• The Journal of Korean Physical Therapy
• /
• v.21 no.2
• /
• pp.109-116
• /
• 2009

Purpose: $17\beta$-estradiol is the most active endogenous estrogen, which is related to favorable changes in the plasma lipid profile, to relaxation of the coronary vessels, and to a decrease in platelet aggregation and vascular smooth muscle cell migration. However, although the beneficial effect of estrogens on plasma lipoproteins (ie, lowering low-density lipoprotein and increasing high-density lipoprotein cholesterol) contributes to cardiovascular protection, it does not fully account for the protective effect, particularly in the application of physical therapy, including low frequency electrical stimulation. Methods: The aim of this study was to demonstrate the inhibition of stressors, such as endothelin-1 (ET-1), serotonin (5-hydroxytryptamine, 5-HT), prostaglandin $F2\alpha$ ($PGF2\alpha$), and a protein kinase C (PKC) activator 12-deoxyphorbol 13-isobutyrate (DPB), induced isometric tension by $17\beta$-estradiol in vascular smooth muscle strips, respectively. In addition, the effects of low frequency electrical stimulation at the meridian points (CV-3, -4, Ki-12, SP-6, LR-3, BL-25, -28, -32, -52) on the indirect antihypertensive effect were examined by monitoring the changes in the serum $17\beta$-estradiol concentration in healthy volunteers. Results: Isometric tension analysis showed that the responses of inhibited tension by $17\beta$-estradiol were similar to the same stressors in rat aortic smooth muscle strips. Furthermore, although the continued amplitude modulation (AM) type of electrical stimulation was not increased significantly by electrical stimulation, the current of the frequency modulation (FM) type of low frequency electrical stimulation increased the serum $17\beta$-estradiol concentration in normal volunteers. Conclusion: These results, in part, suggest that $17\beta$-estradiol has the capacity to supress stressor-induced muscle tension, and electrical stimulation, particularly current of the FM type, has a modulatory effect on the sex steroid hormones, particularly $17\beta$-estradiol, in healthy volunteers.

• Korea-Australia Rheology Journal
• /
• v.12 no.2
• /
• pp.107-117
• /
• 2000

Prediction of the product shape in sheet casting process is performed from the numerical simulation. A three-dimensional finite element method is used to investigate the flow behavior and to examine the effects of processing conditions on the sheet produced. Effects of inertia, gravity, surface tension and non-Newtonian viscosity on the thickness profile of the sheet are considered since the edge bead and the flow patterns in the chill roll region have great influence on the quality of the products. In the numerical simulation with free surface flows, the spine method is adopted to update the free surface, and the force-free boundary condition is imposed along the take-up plane to avoid severe singularity problems existing at the take-up plane. From the numerical results of steady isothermal flows of a generalized Newtonian fluid, it is shown that the draw ratio plays a major role in predicting the shape of the final sheet produced and the surface tension has considerable effect on the bead thickness ratio and the bead width fraction, while shear-thinning and/or tension-thickening viscosity affect the degree of neck-in.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.1
• /
• pp.137-146
• /
• 2008

Proper amount of entrained air and nip force should be also considered to minimize ballooning phenomenon since tight contact between a roller and web is required. In this paper, various web materials, PET(Polyester) and OPP(Oriented Poly Propylene) have been selected and investigated to satisfy high-speed printing requirement. Several web speeds, web tensions, and temperature conditions are imposed on each web materials and the pressure and gap profiles as well as nip force have been calculated. Increase of both the winding roller radius and the incoming wrap angle is considered under proper taper tension at 500 m/min of rewinding roller. By solving coupled Reynolds equation and web deflection equation simultaneously, the fluid-structure interaction process has been developed and is applied to the rewinding roller to investigate the ballooning phenomenon which causes guiding problems in high-speed printing performance conditions. By adjusting the linear taper tension, stress distribution between rewinding webs can be remarkably reduced and stable pressure and gap profile with ignorable ballooning phenomenon have been found.

• Wind and Structures
• /
• v.1 no.3
• /
• pp.255-269
• /
• 1998

Second-order moments of considerable magnitude arise in tall and slender RC chimneys and towers subject to along-wind loading, on account of eccentricities in the distributed self-weight of the tower in the deflected profile. An accurate solution to this problem of geometric nonlinearity is rendered difficult by the uncertainties in estimating the flexural rigidity of the tower, due to variable cracking of concrete and the 'tension stiffening' effect. This paper presents a rigorous procedure for estimating deflections and second-order moments in wind-loaded RC tubular towers. The procedure is essentially based on a generalised formulation of moment-curvature relationships for RC tubular towers, derived from the experimental and theoretical studies reported by Schlaich et al. 1979 and Menon 1994 respectively. The paper also demonstrates the application of the proposed procedure, and highlights those conditions wherein second-order moments become too significant to be overlooked in design.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.167-170
• /
• 2012

A test-area molecular dynamics simulation method for the vapor-liquid interface of argon through a Lennard-Jones intermolecular potential is presented in this paper as a primary study of interfacial systems. We found that the calculated density profile along the z-direction normal to the interface is not changed with time after equilibration and that the values of surface tension computed from this test-area method are fully consistent with the experimental data. We compared the thermodynamic properties of vapor argon, liquid argon, and argon in the vapor-liquid interface. Comparisons are made with kinetic and potential energies, diffusion coefficient, and viscosity.

• Proceedings of the KWS Conference
• /
• 1996.10a
• /
• pp.148-152
• /
• 1996

A transient two-dimensional (2D) model was developed for investigating the heat and fluid flow in old pools and determining velocity profile and temperature distribution for the Gas Metal Arc (GMA) welding process. The mathematical formulation deals with the driving farces (electromagnetic, buoyancy, surface tension and plasma drag forces) as well as energy exchange between the molten filler metal droplet and weld pools. A general thermofluid-mechanics computer program, PHOENICS, was employed to numerically solve the governing equation with the associated source terms. The results of computation have shown that the electromagnetic and surface tension farces as will as the molten filler metal droplet have major influence in shaping the weld pool geometry.

• International Journal of Ocean System Engineering
• /
• v.1 no.1
• /
• pp.28-31
• /
• 2011

An attempt was made to compute the free surface deformation due to the impact of a water droplet. The Cauchy Poisson, i.e. the initial value problem, was solved with the kinematic and dynamic free surface boundary conditions linearized. The zero order Hankel transformation and Laplace transform were applied to the related equations. The initial condition for the free surface profile was derived from a captured video image. The effect of the surface tension was not significant with the water mass used in this investigation. The computed and observed free surface deformations were compared.

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.145-148
• /
• 1995

To provide better understanding of a solder joint design criteria, mathematical models have been developed to calculate the shape of the solder fillets formed between the pad and lead. The effects of parameters such as solder volume and pad dimensions are described with this model. In this study, a systematic way to determine the design criteria of the SMT from the predicted 3D solder joint profile is proposed. The solder joint profile is calculated using the available 3D FEM code which minimizes the system energy due to the surface tension and gravity. The solder joint profiles of gullwing-type lead such as QFP and SOP are calculated for design parameters, and acceptable ranges are obtained. The result shows that the pad length is the most significant factor compared with the pad width and pad area.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1068-1071
• /
• 1996

Good shape on flat rolled product is necessary to meet today's customer quality requirement. To meet the increasing demand in quality of strip shape from downstream customers, POSCO has replaced the Automatic Shape Control(ASC) system with the existing one that had used noncontact type measuring system at No.2 Cold Rolling Mill, Pohang works in October, 1995. The strip shape is influenced by the profile, roll crown, bending control, skew control system, as well as work roll cooling system. We have used ASC to adjust those factors in Cold Rolling Mill that could get a satisfactory result, almost less than .+-.5 1-unit deviation from the target shape. However, the downstream customer(i.e. Continuos Annealing Line) wants a good shape not only at the moment of exit of roll bite, but after rolling without tension. In this investigation, the difference will be discussed and how deal with this problem.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.897-900
• /
• 2012

We examined theory for force-induced unbinding on a two-dimensional free energy surface where the internal dynamics of biomolecules is coupled with the rupture process under constant tension f. We show that only if the transition state ensemble is narrow and activation barrier is high, the f-dependent rupture rate in the 2D potential surface can faithfully be described using an effective 1D energy profile.