• Bulletin of the Korean Chemical Society
• /
• v.32 no.spc8
• /
• pp.3164-3166
• /
• 2011

• Journal of Korean Port Research
• /
• v.14 no.1
• /
• pp.13-26
• /
• 2000

In this paper, we compare and analyze the current state of the productivity of the stevedoring work among several container terminals in 1999. Based on these results of analysis, we firstly classify several factors which impede the efficient operations of container terminal as follows ; late arrival of container beyond cargo closing time(CCT), change of port of destination, change of vessel, and return cargo. Such factors are major cause for the cargo rehandling on terminals, thus deteriorate the overall performance of transfer crane during the stevedoring work. In order to improve the productivity of container terminal, we suggest that it is necessary for establishing and operating the efficient logistics management system. Especially, we emphasize the importance of information exchange on the scheduled cargoes among the relevant parties such as shippers, shipping companies, and terminal operators, which is the most effective way to alleviate the cargo rehandling.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.157-158
• /
• 2023

Doors that are opened and closed when entering or exiting a general building are connected to the door frame and open and close. They are equipped with door locking devices of various structures, and are either locked to the door frame for the closing operation or released from the door frame for the opening and closing operation. Here, a single-stage door binding device having a door latch that is independently disposed at the center of one axis of the door is commonly used. On the other hand, if the size of the door is over a certain size or if the door is medium to large, the opening and closing operation may not be performed smoothly with only a single stage binder, or the closing state may not be achieved stably during the closing operation. In particular, in the case of the single-stage binding device provided in medium to large fire doors, the door is fixed to the door frame unstable, causing fatal errors in the fire prevention function of the fire door. Accordingly, in order to fundamentally solve these problems, we researched and developed a three-stage door binding machine that combines a top and bottom fastening structure with a single-stage fastening structure. This 3-stage door binder not only has the fire resistance performance of a fire door, but also has a T-shaped terminal in its fastening method, so if you eliminate the upper and lower fastening, it is a 1-stage binder like a regular product, but if you remove the door latch of the 1st-stage binder, it functions as an upper and lower 2-stage binder and forms a single mold. We researched and developed a three-stage door binder that can manufacture and produce three products at the same time, satisfying both product performance and price.

• Journal of Oral Medicine and Pain
• /
• v.23 no.1
• /
• pp.21-36
• /
• 1998

The purpose of this study was analyse the mandibular movements in patients with internal derangement of the temporomandibular joint according to diagnostic subgroups. The author classified patients with internal derangement of the temporomandibular joint into 4 diagnostic subgroups by means of the magnet resonance imagings, and evaluated the clinical signs and the mandibular movements with Mandibular Kinesiograph(MKG) in each subgroups. The mandibular movements, measured in this study, were the types of movement in frontal and sagittal plane, velocities in opening and closing movement, and the opening and closing movement, and the opening and closing velocity pattern. The data were compared between the 5 groups including the normal group. The results were as follows : 1. Pain was more frequently observed in the anterior disc displacement without reduction group than in the anterior disc displacement with reduction group. Sound of joint was more frequently observed in the anterior disc displacement with reduction group, and limitation of mandibular opening movement was more frequently observed in the anterior disc displacement without reduction group. Duration of the anterior disc displacement without reduction group was significantly short compared to that of the anterior disc displacement with reduction group, and duration of the unilateral anterior disc displacement without reduction group was shortest in the experimental group. The frequency of Angle's classifications had not significant correlations between the experimental groups. 2. Active and passive range of the opening movement, maximum protrusive movement, maximum lateral movement toward left side were significantly decreased in the experimental groups compared to the control group, but there was no significant difference in the range of the maximum lateral movement toward right side between the control and experiment groups. In unilateral anterior disc displacement without reduction group, the range of maximum lateral movement toward unaffected side was no significant difference in the range of the maximum lateral movement between toward affected side and toward unaffected side. 3. Maximum opening velocity, maximum closing velocity, average opening velocity, average closing velocity and maximum velocity of terminal tooth contact were significantly decreased in the experimental groups compared to control group. There was no significant difference in maximum opening velocity and maximum velocity of Terminal tooth contact between the subgroups of the experimental group each other, but there was significant difference in maximum closing velocity, average opening velocity and average closing velocity between the subgroups each other. 4. In the frontal plane of the MKG, the frequency of complex deviation type(F-2)pattern was significantly increased in the anterior disc displacement with out reduction group compared to the anterior disc displacement with reduction group and the control group. In the sagittal plane, the frequency of coincident type(S-1)was decreased in the same group. 5. In the maximum opening velocity pattern, the frequency of no-peak type (OV-3)in the unilateral anterior disc displacement with reduction group was significantly increased compared to the control group. The frequency of 1-peak type (OV-1) and 2-peak type (OV-2) was decreased in the anterior disc displacement with out reduction group, but the frequency of no-peak type (OV-3)was increased in the same group. In the maximum closing velocity pattern, the frequency of no-peak type (CV-3) was significantly increased in the anterior disc displacement without reduction group. Compared to the anterior disc displacement with reduction group and the control group. The frequency of 1-peak type (CV-1) and 2-peak type (CV-2) in the anterior disc displacement with reduction group was decreased than that in the control group.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.190-195
• /
• 2013

Vacuum circuit breaker(VCB) has been widely used for interruption of load current and fault current for high voltage motor in the industrial field. Its arc extinguishing capability is excellent compared to other breakers. But it has the potential to cause multi reignition surge by high extinguishing capability. Surge voltage is generated by the opening and closing of VCB. Multi reignition surge of VCB is steep-fronted waveform. It may have a detrimental effect on the motor winding insulation. So, most of users install a protection device to limit steep-front waveform at the motor terminal or breaker side. So, most of users install a protection device at the motor terminal or breaker side. This protective device is surge absorber(SA) such as ZnO and RC type. In this study, we analyzed whether there is any effect when two type SA is applied to the VCB multi reignition surge. We confirmed that ZnO SA is slightly more effective than RC SA for reduction of multi reignition surge.

• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.67-88
• /
• 1992

The purpose of this study was to investigate the changes of mandibular movement and muscle activity following orthognathic surgery in patients with mandibular prognathism. Lateral cephalogram, M.K.G., E.M.G. recordings were obtained immediately before surgery, and 2 months and 8 months after surgery. Among the patients who received orthognathic surgery, 19(13 men, 6 women) were selected for this study. Statistical analysis for each time interval differences were performed with the SPSS package. The results were as follows: 1. Compared with the pre-operative group (opening 349.7mm/sec, closing 313.1mm/sec), the mean values of the maximum opening and closing velocity in the skeletal Class III surgery group were significantly decreased in the 2 months post-operative (opening 232.9mm/sec, closing 206.9mm/sec), but the values tended to increase in the 8 months post-operative group (opening 280.9 mm/sec, closing 319.1mm/sec). 2. Compared with the pre-operative group (61.7 mm/sec), the maximum velocity of the terminal tooth contact increased in the 2 months (72mm/sec) and 8 months (105.7mm/sec) postoperative groups. 3. In the mean value of vertical freeway space, there was significant difference between the normal group and the pre-operative group, but not between the normal group and the 8 months post-operative group. 4. In the mean values of the maximum opening, the maximum anterio-posterior movement from centric-occlusion, and the lateral deviation from centric occlusion, there was no significant difference between the normal group and the surgery group (the pre-operative and the 8 months post-operative groups). 5. The mature swallowing pattern was 58% in the pre-operative group, but 90% in the 2 months post-operative group, and 63% in the 8 months post-operative group. 6. In the comparison of muscle activity, there was no significant difference between the normal group and the surgery group during the rest position. However, during cotton roll clenching, there was significant difference between the normal group and the pre-operative group, but not between the normal group and the 8 months post-operative group.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.647-661
• /
• 2005

The stereoselective synthesis of chiral terminal epoxide is of immense academic and industrial interest due to their utility as versatile starting materials as well as chiral intermediates. In this review, we investigate the research and development trend in the asymmetric ring opening reactions using cobalt salen catalysts. Hydrolytic kinetic resolution (HKR) technology is the very prominent way to prepare optically pure terminal epoxides among available methods. We have synthesized homogeneous and heterogeneous chiral dinuclear salen complexes and demonstrated their catalytic activity and selectivity for the asymmetric ring opening of terminal epoxides with variety of nucleophiles and for asymmetric cyclization to prepare optically pure terminal epoxides in one step. The resolved ring opened product combined with ring closing in the presence of base and catalyst afforded the enantioriched terminal epoxides in quantitaive yield. Potentially, these catalysts are using on an industrial scale to produce chiral intermediates. The experimental results of HKR technology applied to the synthesis of various chiral compounds are presented in this paper.

• Journal of Navigation and Port Research
• /
• v.30 no.3 s.109
• /
• pp.227-233
• /
• 2006

As North-east Chinese parts including Shanghai port grow rapidly, competition among the Far-East parts to be a hub port is getting higher, somebody has even raised a crisis of Busan port. However there are same constraints an the North-east parts such as weather aggravation and long distance from main truck routes. When we consider the competitiveness of port, weather aggravation should be considered as one of the significant factors. But previous studies have rarely examined these kinds of external factors of port operation Therefore, this study analyze constraints an the North-east Chinese parts through a survey of same national flag shipping companies and agencies of foreign shipping companies. The result shows that the mast significant constraint in the North-east ports is weather aggravation which causes problems for regular schedules of shipping, operation cast and customer service qualities etc.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.132-137
• /
• 2015

BEA-zeolite was modified by alkaline solution to introduce mesoporosity in the crystals and the homogeneous chiral Co(III) salen was immobilized in the mesopores. The dinuclear chiral Co(salen)-$GaCl_3$ catalyst immobilized on mesoporous BEA-zeolite showed high activity for the regioselective ring opening of terminal epoxides by carboxylic acids. Various chiral monoester derivatives could be synthesized with moderate enantioselectivity (47~69 ee%) from racemic epoxides through above reaction. When the chiral (S)-ECH was used as a reactant, it was efficiently resolved by carboxylic acid with a high enantioselectivity in the presence of heterogenized chiral salen catalyst, and the ring opened product afforded optically pure monoester epoxide (R)-GB (up to 98 ee%) through the ring closing in the basic solution by elimination of HCl. The heterogeneous catalyst could be fabricated easily, and the catalytic activity was retained for several times reuse without any further regeneration step.

• The Journal of the Korea Contents Association
• /
• v.6 no.1
• /
• pp.8-13
• /
• 2006

In this thesis, an automatic door lock system using a dual tone multiple frequency(DTMF) signal generated as pushing the key button of mobile phone is proposed and implemented. This system consists of a transmitter module and a receiver module for processing the DTMF signal of mobile phone. The DTMF signal of mobile phone connected with ear-phone jack enter into the input terminal of DTMF receiver and those are encoded by a code-converter with 4-bits binary format in the DTMF receiver. The encoded output signals are transmitted to the amplitude shift keying(ASK) modulator of transmitter module and the modulated ASK signals which are converted into radio frequency(RF) signals propagate in a free space. The RF signals passed through a free space are demodulated by the ASK demodulator of receiver module and the demodulated ASK signals are sent to a micro-controller unit(MCU). The output signals processed by the MCU are compared with the secreted identification number which is prerecorded in a microprocessor and are transferred to a power relay. If the result is the same, the automatic door lock system opens a door. In the opposite case, it maintains closing the door. The implemented automatic door lock system operates well in mobile environments.