• 대한기계학회논문집A
• /
• 제27권11호
• /
• pp.1986-1996
• /
• 2003

Methodology based on the elastic-plastic fracture mechanics has been widely accepted in predicting the critical crack length(CCL) of pressure tubes of CANDU nuclear plants. A conservative estimate of CCL is obtained by employing the J-resistance curves measured with the specimens satisfying plane strain condition as suggested in the ASTM standard. Due to limited thickness of the pressure tubes the curved compact tension(CT) specimens taken out from tile pressure tube have been used in obtaining J-resistance curves. The curved CT specimen inevitably introduce slant fatigue crack during precracking. Hence, effect of specimen geometry and slant crack on J-resistance curve should be explored. In this study, the difference of J integral values between the standard CT specimens satisfying plane strain condition and the nonstandard curved CT with limited thickness (4.2mm) is estimated using finite element analysis. The fracture resistance curves of Zr-2.5Nb obtained previously by other authors are critically discussed. Various finite element analysis were conducted such as 2D analysis under plane stress and plane strain conditions and 3D analysis for flat CT, curved CT with straight crack and curved CT with slant crack front. J-integral values were determined by local contour integration near the crack tip, which was considered as accurate J-values. J value was also determined from the load versus load line displacement curve and the J estimation equation in the ASTM standard. Discrepancies between the two values were shown and suggestion was made for obtaining accurate J values from the load line displacement curves obtained by the curved CT specimens.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.937-946
• /
• 1986

본 논문에서는 이와 같은 점을 고려하여 두께가 얇은 평면응력 상태의 CT 시 험편을 이용하여 W와 z의 변화에 따른 파괴인성치와 J저항곡선의 거동 및 크랙성장을 고려한 J적분식도 검토하였다. 또한, 재료를 변형경화 재료로 가정하고 HRR 응력변 형율장의 특성을 이용하여 컴퓨터 프로그램을 작성하여 J적분을 구한 후 실험치와 상 호 비교 검토하였다. 이 때 사용한 입력자료는 실험치의 그것과 동일하게 하였다.

• Steel and Composite Structures
• /
• 제38권2호
• /
• pp.151-164
• /
• 2021

During the pipe forming process, a steel plate undergoes inelastic behavior multiple times under a load condition repeating tension and compression in the circumferential direction. It derives local reduction or increase of yield strength within the thickness of steel pipes by the plastic hardening and Bauschinger effect. In this study, a combined hardening model is proposed to effectively predict variations of yield strength in the circumferential direction of API-X65 and X70 steel pipes with relatively low t/D ratio during the forming process, which is expected to experience accumulated plastic strain of 2~3%, the typical Lüder band range in a low-carbon steel. Cyclic tensile tests of API-X65 and X70 steels were performed, and the parameters of the proposed model for the steels were calibrated using the test results. Bending-flattening tests to simulate repeated tension and compression during pipe forming were followed for API-X65 and X70 steels, and the results were compared with those by the proposed model and Zou et al. (2016), in order to verify the process of material model calibration based on tension-compression cyclic test, and the accuracy of the proposed model. Finally, parametric analysis for the yield strength of the steel plate in the circumferential direction of UOE pipe was conducted to investigate the effects of t/D and expansion ratios after O-forming on the yield strength. The results confirmed that the model by Zou et al. (2016) underestimated the yield strength of steel pipe with relatively low t/D ratio, and the parametric analysis showed that the t/D and expansion ratio have a significant impact on the strength of steel pipe.

• 한국강구조학회 논문집
• /
• 제20권5호
• /
• pp.609-616
• /
• 2008

국가경제력 향상과 함께 바다와 섬에 대한 관심이 높아지면서 육지와 섬, 섬과 섬을 연결하는 해상 장대교량이 많이 건설되고 있다. 장대교량은 현수교, 사장교, 아치교, 트러스교 등으로 대변할 수 있는데 그 중에서도 사장교는 주탑(Pylon)과 케이블(Cable), 보강형(Stiffened Girder)이 조화를 이루면서 외관이 아름다워 매력적인 교량형식의 하나로 최근 많이 계획되고 있다. 장력측정은 케이블에 설치한 가속도 센서로부터 케이블의 고유진동수 변화를 이용하는 간접법인 진동법을 적용하였다. 본 연구에서는 댐퍼 설치 케이블의 유효길이 산정식을 제안하였는데 이는 케이블의 유효길이 변화를 실측치와 해석값을 비교하여 분석한 것으로 기존의 유효길이 산정방법인 댐퍼와 정착단간의 순간격에 의한 것은 최종 케이블 장력값 추정에 있어서 신뢰도가 떨어짐을 확인할 수 있었다. 그러므로 향후 유지관리 단계에서는 본 연구에서 제안한 케이블의 유효길이 산정식을 활용하여 장력을 정확하게 파악하는 것이 케이블의 재긴장 및 교체시기 결정 등에도 합리적인 의사결정 자료로 사용될 수 있을 것이다.

• 수산해양기술연구
• /
• 제32권2호
• /
• pp.132-147
• /
• 1996

The optimal design of floating type fisheries facilities in the open sea is demanded considering with the severe hydrodynamic forces on floating body, mooring tension and holding force of anchor. For conserving the facilities in most effective state, design and selection of anchor system is one of the most important fundamental subject. To enhance the design procedure of anchor system the holding forces of anchor are investigated by the hydraulic model test and are compared with the typical conventional results for various anchors. Applicability of previous estimation methods of holding force are checked and holding mechanism of anchor is discussed. Using the results a new computational concept of holding force is suggested considering mainly the effects of passive soil pressure (resistance), steady soil pressure, and surface friction etc. The new estimation method is proved as a feasible one by comparing the results of hydraulic model experiments. Applicability of various anchors to the anchor system on open sea fisheries structures is comprehensively reviewed using the present model tests and previous study results in the viewpoint of economy, construction and stability etc. Using the results, fundamental anchoring system design procedures are suggested to apply huge marine ranching complex with increase of the holding capacity of anchor under the optimum cost.

• Structural Engineering and Mechanics
• /
• 제38권5호
• /
• pp.675-696
• /
• 2011

It is difficult to accurately predict the flexural strength of prestressed members with unbonded tendons, unlike that of prestressed members with bonded tendons, due to the unbonded behavior between concrete and tendon. While there have been many studies on this subject, the flexural strength of prestressed members with unbonded tendons is still not well understood, and different standards in various countries often result in different estimation results for identical members. Therefore, this paper aimed to observe existing approaches and to propose an improved model for the ultimate strength of prestressed members with unbonded tendons. Additionally, a large number of tests results on flexural strength of prestressed members with unbonded tendons were collected from previous studies, which entered into a database to verify the accuracy of the proposed model. The proposed model, compared to existing approaches, well estimated the flexural strength of prestressed members with unbonded tendons, adequately reflecting the effects of influencing factors such as the reinforced steel ratio, the loading patterns, and the concrete strength. The proposed model also provided a reasonably good estimation of the ultimate strength of over-reinforced members and high-strength concrete members.

• International Journal of CAD/CAM
• /
• 제7권1호
• /
• pp.31-40
• /
• 2007

Reverse engineering of reliefs aims to turn an existing relief superimposed on an underlying surface into a geometric model which may be applied to a different base surface. Steps in this process include segmenting the relief from the background, and describing it as an offset height field relative to the underlying surface. We have previously considered relief segmentation using a geometric snake. Here, we show how to use this initial segmentation to estimate the background surface lying under the relief, which can be used (i) to refine the segmentation and (ii) to express the relief as an offset field. Our approach fits a B-spline surface patch to the measured background data surrounding the relief, while tension terms ensure this background surface smoothly continues underneath the relief where there are no measured background data points to fit. After making an initial estimate of relief offset height everywhere within the patch, we use a support vector machine to refine the segmentation. Tests demonstrate that this approach can accurately model the background surface where it underlies the relief, providing more accurate segmentation, as well as relief height field estimation. In particular, this approach provides significant improvements for relief concavities with narrow mouths and can segment reliefs with small internal holes.

• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.1004-1014
• /
• 2001

The fully automatic algorithm from initial finite element mesh generation to remeshing in two dimensional geometry is introduced using bubble packing method (BPM) for finite element analysis. BPM determines the node placement by force-balancing configuration of bubbles and the triangular meshes are made by Delaunay triangulation with advancing front concept. In BPM, we suggest two node-search algorithms and the adaptive/recursive bubble controls to search the optimal nodal position. To use the automatically generated mesh information in FEA, the new enhanced bandwidth minimization scheme with high efficiency in CPU time is developed. In the remeshing stage, the mesh refinement is incorporated by the control of bubble size using two parameters. And Superconvergent Patch Recovery (SPR) technique is used for error estimation. To verify the capability of this algorithm, we consider two elasticity problems, one is the bending problem of short cantilever beam and the tension problem of infinite plate with hole. The numerical results indicate that the algorithm by BPM is able to refine the mesh based on a posteriori error and control the mesh size easily by two parameters.

• 한국산학기술학회논문지
• /
• 제17권6호
• /
• pp.39-44
• /
• 2016

최근의 이상기후로 인하여 수공구조물의 안전성이 재고되고 있으며, 이에 따라 수공구조물의 붕괴에 대한 연구가 증가하고 있다. 특히 제방 등 수공구조물의 월류로 인한 붕괴로 발생하는 홍수파 선단의 초기 이동속도는 제내지의 위험성을 예측하고, EAP(Emergency Action Plan) 등을 수립하는 기초자료가 된다. 이러한 선단홍수파의 정확한 예측을 위해 수리실험이 다수 수행되고 있으나, 많은 연구에서 초기의 홍수파 선단에서 발생하는 표면장력에 의한 축척효과(Scale effect)를 고려하지 않고 있는 실정이다. 이에 본 연구에서는 계면활성제(surfactant)와 영상 분석 장비를 이용한 표면장력 도출 수리실험 및 급 개폐가 가능한 수조를 이용한 홍수파 전파 실험을 통하여, 계면활성제 농도와 표면장력 관계, 표면장력과 홍수파 전파속도 관계, 표면장력과 Weber Number 관계를 도출하여, 초기 홍수파 선단에서 발생하는 표면장력에 의한 축척효과 보정계수 및 축척효과를 받지 않는 한계조건(critical condition)을 제시하였다. 연구결과 Weber Number가 약 12.2 이하일 경우 보정 계수가 필요한 것으로 나타났으며, 그 이상인 경우 축척효과를 무시할 수 있는 것으로 나타났다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.95-102
• /
• 1994

This paper presents a Cable Stayed Bridge Construction Management System, which consists of Structural System Identification Method (SSIM), Error Sensitivity Analysis and Optimum Error Adjustment & Prediction System. The 1st System Identification Method builds an error influence matrix using the linear superposition of each error modes. The 2nd SSIM also considers the second error mode term, which shows good error factor estimation. The optimal cable adjustment can be accomplished within the allowable range of both cable tension and camber. The Post processor, constituted with Motif and GL library on SGI platform, is useful for monitoring construction stage management by displaying construction data, adjustment and prediction results at each construction step.