• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권6호
• /
• pp.286-292
• /
• 2005

Terahertz wave is a kind of electromagnetic radiation whose frequency lies in 0.1THz $\~$10THz range. In this paper, generation and detection characteristics of terahertz (THz) radiation by photoconductive antenna (PCA) method has been described. Using modern integrated circuit techniques, micron-sized dipole antenna has been fabricated on a low-temperature grown GaAs (LT-GaAs) wafer. A mode-locked Ti:Sapphire femtosecond laser beam is guided and focused onto photoconductive antennas (emitter and detector) to generate and measure THz pulses. Ultra-wide band THz radiation with frequencies between 0.1 THz and 3 THz was observed. Terahertz field amplitude variation with antenna bias voltage, pump laser power, pump laser wavelength and probe laser power was investigated. As a primary application example. a live clover leaf was imaged with the terahertz radiation.

• 대한방사성의약품학회지
• /
• 제5권2호
• /
• pp.120-128
• /
• 2019

Radiopharmaceuticals include therapeutic radiopharmaceuticals and diagnostic radiopharmaceuticals. Therapeutic radiopharmaceuticals are administered to the body and ingested at specific organs to detect radiation emitted from the site and to construct an image to diagnose the disease. Diagnostic radiopharmaceuticals are used to treat diseases by killing cells with radiation emitted from radiopharmaceuticals, such as cancer cells, vascular endothelial cells, arthritis, and Alzheimer's disease. The application possibilities of terahertz imaging technology for the combination of radiopharmaceuticals and molecular imaging medicine are discussed and experimental methods are presented. Terahertz imaging is expected to be a powerful technique because of the effective piercing feasibility, which enables to perform safe and high resolutive imaging. To investigate the response of cell to the terahertz wave, both the pulsed and CW THz wave systems are employed. THz imaging of a rat's paraffin-embedded epithelial cell with tumor is studied in advance.

• Journal of the Optical Society of Korea
• /
• 제18권1호
• /
• pp.60-64
• /
• 2014

We report the generation of 3.3-mW single-cycle terahertz (THz) pulses at 1-kHz repetition rate via optical rectification in MgO-doped prism-cut stoichiometric LiNbO3. Efficient pulse-front tilting of 800-nm pulses was realized by an optimized single-lens focusing scheme for radially-symmetric propagation of THz beams. In this geometry, nearly-diffraction-limited THz Gaussian beams with electric field strength as high as 350 kV/cm were generated. The pump-to-THz energy conversion efficiency of $1.36{\times}10^{-3}$ and the extremely high signal-to-noise ratio of ~1:15000 achieved are among the best results for 1-kHz single-cycle terahertz pulse generation ever demonstrated in room temperature operation.

• 식품과학과 산업
• /
• 제51권1호
• /
• pp.26-36
• /
• 2018

Terahertz (THz) represents the portion of the electromagnetic radiation between the microwave and the infrared region and is within the frequency range of 0.1-10 THz. The ability of THz waves to pass through a wide variety of packaging materials, combined with their ability to characterize the molecular structure of many substances makes it an attractive tool for the application of food quality and safety management. This review provides current information on application of THz spectroscopy/imaging technology for food quality and safety management. The THz spectroscopy/imaging technology has been shown to be useful for detecting foreign bodies, vitamin/moisture, pesticides, antibiotics, melamine etc. However, major barriers to the adoption of THz spectroscopy/imaging for food quality and safety management include THz signal loss in heterogeneous food matrices, high costs of sources and detectors, and absence of a library for the wide group of food compounds. Further research is needed to overcome these barriers.

• 한국광학회지
• /
• 제12권1호
• /
• pp.1-4
• /
• 2001

테라헤르츠 레이다를 이용하여 알루미늄 거울 및 도체와 부도체로 이루어진 각각의 물질에 대한 테라헤르츠 전자기 펄스의 반사특성을 측정하였다. 알루미늄 거울로부터 반사된 테라헤르츠 펄스의 크기변화를 측정하기 위하여 최고 9회까지 테라파를 반사시켜 펄스의 크기에 대한 변화가 없음을 확인하였다. 또한 알루미늄 거울의 반사각도에 대한 테라파의 영향을 측정하였다 알루미늄 거울에 대한 반사파를 reference로 하여 알루미늄 board, 순수실리콘, quartz, 그리고 LDPE 에 대한 테라파의 반사를 측정하여 각각의 물질에 대한 테라헤르츠 영역의 반사계수와 굴절률을 측정하였다. 이러한 측정법은 sample의 두께에 무관한 비접촉 테라헤르츠 분석법의 적용이라할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.78-79
• /
• 2005

We report on optically excited terahertz (THz) omission from low-temperature (LT) grown GaAs. We have used 70 fs titanium-sapphire laser pulses with wavelengths at 800 nm to generate THz radiation pulses. The LT-GaAs layers are grown on semi-insulating GaAs substrates with GaAs buffer layer by molecular beam epitaxy (MBE). The THz emission from the LT-GaAs surface is strong and does not show any significant variation in the strength of the THz emission over several different angles between the polarization of the excitation laser pulse and the crystallographic orientation of the LT-GaAs.

• 대한방사성의약품학회지
• /
• 제6권2호
• /
• pp.102-115
• /
• 2020

In the state of Positronium (Ps), which is an unstable material created by the temporary combination of electrons and positrons, the imaging technology through photo-conversion methodology is emerging as a new research theme under resonance conditions through terahertz electromagnetic waves. Normally, Positronium can be observed in the positron emission computed tomography (PET) process when an unstable, separate state that remains after the pair annihilation of an electron and a positron remains. In this study, terahertz (THz) waves and Cherenkov radiation (CR) are generated using the principle of ponderomotive force in the plasma wake-field acceleration, and electrons and positrons are simultaneously generated by using a relativistic electron beam without using a PET device. We confirm the possibility of Positronium photoconversion technology in terahertz electromagnetic resonance conditions through experimental studies that generate an unstable state. Here, a relativistic electron beam (REB) energy of 0.5 MeV (γ=2) was used, and the terahertz wave frequencies is G-band. Meanwhile, a THz wave mode converting three-stepped axicon lens was used to apply the photoconversion technology. Through this, light emission in the form of a luminescence-converted Bessel beam can be verified. In the future, it can be used complementarily with PET in nuclear medicine in the field of medical imaging.

• 한국광학회지
• /
• 제16권6호
• /
• pp.553-559
• /
• 2005

(110) ZnTe 결정을 사용한 광정류(Optical Rectification)법에 의한 테라헤르츠파의 발생과 자유공간 전광 샘플링(Free-Space Electro-Optic Sampling; FS-EOS)법에 의한 테라헤르츠파의 검출특성에 대해서 보고한다. ZnTe 결정에 펌프용 레이저광에 대한 반사방지막 코팅을 실시함으로서 테라헤르츠파 신호크기가 $27\%$ 증가함을 알 수 있었다. ZnTe 결정의 두께가 얇을수록 테라헤르츠파의 신호의 크기는 작으나 광대역의 주파수를 가진 스펙트럼이 얻어졌다. 또한 레이저광의 편광방향과 ZnTe 결정의 (001)축사이의 각도에 따른 테라헤르츠파의 신호 변화, 펌프광 출력에 따른 테라헤르츠파의 신호크기 변화 등에 대한 특성이 조사되었다.

• 센서학회지
• /
• 제27권5호
• /
• pp.335-339
• /
• 2018

The optical characteristics of a terahertz (THz) antenna-coupled bolometer (ACB) detector were evaluated using a pulsed quantum cascade laser (QCL) and radiation blackbody sources. We investigated a method for measuring the responsivity and noise-equivalent power (NEP) of the THz detector using two different types of light sources. When using a QCL source with a frequency of 3 THz, the average responsivity of 24 devices was $1.44{\times}10^3V/W$ and the average NEP of those devices was $3.33{\times}10^{-9}W/{\surd}Hz$. The average responsivity and NEP as measured by blackbody source were $1.79{\times}10^5V/W$ and $6.51{\times}10^{-11}W/{\surd}Hz$, respectively, with the measured values varying depending on the light source. This was because the output power of each light source was different, with the laser source being driven by a pulse type wave and the blackbody source being driven by a continuous wave. The power input to the THz sensor was also different. Futhermore, the responsivity and NEP values measured using band pass filter (BPF) were similar to those measured when using only THz windows. It was found that ACB sensor responds normally in the THz region to both the laser and the blackbody source, and the method was confirmed to effectively evaluate the characteristics of the THz sensor.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.673-678
• /
• 2015

Terahertz dual-band frequency selective surface filters made by perforating two different rectangular holes in molybdenum have been designed, fabricated and measured. Physical mechanisms of the dual-band resonant responses are clarified by three differently configured filters and the electric field distribution diagrams. The design process is straightforward and simple according to the physical concept and some formulas. Due to the weak coupling between the two neighboring rectangle holes with different sizes in the unit cell, good dual-band frequency selectivity performance can be easily achieved both in the lower and higher bands by tuning dimensions of the two rectangular holes. Three samples are fabricated, and their dual-band characteristics have been demonstrated by a THz time-domain spectroscopy system. Different from most commonly used metal-dielectric structure or metal-dielectric-metal sandwiched filters, the designed dual-band filters have advantages of easy fabrication and low cost, the encouraging results afforded by these filters could find their applications in dual-band sensors, THz communication systems and other emerging THz technologies.