• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.325-330
• /
• 2000

In general steel sheet pile use the containment system, vertical barrier systems for waste disposal and landfill purposes, roads in excavation which have a more permanent character or temporary structure. The sheet pile joints between section of the wall are sealed with a filter material arid the resistance to seepage is a function of the type of material employed. The aim of this paper is to review a characteristic of permeability for Z type sheet pile by field test in various condition.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.545-552
• /
• 2003

For temporary excavation support in a congested urban area, the strand of ground anchor should be removed to get permission of the private land to install anchors. But the strand doesn't need to be removed in the outside city area after use. So the anchor body, tension anchor, is fabricated in-situ. The unbonded length of This anchor has several strands, which wrap only one sheath. When the anchor body is carried into job-site or installed in the bore hole, the sheath is torn easily because it is a very week material. So the grout permeate into the torn sheath. Because of that, the load doesn't transfer to the bond length of ground anchors. It may indicate that load is being transferred along the unbonded length and thus within the potential slip surface assumed for overall stability of the anchored system. The load tests were performed on seven low-pressure grouted anchors installed in weathered soil to verify its problems. Four anchors(Type A) have the unbonded length, which consist of five strands and a week sheath and three anchors(Type B) have strands, which is covered by plastic sheath filled with grease, in the unbonded length. Both anchors are compared with load tests results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.751-756
• /
• 2001

Permanent-Form is one of system forms for reducing human labor, work costs, oscillation, noise, construction wastes and so on. Permanent-Form is made from precast method in facilities. and carried in construction site to assemble with no demolding. The biggest expense to produce Permanent-Form is about manufacturing mold. To satisfy various size of building member, the same number of manufacturing mold is needed. In this paper, studied about manufacturing mold module for acquiring economic merit and construction member safety. Permanent-Form is member stress and structural analyzed if temporary equipment were used. The result of this study is below. (1) Column sizes of Permanent-Form are 47 kinds of prototype that based on Modular coordination's basic module. 4 pieces or 6 pieces are composed basically. (2) For beam size modular coordination, standard height and width of beam are 150mm and 100mm. It brings 24 kinds of prototype. 4 pieces or 5 pieces are composed basically. (3) Structural analysis value of modular member is like this Column member shows 9.4 to 85kgf/$cm^{2}$ stress distribution and beam member shows 6.3 to 95kgf/$cm^{2}$ stress distribution. Constructing permanent form could have structural safety with use of temporary equipment

• Archives of Reconstructive Microsurgery
• /
• 제8권1호
• /
• pp.64-70
• /
• 1999

Digit that were formerly assessed as non replantable may now be replanted with the help of salvage procedure. In case that, venous repair is either marginal or technically impossible and postoperative venous congestion developed following replantation, are treated with the application of medical leeches. From July 1997 to April 1998, the authors performed arterial anastomosis and venous drainage using medical leeches in 3 children(The age of the patients ranged from 13 months to 6 years.) to have a result of aesthetic and functional success with minimizing the complications. Leech therapy has many advantages, to avoid injuring of finger tip, to decrease focal capillary coagulation, to prevent severe bleeding, and to prevent thromboembolism. The authors conclude that the use of medical leeches shows promise as a safe and effective method of providing temporary venous drainage in replanted digits.

• 기본간호학회지
• /
• 제11권3호
• /
• pp.344-352
• /
• 2004

Purpose: The purpose of this study was to identify the effect of aroma therapy on exam syndromes and temporary fatigue of senior high school students who are preparing to take college entrance exams. Method: This study was a pre-experimental research using a one-group pre-post test design and was conducted between April and July 2003 with 35 high school students. A pre-post test was used to measure long-term exam syndromes and temporary fatigue during the first period of school. Paired t-test was used. Aromas were given using an aroma electrical lamp, aroma necklet with basic oils of rosemary and lemon. According to the condition of the students, one or two oils were added: peppermint, pine, eucalyptus and Clary-Sage. Results: After two months (May, June), the result of administering aroma therapy to senior high school students showed in June there was a decrease in principal exam syndromes such as eye fatigue, headache, shoulder pain, neck stiffness, back pain, and common cold, and there was an increase Un study concentration during the two months. However, in May, there were no significant effects. The reason may have been a strong extraneous factor from midterm exams that would affect their college entrance. Conclusion: According to these results, if we use aroma oil carefully, with evidence-based applications, aroma therapy can have a positive effect on senior high school students who are preparing for the college entrance exams.

• 한국농촌건축학회논문집
• /
• 제8권2호
• /
• pp.80-93
• /
• 2006

This purpose was to explore various directions of elderly service welfare space in village community center. Data were collected 3 types that floor plans of village community centers from 24 villages, interview data of these centers use and needs from 24 aged leaders or 96 elderly. The results were as followed: 1) The floor plans of more than 50% was type IV that was composed a basic spaces(entrance, living room, two rooms, kitchen), a toilet space, a heating system space and a storage space. This type was a current basis of the rural village community centers for elderlies. 2) Elderlies used the centers at winter or out of agricultural season, and visited these to pass the time and to promote friendship among them. 3) Also they went these to take a meal together and to save down personal heating expenses. Their needs for centers were a temporary share dwelling space at winter, a maintain social relationship throughout a health, a education and a side work activity, supplying health or sports facilities, and setting up toilet space. Therefore the current centers were needed to add functions of a temporary share dwelling, a energy saving heat system and a social promoting relationship, and so these could be represented to a elderly welfare service center in rural villages.

• Journal of Information Processing Systems
• /
• 제16권3호
• /
• pp.588-598
• /
• 2020

An alternative state estimation filtering algorithm is designed for continuous time systems with noises as well as control input. Two kinds of estimation filters, which have different measurement memory structures, are operated selectively in order to use both filters effectively as needed. Firstly, the estimation filter with infinite memory structure is operated for a certain continuous time system. Secondly, the estimation filter with finite memory structure is operated for temporarily uncertain continuous time system. That is, depending on the presence of uncertainty, one of infinite memory structure and finite memory structure filtered estimates is operated selectively to obtain the valid estimate. A couple of test variables and declaration rule are developed to detect uncertainty presence or uncertainty absence, to operate the suitable one from two kinds of filtered estimates, and to obtain ultimately the valid filtered estimate. Through computer simulations for a continuous time aircraft engine system with different measurement memory lengths and temporary model uncertainties, the proposed state estimation filtering algorithm can work well in temporarily uncertain as well as certain continuous time systems. Moreover, the proposed state estimation filtering algorithm shows remarkable superiority to the infinite memory structure filtering when temporary uncertainties occur in succession.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.107-108
• /
• 2007

Overhead transmission lines are completely exposed to the environment. This causes faults in transmission lines due to natural environmental conditions. In some cases, transmission towers are damaged by typhoons and snow, as well as sleet on the transmission lines. It takes a lot of time to repair the damaged towers. For emergency restoration purposes, steel poles are installed to temporarily supply power. Before 2003, emergency restoration steel poles were made of angled steel, which required a large number of beams, bolts, etc. In addition, the foundation of the steel pole and ground wire was constructed using excavation and burial methods, therefore it required a lot of manpower and time to construct temporary transmission lines. In September 2003, typhoon Maemi, whose maximum wind speed was 60m/s, hit Korea. 'Maemi' destroyed transmission lines in the Busan and Geojea area, causing long blackouts. To reduce the recovery time to the damaged transmission lines, self-build based emergency towers were developed. self-build based emergency towers reduced recovery time from 24 hours to 4 hours or less. However, the self-build based emergency tower had no arms, so the temporary transmission lines could only be constructed without curves in line routes. In this paper, solving these self-build based emergency tower limitations, using insulated arms(designed for use with the self-build based emergency tower), shall be explained.

• Journal of Chest Surgery
• /
• 제57권3호
• /
• pp.312-314
• /
• 2024

A 3-year-old boy with Glenn physiology exhibited refractory heart failure with reduced ejection fraction. To improve the patient's oxygen saturation, he underwent ventricular assist device (VAD) implantation with concomitant Fontan completion. The extracardiac conduit Fontan operation was performed with a 4-mm fenestration. For VAD implantation, Berlin Heart cannulas were positioned at the left ventricular apex and the neo-aorta. Following weaning from cardiopulmonary bypass, a temporary continuous-flow VAD, equipped with an oxygenator, was utilized for support. After a stabilization period of 1 week, the continuous-flow VAD was replaced with a durable pulsatile-flow device. Following 3 months of support, the patient underwent transplantation without complications. The completion of the Fontan procedure at the time of VAD implantation, along with the use of a temporary continuous-flow device with an oxygenator, may aid in stabilizing postoperative hemodynamics. This approach could contribute to a safe transition to a durable pulsatile VAD in patients with Glenn physiology.

• 한국건축시공학회지
• /
• 제14권5호
• /
• pp.407-413
• /
• 2014

고층건축공사의 양중장비의 선정은 프로젝트 성공의 중요한 요소 중의 하나이다. 건설현장에서는 전문가나 경험이 많은 공사관리자가 2차원 도면 위에 타워크레인의 회전반경을 고려하여 위치를 이동시키는 방법을 통해 적절한 위치를 결정한다. CAD와 BIM, 가상현실 등이 건축설계와 시공단계에 많이 활용되고 있지만 가설계획이나 타워크레인을 선정하기 위해서는 사용되지 않고 있다. 이 연구는 적절한 타워크레인의 위치를 선정하기 위해 증강현실 기술을 이용하는 방법을 제안하고 있다. Vuforia와 Unity 3d를 이용하여 타워크레인의 위치를 선정할 수 있는 증강현실 프로토타입을 구현하였으며 실제 건축도면을 통해 활용성을 검증하였다.