OV-3)in the unilateral anterior disc displacement with reduction group was significantly increased compared to the control group. The frequency of 1-peak type (OV-1) and 2-peak type (OV-2) was decreased in the anterior disc displacement with out reduction group, but the frequency of no-peak type (OV-3)was increased in the same group. In the maximum closing velocity pattern, the frequency of no-peak type (CV-3) was significantly increased in the anterior disc displacement without reduction group. Compared to the anterior disc displacement with reduction group and the control group. The frequency of 1-peak type (CV-1) and 2-peak type (CV-2) in the anterior disc displacement with reduction group was decreased than that in the control group.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.190-195
• /
• 2013

Vacuum circuit breaker(VCB) has been widely used for interruption of load current and fault current for high voltage motor in the industrial field. Its arc extinguishing capability is excellent compared to other breakers. But it has the potential to cause multi reignition surge by high extinguishing capability. Surge voltage is generated by the opening and closing of VCB. Multi reignition surge of VCB is steep-fronted waveform. It may have a detrimental effect on the motor winding insulation. So, most of users install a protection device to limit steep-front waveform at the motor terminal or breaker side. So, most of users install a protection device at the motor terminal or breaker side. This protective device is surge absorber(SA) such as ZnO and RC type. In this study, we analyzed whether there is any effect when two type SA is applied to the VCB multi reignition surge. We confirmed that ZnO SA is slightly more effective than RC SA for reduction of multi reignition surge.

• 대한치과교정학회지
• /
• 제22권1호
• /
• pp.67-88
• /
• 1992

The purpose of this study was to investigate the changes of mandibular movement and muscle activity following orthognathic surgery in patients with mandibular prognathism. Lateral cephalogram, M.K.G., E.M.G. recordings were obtained immediately before surgery, and 2 months and 8 months after surgery. Among the patients who received orthognathic surgery, 19(13 men, 6 women) were selected for this study. Statistical analysis for each time interval differences were performed with the SPSS package. The results were as follows: 1. Compared with the pre-operative group (opening 349.7mm/sec, closing 313.1mm/sec), the mean values of the maximum opening and closing velocity in the skeletal Class III surgery group were significantly decreased in the 2 months post-operative (opening 232.9mm/sec, closing 206.9mm/sec), but the values tended to increase in the 8 months post-operative group (opening 280.9 mm/sec, closing 319.1mm/sec). 2. Compared with the pre-operative group (61.7 mm/sec), the maximum velocity of the terminal tooth contact increased in the 2 months (72mm/sec) and 8 months (105.7mm/sec) postoperative groups. 3. In the mean value of vertical freeway space, there was significant difference between the normal group and the pre-operative group, but not between the normal group and the 8 months post-operative group. 4. In the mean values of the maximum opening, the maximum anterio-posterior movement from centric-occlusion, and the lateral deviation from centric occlusion, there was no significant difference between the normal group and the surgery group (the pre-operative and the 8 months post-operative groups). 5. The mature swallowing pattern was 58% in the pre-operative group, but 90% in the 2 months post-operative group, and 63% in the 8 months post-operative group. 6. In the comparison of muscle activity, there was no significant difference between the normal group and the surgery group during the rest position. However, during cotton roll clenching, there was significant difference between the normal group and the pre-operative group, but not between the normal group and the 8 months post-operative group.

• Korean Chemical Engineering Research
• /
• 제43권6호
• /
• pp.647-661
• /
• 2005

키랄성 말단기의 에폭사이드는 키랄중간체나 여러 출발물질로서 다양하게 이용되기 때문에 입체선택적인 합성방법은 학술적으로나 산업적인 관점에서 대단히 흥미롭다. 본 총설에서는 키랄성 코발트 살렌을 이용한 비대칭 고리열림 반응에 대한 연구개발동향을 고찰하였다. 여러 가지 가능한 합성방법 중에서 가수분해의 속도차에 의한 분리반응기술은 높은 광학순도의 터미널 에폭사이드를 합성할 수 있는 탁월한 방법이다. 본 저자들은 균일계 및 불균일계의 키랄성이핵성 살렌 착체를 합성하여, 에폭사이드의 고리를 여러 종류의 친핵체로 광학선택적으로 열고 다시 선택적으로 고리화시키는 한 단계의 반응에 대하여 그들의 활성을 조사하였다. 촉매와 염기 존재하에서 고리 열림과 닫음 반응을 조합시킴으로써 고수율로 높은 광학순도의 에폭사이드를 제조할 수 있었다. 이들 촉매는 공업적인 규모로 키랄 중간체를 생산하는데 이용되고 있다. 본 논문에서는 가수분해 속도차이에 따른 분리반응 기술을 적용하여 여러 종류의 키랄성 화합물을 제조한 연구실험 결과를 서술하였다.

• 한국항해항만학회지
• /
• 제30권3호
• /
• pp.227-233
• /
• 2006

상해를 포함한 북중국 항만들이 빠르게 성장하면서 동북아 허브항을 지향하는 항만간의 경쟁이 치열하게 전개되고, 부산항의 위기론까지 대두되고 있다. 그러나 북중국 항만들의 성장에 관한 낙관적인 전망과 함께 기상 악화 및 지리적 원거리로 인한 운영상의 제약 문제가 제기되기도 한다. 기상 악화 문제는 선박 운항 및 터미널 하역 작업에 직접 영향을 미치기 때문에 항만의 경쟁력을 논할 때 우선 고려되어야 하는 요인 중 하나이지만 기존 문헌은 이러한 항만 운영 외적 요인에 대한 검토가 극히 미흡하다. 따라서 본 논문은 국내 소재 국적 선사 및 외국선사 대리점을 대상으로 상해 및 북중국 항만의 제약 요인을 분석하였다. 조사 결과 응답자들은 북중국 항만의 최대 제약 요인으로서 기상 악화를 꼽았으며, 그로 인한 세부적인 문제점으로서 정기선박의 스케줄 운영 불가, 일정을 맞추기 위해 해당 항만을 건너뛸(skip) 경우 발생하는 유지비용 과다, 화물집하의 어려움, 납기 준수 불가, 영업물량 감소 등을 들었다.

• 공업화학
• /
• 제26권2호
• /
• pp.132-137
• /
• 2015

BEA형 제올라이트를 알칼리용액으로 처리하여 결정구조 내에 메조세공이 형성되도록 제조하고, 세공 내에 균일계 키랄 Co(III) 살렌을 고정화시켰다. 메조세공 BEA-제올라이트에 고정화된 이핵형 Co-$GaCl_3$ 살렌 촉매는 말단 에폭사이드의 산소고리를 카르복실산으로 여는 키랄 반응에 대하여 높은 활성을 나타내었다. 이 반응을 통하여 라세믹 에폭사이드로부터 다양한 모노 에스테르 유도체를 중간 정도의 광학선택도(47~69 ee%)로 합성할 수 있었다. 키랄(S)-ECH를 반응물로 사용하면, 이들은 키랄 살렌 촉매 존재하에서 카르복시 산에 의하여 에폭사이드의 링이 광학선택적으로 열리며, 생성된 화합물을 염기용액에서 탈염산 처리하면 다시 에폭사이드 링이 형성되면서 광학순도가 매우 높은 모노에스터 에폭사이드 (R)-GB (98 ee% 이상)가 얻어졌다. 고정화촉매는 매우 용이하게 제조될 수 있었으며, 특별한 재생처리 없이 여러번 재사용하여도 촉매의 활성이 유지되었다.

• 한국콘텐츠학회논문지
• /
• 제6권1호
• /
• pp.8-13
• /
• 2006

본 논문에서는 모바일 단말기의 키 버튼을 누르면 발생되는 DTMF 신호를 이용하여 자동 도어락 시스템을 제안하고 구현한다. 모바일 단말기의 DTMF신호처리를 위하여 이 시스템은 송신기 모듈과 수신기 모듈로 구성된다. 이어폰 잭으로 연결된 모바일 단말기의 DTMF신호들은DTMF수신기의 입력단자로 들어가서 4비트 형식을 갖는 부호변환기에 의해 이진신호로 부호화된다. 부호화된 출력신호들은 ASK 송신기 모듈로 전송되고 RF신호로 변조되어 자유공간으로 전파된다. 자유공간을 통하여 전달된 RF신호들은 수신기모듈인 ASK복조기에 의해 복조되고 MCU로 보내진다. MCU에 의해서 처리된 출력신호들은 이미 프로세서 내에 기록된 비밀번호와 비교되고 파워릴레이로 전달된다. 만약 비교된 결과 값이 일치하면 자동 도어락 시스템은 도어를 열게 되고 그 반대의 경우에는 도어를 닫은 상태를 유지한다. 본 논문에서 구현된 자동 도어락 시스템은 무선 환경에서 잘 동작한다.