• 한국지반공학회논문집
• /
• 제37권8호
• /
• pp.25-35
• /
• 2021

현재 국내에서는 비탈면 및 구조물 안정성 확보를 목적으로 네일, 록볼트 등과 함께 그라운드 앵커 공법을 사용하고 있다. 이 중 장기목적으로 사용되는 영구앵커의 경우 사용기간 중 지지력과 내구성이 확보되어야 하나, 최근 연구 결과에 따르면 장기거동에 따른 잔존 긴장력 감소와 비탈면 변형 등의 현상이 보고되고 있다. 이와 같은 잔존 긴장력 감소 문제는 앞으로 지속적으로 증가될 것으로 전망되며, 이로 인한 유지관리 비용 증가 등의 문제가 불가피할 것으로 보인다. 이에 본 연구에서는 국내·외 문헌연구를 통해 영구앵커의 긴장력에 영향을 미치는 요인들을 파악하였으며, 과거 수행된 하중계 모니터링 자료를 분석한 선행연구들을 조사하였다. 이후, 이를 기초자료로 활용하여 실제 현장에서 수집한 하중계 계측자료를 분석하여 앵커의 긴장력 감소현황을 파악하였고, 그 장기하중감소특성을 분석하였다. 마지막으로 앞의 내용을 종합하여, 설치 직후 100일 부근의 단기 데이터를 통해 영구앵커의 장기하중감소특성을 예측하는 기법을 제안하였다.

• Structural Engineering and Mechanics
• /
• 제66권4호
• /
• pp.445-452
• /
• 2018

In this paper the effects of particle size and model scale of concrete have been investigated on point load index, tensile strength, and the failure processes using a PFC2D numerical modeling study. Circular and semi-circular specimens of concrete were numerically modeled using the same particle size, 0.27 mm, but with different model diameters of 75 mm, 54 mm, 25 mm, and 12.5 mm. In addition, circular and semi-circular models with the diameter of 27 mm and particle sizes of 0.27 mm, 0.47 mm, 0.67 mm, 0.87 mm, 1.07 mm, and 1.27 mm were simulated to determine whether they can match the experimental observations from point load and Brazilian tests. The numerical modeling results show that the failure patterns are influenced by the model scale and particle size, as expected. Both Is(50) and Brazilian tensile strength values increased as the model diameter and particle sizes increased. The ratio of Brazilian tensile strength to Is(50) showed a reduction as the particle size increased but did not change with the increase in the model scale.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.103-110
• /
• 2013

PURPOSES: The objective of this study is to analyze and evaluate the behavior of orthotropic steel bridge deck pavement using three-dimensional finite element analysis and full-scale wheel load testing. METHODS: Since the layer thickness and material properties used in the bridge deck pavement are different from its condition, it is very difficult to measure and access the behavior of bridge deck pavement in the field. To solve this problem, the full-scale wheel load testing was conducted on the PSMA/Mastic bridge deck pavement and the deflection of bridge deck and horizontal tensile strain on top of pavement were measured under the loading condition. Three-dimensional finite element analysis was conducted to predict the behavior of bridge deck pavement and the predicted deflection and tensile strain values are compared with measured values from the wheel loading testing. RESULTS: Test results showed that the predicted deflections are 10% lower than measured ones and the error between predicted and measured horizontal tensile strain values is less than 2% in the critical location. CONCLUSIONS: The fact indicates that the proposed the analysis is found to be accurate for estimating the behavior of bridge deck pavements.

• Journal of Welding and Joining
• /
• 제34권4호
• /
• pp.28-33
• /
• 2016

The purpose of this study is to evaluate the redistribution of transverse residual stress in the multi-pass FCA butt weld of YP47 in the hatch coaming top plate of ultra large size containership under the tensile cyclic load. In order to do it, the configuration of modified H type specimen including restraint length was first designed to simulate the restraint condition of the butt weld in hatch coaming top plate. FE analysis procedure for evaluating the transverse residual stress was verified by comparing the calculated mean and surface residual stresses with the measured results in the test specimen. After that, the effect of the cyclic load on the redistribution of transverse residual stress was evaluated by comprehensive FEA. From the results, it was found that although the maximum transverse residual stress decreased with an increase in the applied maximum load, the effect of the cyclic load on the mean residual stress is small enough to be negligible. It is because the maximum stress of the ship corresponding to the probability of 10E-8 is less than 70% of yield stress of the weld.

• 콘크리트학회지
• /
• 제6권2호
• /
• pp.159-168
• /
• 1994

본 논문에서는 비틀림을 받는 프리스트레스트 콘크리트 부재의 거동에 대한 합리적인 해석법을 연구 하였다. 이를 위하여 콘크리트 균열 이전 이후의 인장강성을 합리적으로 고려한 이론을 제시하였다. 또한 이축응력상태하의 콘크리트의 압축강도와 인장강도에 대한 영향효과를 실제적으로 고려하였다. 연구결과 균열비틀림강도와 극한비틀림강도는 실험치와 잘 일치하였으며 따라서 본 논문에서 제시한 이론은 합리적인 것으로 나타났다. 그리고 사용하중상태 뿐만 아니라 극한하중상태까지 전하중이력에 대한 거동을 해석함으로써 비틀림을 받는 프리스트레스트 콘크리트 부재의 좀 더 실제적인 해석을 가능하게 하였다.

• Steel and Composite Structures
• /
• 제46권1호
• /
• pp.115-132
• /
• 2023

The present study experimentally and analytically investigates the effect of tensile reinforcement ratio and arrangement on the behavior of FRP strengthened reinforced concrete (RC) beams. The experimental part of the program was comprised of 8 RC beams that were tested under four-point bending. Results have shown that by keeping the total cross-section area of tensile reinforcing bars constant, in specimens with a low reinforcement ratio, increasing the number and decreasing the diameter of bars in the section lead to 21% and 29% increase in the load-carrying capacity of specimens made with normal and high compressive strength, respectively. In specimens with high reinforcement ratio, a different behavior was observed. Furthermore, the accuracy of the existing code provisions and analytical models in predicting the load-carrying capacity of the FRP strengthened beams failed by premature debonding mode were evaluated. Herein, a model is proposed which considers the tensile reinforcement ratio (as opposed to code provisions) to achieve more accurate results for calculating the load carrying capacity of FRP strengthened RC beams.

• Steel and Composite Structures
• /
• 제35권5호
• /
• pp.611-625
• /
• 2020

Experimental investigation and finite element analysis of corroded cold-formed steel (CFS) columns are presented. 11 tensile coupon specimens and 6 stub columns of corroded CFS that had a channel section of C160x60x20 were subjected to monotonic tensile tests and axial compression tests, respectively. The degradation laws of the mechanical properties of the tensile coupon specimens and stub columns were analysed. An appropriate finite element model for the corroded CFS columns was proposed and the influence of local corrosion on the stability performance of the columns was studied by finite element analysis. Finally, the axial capacity of the experimental results was compared with the predictions obtained from the existing design specifications. The results indicated that with an increasing average thickness loss ratio, the ultimate strength, elastic modulus and yield strength decreased for the tensile coupon specimens. Local buckling deformation was not noticeable until the load reached about 90% of the ultimate load for the non-corroded columns, while local buckling deformation was observed when the load was only 40% of the ultimate load for the corroded columns. The maximum reduction of the ultimate load and critical buckling load was 57% and 81.7%, respectively, compared to those values for the non-corroded columns. The ultimate load of the columns with web thickness reduced by 2 mm was 53% lower than that of the non-corroded columns, which indicates that web corrosion most significantly affects the bearing capacity of the columns with localized corrosion. The results predicted using the design specifications of MOHURD were more accurate than those predicted using the design specifications of AISI.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.307-310
• /
• 1999

In this panel test, the toughness and post-cracking tensile strength of SFRC(Steel Fiber Reinforced Concrete) measured on 24 panels(size; 60cm $\times$ 60cm $\times$ 10cm) which are the basic characteristics than can determine the load bearing capacity of SFRC are investigated. Those values are calculated using load-deflection curves and load-absorbed energy curves. Post-cracking tensile strength of SFRC in this study are determined by yield line theory. From the test results, it is seen that the higher the volume of steel fiber is, the higher the absorbed energy is.

• Restorative Dentistry and Endodontics
• /
• 제12권2호
• /
• pp.45-53
• /
• 1987

The purpose of this study was to evaluate the tensile bond strength between composite resin and the human enamel. Three composite resin systems, two chemical (Clearfil Posterior, and Clearfil Posterior-3) and one light cure (Photo Clearfil-A), used with and without an intermediate resin (clearfil bonding agent), were evaluated under different amounts of load (10g, 200g and 200g for a moment) for in vitro tensile bond strength to acid-eched human enamel. Clinically intact buccal or lingual surfaces of 144 freshly extracted human permanent molars, embedded in acrylic were flattened with No #600 carborundum discs. Samples were randomly assigned to the different materials and treatments using a table of random numbers. Eight samples were thus prepared for each group(Table 2) these surfaces were etched with an acid etchant (Kurarey Co. Japan) in a mode of etching for 30 seconds, washing for 15 seconds, and drying for 30-seconds. During the polymerization of composite resin on the acid-etched enamel surfaces with and without bonding agent 10-gram, 200 gram and temporary 200 gram of load were applied. The specimens were stored in 50% relation humidity at $37^{\circ}C$ for 24 hours before testing. An universal Testing machine (Intesco model No. 2010, Tokyo, Japan) was used to apply tensile loads in the vertical directed (fig 5), and the force required for separation was recorded with a cross head speed of 0.25 mm/min and 20 kg in full scale. The results were as follow: 1. The tensile bond strength was much greater in applying a bonding agent than in not doing that. 2. The tensile bond strength of chemical cure composite resin was higher than that of light cure composite resin with applying on bonding agent on the acid-etched enamel. 3. In case of not applying a bonding agents on the acid-etching enamel, the highest tensile bond strength under 200 gram of load was measured in light cure composite resin. 4. The tensile bond strength under 200-gram of load has no relation with applying the bonding agent. 5. Under the load of 10-gram, There was significant difference in tensile bond strength as applying the bonding agent.

• 한국산학기술학회논문지
• /
• 제12권6호
• /
• pp.2866-2871
• /
• 2011

본 연구에서는 생태축조블록을 적용한 보강토 옹벽의 국부적 안정성 검토에 필요한 보강재 인장력 계산법을 정립하고 국부적 안정성 검토와 관련한 주요 설계인자인 보강재와 블록 사이의 연결강도와 블록 접촉면 사이의 전단강도를 시험을 통해 규명하였다. 연결강도 시험결과에 따르면 생태축조블록의 내부를 흙으로 속채움하고 D13 이형철근을 사용할 경우 첨두 하중값은 이형철근의 허용인장력 정도임을 알 수 있었으며 D16 이형철근을 사용할 경우 첨두하중값은 허용인장력의 76% 정도였다. 생태축조블록의 내부를 콘크리트로 속채움하는 경우에 있어서 D10, D13 이형철근을 사용하였을 때의 연결강도는 각각의 이형철근의 허용인장력보다 크게 나타났다. 생태축조블록의 접촉면 전단시험결과를 통해 구한 전단저항 매개변수인 ${\alpha}_u$는 1.7kN/m 이었고 ${\lambda}_u$는 $27.6^{\circ}$ 이었다.