• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.245-248
• /
• 2005

This paper is concerned with manufacturing technology of thin foil tensile specimen using CIP(Cold Isostatic Press) and measurement of precision mechanical property. This thin foil tensile specimen manufacturing technology is a method that can make a metal thin foil specimen for micro tensile testing. We can get a burr free micro metallic thin foil specimen using this technology. For testing mechanical property of this micro thin foil, we use a nano scale material testing machine that was developed by KITECH. In this paper, micro tensile specimens of nickel and copper thin foil are fabricated with CIP and precision mechanical properties of these materials could be measured. We will expect that precision mechanical property of micro/nano material and component. Micro and Nano mechanical property can be measured using this technology and mechanical property data base of micro/nano material and component can be constructed.

• 대한가정학회지
• /
• 제42권8호
• /
• pp.203-218
• /
• 2004

Recently, knitted materials are used more often than ever before in fashion. Therefore it is necessary to study their application into garment patterns. The purpose of this study was to develop a system by which the tensile property of knitted fabrics can be applied. In this study, 5 different distribution methods of tensile property were tested on 2 sample fabrics which have a lower and higher tensile property than moderate-stretch. The subjects were five women within an age range from 18 to 24 who showed average body figures. The major findings derived from this investigation were as follows; The 4th method was regarded as the most valid. The 4th method was fixed proportional alteration based on the reduction amount of bust girth, i.e. front (back) width and shoulder width reduced by 60％ of the bust girth reduction and neck point reduced by 28％ of the bust girth reduction. When the reduction was based on the proportion of the actual measurements, the alteration was too severe, so that the armhole curve was changed into a very uncomfortable curve.

• 열처리공학회지
• /
• 제16권3호
• /
• pp.127-133
• /
• 2003

The effect of chemical composition on the microstructural change and tensile property in TRIP-assisted steels with different chemical composition was investigated by using SEM, TEM, XRD and UTM. As a result of microscopic observation, the morphology of retained austenite could be identified as two types; a granular type in a steel containing higher Si and a film type in a steel having higher C. For the case of higher C-containing steel with a tensile strength of 860 MPa and a total elongation of 38%, film-typed retained austenite could be observed between lath bainitic ferrite. Actually, metastable retained austenite was a requisite for the good formability, which means that chemical composition plays a significant role in the microstructure and tensile property of TRIP-assisted steels. With respect to tensile property, the steels containing suitable Si and Mn, respectively, showed a typical TRIP effect in stress-strain curve, while a steel containing higher Mn content exhibited the similar behavior shown in dual phase steel.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.106-113
• /
• 2007

The effect of chemical composition on the microstructural change and tensile property in TRIP-assisted steels with different chemical composition was investigated by using SEM, TEM, XRD and UTM. As a result of microscopic observation, the morphology of retained austenite could be identified as two types : a granular type in a steel containing higher sillicon and a film type in a steel having higher carbon. For the case of higher carbon-containing steel with a tensile strength of 860 MPa and a total elongation of 38%, film-typed retained austenite could be observed between lath bainitic ferrite. Actually, metastable retained austenite was a requisite for the good formability, which means that chemical composition plays a significant role in the microstructure and tensile property of TRIP-assisted steels. With respect to tensile property, the steels containing suitable silicon and manganese, respectively, showed a typical TRIP effect in stress-strain curve, while a steel containing higher manganese content exhibited the assimilar behavior shown in dual phase steel.

• 소성∙가공
• /
• 제14권6호
• /
• pp.509-513
• /
• 2005

This paper is concerned with manufacturing technology of thin foil tensile specimen using CIP(Cold Isostatic Press) and measurement of precision mechanical properties using micro tensile testing. We can get a burr free micro metallic thin foil specimen using this technology. For testing mechanical property of this micro thin foil, we use a nano scale material testing machine that was developed by KITECH. In this paper, micro tensile specimens of nickel and copper thin foil are fabricated with CIP and precision mechanical properties of these materials could be measured. We will expect precision mechanical property of micro/nano material and component.

• 대한가정학회지
• /
• 제42권10호
• /
• pp.153-171
• /
• 2004

The purpose of this study was to develop a system by which the tensile properties of knitted fabrics can be applied. In this study, 3 different conditions of tensile property were tested on 8 sample fabrics with various stitches and stretch ranges. The subjects were five women of age from 18 to 24 years showing average body figures. The major findings derived from this investigation were as follows: The tensile properly of 12gf/cm was considered as appropriate for applying into the pattern alteration in the case of moderate stretch(course, $25\~35\%$) or over samples. However, for the stable stretch(course, under $20\%$) fabrics, such as Milano rib stitch, a tensile properly of 20gf/cm was regarded as more valid.

• 펄프종이기술
• /
• 제38권4호
• /
• pp.61-67
• /
• 2006

The effect of several inorganic flame-retardants such as ammonium phosphate, ammonium sulfate, aluminum hydroxide and antimony trioxide on the flame-retardant property and tensile strength of paper has been investigated. Flame-retardants were used preferably as a dry powdered mixture and added to the furnish. Both dipping and coating treatments were employed to apply flame-retardants to paper Flame-retardant paper was manufactured by treatment of $5{\sim}30%$ flame-retardants by weight of the paper on a dry weight. Paper's flame-retardant property and tensile strength were examined by comparison of char length and tensile index. As dosages of flame-retardant chemicals increased, flame-retardant property was improved but tensile index was decreased.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.782-785
• /
• 1997

In this study, the spectra was surface-treated using $Ar^+$ ion beam to improve the tensile property of spectra/vinylester composites. The effect of surface treatment on the tensile property of spectra/vinylester composites was investigated comparing tensile strength and stiffness of surface-treated spectra/vinylester composites with those of untreated spectra/vinylester composites. The results showed that the tensile strength and stiffness of surface-treated s spectra/vinylester composites were 12% and 22% higher than those of untreated spectra/vinylester composites.

• 한국표면공학회지
• /
• 제35권4호
• /
• pp.206-210
• /
• 2002

The use of Spectra fibers as fiber cloth is increasing because of their excellent impact resistance. However, a major limitation on the use of Spectra fibers is a chemical inertness. In this Study, Spectra fibers were surface-treated using Ar$^{+}$ ion beam under oxygen environment to improve the tensile property of Spectra/vinylester composites. The effect of surface treatment of Spectra fibers on the tensile property of Spectra/vinylester composites was determined from tensile tests using Spectra/vinylester composite specimens with and without a hole. It was found that the tensile stiffness and strength of surface-treated case were 22% and 17% higher than those of untreated case for specimens with no hole. The maximum load of surface-treated case was about 15% higher than that of untreated case for specimens with a hole.

• 한국주조공학회지
• /
• 제36권2호
• /
• pp.67-74
• /
• 2016

The effects of scrap content on the hot tearing property and tensile property were investigated in AC2BS alloy. The hot tearing strengths were $16.4kgf/cm^2$, $15.2kgf/cm^2$, $14.9kgf/cm^2$ and $13.3kgf/cm^2$, respectively, under the constant solid fraction of 29.3% when the scrap contents of the specimens were 0%, 20%, 35% and 50%. In the same way, tensile strengths of the as-cast condition were $24.5kgf/mm^2$, $23.7kgf/mm^2$, $17.3kgf/mm^2$ and $16.0kgf/mm^2$, respectively, and the corresponding tensile strengths of the T6 heat treatment condition were $27.2kgf/mm^2$, $26.7kgf/mm^2$, $24.2kgf/mm^2$ and $23.9kgf/mm^2$. Hot tearing strength and tensile strength decreased as scrap content of the specimen increased. According to the evaluation of the quantitative hot tearing and tensile test results, the decrease of these strengths is due to the presence of oxide films which act as crack initiation site of the specimens. Therefore, elimination of oxide films of aluminum melt to maintain melt cleanliness is required.