• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.3
• /
• pp.165-176
• /
• 2018

To solve the inconsistencies between realistic boundaries and the cadastral record boundaries, the cadastral resurvey project has been funded by a large budget since 2012 and executed over a long period of time until 2030. However, if the causes of inconsistencies are not analyzed and addressed, these inconsistencies could possibly reoccur. Even though the causes of inconsistencies can be defined in several aspects, including regulations, surveying methods, and management of cadastre maps or survey results, and so on, this study focuses on analyzing the inconsistency problems in the management of cadastre maps or survey results. In order to resolve the problems in inconsistencies between the cadastre maps and survey results, the study proposes to develop the cadastre data model based on LADM (Land Administration Domain Model) to manage the cadastre maps and survey results in better ways. In order to proposed the Cadastre Data Model, we analyzed the cadastre management system implemented in Korea and identified requirements to resolve the problems in inconsistencies, which are considered in the proposed data model as follows: 1) cadastral management system based on individual parcels, 2) synthesis of a realistic boundary and cadastral record boundary, 3) management of official and sharing reference data, 4) consistent management of survey results and parcel boundaries, 5) temporal managements of parcel boundaries. In the end, this study proposes a cadastral data model based on the LADM to integrate and manage the cadastral surveying results of the new cadastral management system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.124-135
• /
• 2007

The purpose of this study is to analyze the hydraulic behavior in a stream reach using SMS RMA-2 model with a series of dynamic boundary conditions of main stream and lateral flows simulated by WMS HEC-1 program. For the stream reach (10.5 km) between Gongdo and Pyeongtaek water level gauge stations of Anseongcheon, the model simulated two dimensional flow characteristics by applying dynamic flow conditions of rainfall frequencies of 50, 100, 500, and 1,000 years for the main stream and three tributaries. The temporal flow behavior successfully simulated and the results showed that the distribution of mean velocity and water level within the stream reach increased according to the increase of flow frequency. Especially, the flow velocity sensibly increased at the near downstream of lateral inflow as the width of main stream is narrower.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.5
• /
• pp.373-380
• /
• 2014

Film flows applied to shell-and-tube heat exchangers in various industrial fields have been studied for a long time. One boundary of the film flow interfaces with a fixed wall, and the other boundary interfaces with a gaseous region. Thus, the flows become so unstable that wavy behaviors are generated on free surfaces as the film Reynolds number increases. First, high-amplitude solitary waves are detected in a low Reynolds number laminar region; then, the waves transit to a low-amplitude, high frequency ripple in a turbulent region. Film thickness is the most significant factor governing heat transfer. Since the wave accompanied in the film flow results in temporal and spatial variations in film thickness, it can be of importance for numerically predicting the film's wavy behavior. In this study, various turbulent models are applied for predicting low-amplitude ripple flows in turbulent regions. The results are compared with existing experimental results, and finally, the applied turbulent models are appraised in from the viewpoint of wavy behaviors.

• Journal of Korea Multimedia Society
• /
• v.3 no.4
• /
• pp.356-364
• /
• 2000

Block based fast motion estimation algorithm use the fixed search pattern to reduce the search point, and are based on the assumption that the error in the mean absolute error space monotonically decreases to the global minimum. Therefore, in case of many local minima in a search region we are likely to find local minima instead of the global minimum and highly rely on the initial search points. This situation is evident in the motion boundary. In this paper we define the candidate regions within the search region using the motion information of the neighbor blocks and we propose the multiple local search method (MLSM) which search for the solution throughout the candidate regions to reduce the possibilities of isolation to the local minima. In the MLSM we mark the candidate region in the search point map and we avoid to search the candidate regions already visited to reduce the calculation. In the simulation results the proposed method shows more excellent results than that of other gradient based method especially in the search of motion boundary. Especially, in PSNR the proposed method obtains similar estimate accuracy with the significant reduction of search points to that of full search.

• Korean Journal of Environment and Ecology
• /
• v.25 no.3
• /
• pp.412-420
• /
• 2011

This study was conducted to quantitatively analyze the temporal change of green space network at multi-scales from 1975 to 2006 with the application of graph theory in Seoul, Korea. Remarkable change of connectivity was detected in green space networks at the scale ranging from 1,000 ~ 1,600 m during 30 years. Green spaces and their networks have been restoring after 1990 since forest areas had been fragmented in 1975. In 2006, we identified the important core habitat areas that can sustain diverse wildlife species and stepping stones composed of small patches that can link these core habitat areas. Green spaces showed high correlation with the relative importance value of green space connectivity. So, this study could graphically represent green space networks of Seoul City. Green spaces of core areas distributed at the northern and southern boundary, and those of stepping stones possessing the high value of betweenness centrality consisted at the middle, eastern and western boundary. These results indicate that green space network can be graphically and quantitatively explained by degree centrality, betweenness centrality and relative importance value of connectivity with the application of graph theory.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.15-23
• /
• 2017

The WGS conversion project of cadastral drawing (promoted by the Ministry of Land) is not able to reflect the cadastral registration due to subtle differences such as area and location. When converting the digital cadastral region to the world geodetic system, the boundary point coordinates must be changed to the legal coordinate units. However, there is a phenomenon that occurs in which the minute area changes do not coincide with the area registered in the cadastral registration when the coordinate unit is changed. In this study, we have developed a method to adjust many parcels collectively by applying a passive fine-tuning method used in cadastral resurvey project to solve these problems. Total 1, total 2+1, interval 1, interval 2+1, etc. were classified based on the number of parcels that need to be considered for the range of adjustment and the area condition. The analysis of the experimental area (after developing SW for comparison of each method) showed that the total 2+1 method is suitable for the location accuracy and the interval 2+1 method is suitable for the temporal efficiency.

• Korean Journal of Remote Sensing
• /
• v.11 no.3
• /
• pp.71-81
• /
• 1995

The purpose of this research were to find ways to detect ecotone between the Mt. Pukhansan National Park and adjacent urban residential areas, to measure the width and size of ecotone around the park, and to investigate temporal change of ecotone around the Park. Normalized Difference Vegetation Index(NDVI) derived from TM data (May of 1985, 1987, and 1993) and the analytical capabilities of GIS were used to investigate the impacts of human activities inside of and outside of the boundary of the park. Major findings of the study can be summarized as follows: First, ecotone around the boundary of the national park could be identified from NDVI-distance curves derived by a series of buffering operations with a GIS. Second, average width of ecotone around the park was nealy doubled during 1985-1993 period. Third, NDVI vaules of the park were about 14 percent higher than those of surrounding areas. Finally, it seems that the expansion of the ecotone of the park is related to heavy trampling of visitors and various types of environmental pollution of the adjacent urban areas.

• Steel and Composite Structures
• /
• v.10 no.2
• /
• pp.129-149
• /
• 2010

The objective of this study is to formulate a general 3D material-structural analysis framework for the thermomechanical behavior of steel-concrete structures in a fire environment. The proposed analysis framework consists of three sequential modeling parts: fire dynamics simulation, heat transfer analysis, and a thermomechanical stress analysis of the structure. The first modeling part consists of applying the NIST (National Institute of Standards and Technology) Fire Dynamics Simulator (FDS) where coupled CFD (Computational Fluid Dynamics) with thermodynamics are combined to realistically model the fire progression within the steel-concrete structure. The goal is to generate the spatial-temporal (ST) solution variables (temperature, heat flux) on the surfaces of the structure. The FDS-ST solutions are generated in a discrete form. Continuous FDS-ST approximations are then developed to represent the temperature or heat-flux at any given time or point within the structure. An extensive numerical study is carried out to examine the best ST approximation functions that strike a balance between accuracy and simplicity. The second modeling part consists of a finite-element (FE) transient heat analysis of the structure using the continuous FDS-ST surface variables as prescribed thermal boundary conditions. The third modeling part is a thermomechanical FE structural analysis using both nonlinear material and geometry. The temperature history from the second modeling part is used at all nodal points. The ABAQUS (2003) FE code is used with external user subroutines for the second and third simulation parts in order to describe the specific heat temperature nonlinear dependency that drastically affects the transient thermal solution especially for concrete materials. User subroutines are also developed to apply the continuous FDS-ST surface nodal boundary conditions in the transient heat FE analysis. The proposed modeling framework is applied to predict the temperature and deflection of the well-documented third Cardington fire test.

• Journal of Astronomy and Space Sciences
• /
• v.38 no.4
• /
• pp.203-215
• /
• 2021

The auroral observation has been started at Jang Bogo Station (JBS), Antarctica by using a visible All-sky camera (v-ASC) in 2018 to routinely monitor the aurora in association with the simultaneous observations of the ionosphere, thermosphere and magnetosphere at the station. In this article, the auroral observations are introduced with the analysis procedure to recognize the aurora from the v-ASC image data and to compute the auroral occurrences and the initial results on their spatial and temporal distributions are presented. The auroral occurrences are mostly confined to the northern horizon in the evening sector and extend to the zenith from the northwest to cover almost the entire sky disk over JBS at around 08 MLT (magnetic local time; 03 LT) and then retract to the northeast in the morning sector. At near the magnetic local noon, the occurrences are horizontally distributed in the northern sky disk, which shows the auroral occurrences in the cusp region. The results of the auroral occurrences indicate that JBS is located most of the time in the polar cap near the poleward boundary of the auroral oval in the nightside and approaches closer to the oval in the morning sector. At around 08 MLT (03 LT), JBS is located within the auroral oval and then moves away from it, finally being located in the cusp region at the magnetic local noon, which indicates that the location of JBS turns out to be ideal to investigate the variabilities of the poleward boundary of the auroral oval from long-term observations of the auroral occurrences. The future plan for the ground auroral observations near JBS is presented.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.3
• /
• pp.197-203
• /
• 2022

Urban space expansion is an important symbol of the urbanization process and has always been an important topic in urban studies. In addition, for sustainable city management, it is important to identify factors that can influence, such as the driving force and direction of urban space expansion, from the stage of establishing an urban development plan. To understand these factors, by observing the expansion process of a specific city, it is possible to sufficiently observe how the urban spatial dimension changes. Through a series of processes, the spatial growth characteristics of the city are analyzed, and the influence and results of important factors are analyzed. For this purpose, this paper examines the changes in the city's outer boundary and land use structure through monitoring data on urban areas of 14 cities in Hunan Province, China from 2000 to 2016. Temporal and spatial regularity according to the urban space expansion of these cities were analyzed, and a preliminary assessment was made on whether the urban space expansion is coordinated with the urban population growth. The assessment result showed: (1) The urban space of most cities has been extended rapidly in 2000-2015 however, the rate and the intensity of urban space expanding has been declining. (2) The construction of the industrial park is the core driving force of the urban space expanding, and the change of the urban space structure is manifested as enclave city expansion because that the industrial park is usually far away from the city center. (3) The population agglomeration is another driving force of the urban space expanding. At this time, the urban space expanding is like boundary extension. (4) Except Changsha city, all of the cities has a high urbanization-area-growth elastic coefficient. It means that most of the cities should enhance the land use degree.