• 대한가정학회지
• /
• 제17권1호
• /
• pp.1-9
• /
• 1979

The damaging effects of hemp and cotton by Aspergillus sp, and penicillum sp, which grow successfully on cotton were studied. The damages were measured after cultivated at $30^{\circ}C$ for 10 days the fabrics with Aspergillus sp,and Penicillum sp, respectically, in various conditions. The effects of cell-free extract produced from fungus were also investigated. The results of obtained could be summeried as follows : 1) Cultivation of fungi on fibre in malt extract agar was better than that in czapeck agar. 2) Tnsile strength of the fabrics was deteriortated most easily in czapeak agar at the rae of 49.8%. 3)Growth of fungi was promoted by starching the fibre but tensile strength was felled -off , however, by starching, propagation of fungi was superior on cotton to on hemp. 4) In case of hemp, propagation of fungi was inferior to in case of cotton but the tensile strength was deteriorated at the rate of 26-33%. 5) In case of starched hemp, the tensile strength was deteriorated Slowly in first 8 days, but after 8 days there was no particular change. There was no particular change of tensile strength by starching in cotton. 6) It seemed that a damage of fibre was accelerated because the fungus grow not only on the surface of fabrics but also the inner of those. 7) By treatment of cell-free produced form fungi, the tensile strength of hemp falled off at the rate of 50-65% in first 24 hours, since then the tensile strength was deteriorated slowly for 4 days, but after incubation for 4 days was not changed. But the tensile strength of cotton by cell-free extracts was not effected.

• 자원리싸이클링
• /
• 제26권6호
• /
• pp.20-28
• /
• 2017

피치계 탄소섬유를 함유한 모르타르의 직접인장강도는 평균압축강도의 1/27~1/22에 해당하였다. 동일 양의 PAN계 탄소섬유를 함유한 모르타르의 직접인장강도가 1/15임에 비하여, 낮은 수준으로 나타났다. 이 때, 무보강 기준시편의 직접인장강도는 1/29 수준이었다. 피치계 탄소섬유를 함유한 모르타르의 휨인장강도는 평균압축강도에 비해, 약 1/12 수준으로 나타났고, PAN계 탄소섬유를 함유한 모르타르와 무보강 모르타르는 각각 1/10, 1/13.5의 수준으로 나타났다. 피치계 탄소섬유를 혼입한 모르타르의 인장성능은 무보강 모르타르와 PAN계 탄소섬유를 혼입한 모르타르의 중간 수준으로 나타났다.

• 한국공간구조학회논문집
• /
• 제10권1호
• /
• pp.51-58
• /
• 2010

ETFE 필름 막재는 Ethylen Tetra Fluoro Etylene의 약자로, 무색의 투명한 막재료이다. ETFE 필름 막재는 내화학성이 있고 매우 가벼운 장점이 있는 것으로 알려져 있다. ETFE 필름 막재는 $50{\mu}m$에서 $300{\mu}m$의 두께가 주로 사용되며, 인장강도는 40MPa에서 60MPa 300%에서 400%정도이다. 본 연구에서는 최근 해외에서 초대형 박구조물의 박재료로 시용되는 ETFE 필름 막재에 대한 기초적 역학적 특성을 조사하기 위하여 인장시험을 수행하였다. 인장시험으로부터 인장강도, 인장연신율, 영계수(Young's Modulus) 등 건축 설계 시 필요한 기초적 자료를 제공하고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.537-538
• /
• 2009

본 연구에서는 UHPC에서 섬유혼입률의 변화에 따른 휨실험체에서의 초기균열강도 및 휨인장강도의 변화를 파악하기 위해 섬유혼입률 5% 범위 내에서 휨실험을 수행하였으며, 그 결과로부터 UHPC에서 초기균열강도 및 휨인장강도는 섬유혼입률이 늘어남에 따라 선형적으로 증가함을 알 수 있었다.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1153-1163
• /
• 2013

접착식 콘크리트 덧씌우기는 기존 콘크리트 포장과의 재료물성이 유사하여 적절한 유지보수 공법으로 제시되고 있으며, 덧씌우기층과 기존 포장층이 완전부착을 통한 일체화 거동을 하여 우수한 구조적 성능을 확보할 수 있다. 따라서 접착식 콘크리트 덧씌우기의 장기 공용성을 위하여 적절한 부착강도 기준을 확보하는 것이 매우 중요하다. 본 연구에서는 다양한 부착 특성이 부착강도에 미치는 영향을 고찰하고자 하였으며, 덧씌우기 재료, 기존 포장의 압축강도 및 휨강도 변화, 기존 포장의 열화상태 등 다양한 부착조건에 대한 직접인장 및 간접인장 실험을 실시하여 도출되는 부착강도를 비교 분석하고자 하였다. 연구 결과, 직접인장실험에 의한 부착강도가 간접인장실험에 의한 부착강도보다 상대적으로 높게 분포하는 경향을 나타내고 있으나, 결정계수 0.75 및 P-value 0.002의 높은 부착강도 상관관계를 확보하였다. 이를 통하여 접착식 콘크리트 덧씌우기의 실제 현장 거동을 모사할 수 있는 반복하중에 의한 부착 피로 특성 분석 시 직접인장 및 간접인장 실험의 상관관계를 활용할 수 있을 것으로 판단된다.

• 한국강구조학회 논문집
• /
• 제12권6호
• /
• pp.649-659
• /
• 2000

본 연구에서는 고장력 용접구조용 압연강재인 SM570을 건축구조용으로 사용하기 위해서 판두께에 따른 화학성분과 기계적 성질의 분포특성을 정량적으로 평가하였다. 또한 건축구조용 강재로 주로 사용되는 일반구조용 압연강재인 SS400과 용접구조용 압연강재인 SM490을 비교재로 사용해서 SM570 강재와 비교 평가하였다. 본 연구결과 모든 두께에서 SM570 강재의 화학성분, 탄소당량, 용접 갈라짐 감수성 조성과 항복강도, 인장강도, 연신률 및 충격강도는 한국산업규격을 만족하였다.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.1-8
• /
• 2007

The present study examined the mechanical properties of the friction welding zone of solid and hollow shafts made with SM20C according to the depth of the notch. Friction welding was conducted at welding conditions of 2,000 rpm, friction pressure of 60MPa, friction time of 1.4 seconds, upset pressure of 100MPa, and upset time of 2.0 seconds. In the tensile strength test, the tensile strength decreased as the depth of the notch increased. Tensile strength was moderately high when the depth of the notch was 2mm. The tensile strength of the welding zone increased as the friction revolution radius increased, because the latter led to the generation of adequate friction heat. According to the hardness test, hardness likewise increased as e friction revolution radius increased. In the bending test, the bend strength of the solid shaft decreased when the depth of the notch was 0-2mm but increased when the latter was 3-5mm. With regard to the hollow shaft, the bend strength drastically decreased when the depth of the notch was 3-4mm. Upon examination it was found that the microstructure became finer when the friction revolution radius increased.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.181-182
• /
• 2021

Selecting a proper tile cement for ceramic tile is important to secure tile construction quality. But there is some ambiguity in standards about evaluating adhesion test such as using KS L 1593 in Lab test but using KS L 1592 in site. So, this study aims to how to select proper tile cement for securing adhesion strength in site considering both tensile and shear adhesion strength of cement for ceramic tile. Also, when doing tensile adhesion test in site, there may be adhesion drop because of cutting tile with grinder. As a result, drop of adhesion strength is about 9% ans quality manager consider these factor and should select proper tile cement.

• 한국농공학회논문집
• /
• 제47권4호
• /
• pp.25-32
• /
• 2005

This study was performed to evaluate the strength properties of polymer concrete using recycled aggre-gate. The compressive strength, splitting tensile strength, flexural strength and pulse velocity of polymer concrete were decreased with increasing the content of recycled aggregate. At the curing age of 7days, the compressive strength was $80.5\~88.3$ MPa, the splitting tensile strength was $9.1\~10.6$ MPa, the flexural strength was $19.2\~21.5$ MPa and the pulse velocity was $3,931\~4,041$ m/s, respectively. Also, the compressive strength, splitting tensile strength, flexural strength and pulse velocity of concrete using recycled fine aggregate were higher than that of the silica sand. Therefore, these recycled aggregate polymer concretes were estimated for high strength concrete without major problem.

• Computers and Concrete
• /
• 제21권3호
• /
• pp.231-237
• /
• 2018

A strain-hardening highly ductile composite based on an alkali-activated slag binder and synthetic fibers is a promising construction material due to its excellent tensile behavior and owing to the ecofriendly characteristics of its binder. This study investigated the effect of different types of synthetic fibers and water-to-binder ratios on the compressive strength and tensile behavior of slag-based cementless composites. Alkali-activated slag was used as a binder and water-to-binder ratios of 0.35, 0.45, and 0.55 were considered. Three types of fibers, polypropylene fiber, polyethylene (PE) fiber, and polyparaphenylene-benzobisethiazole (PBO) fiber, were used as reinforcing fibers, and compression and uniaxial tension tests were performed. The test results showed that the PE fiber series composites exhibited superior tensile behavior in terms of the tensile strain capacity and crack patterns while PBO fiber series composites had high tensile strength levels and tight crack widths and spacing distances.