• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.112-112
• /
• 2009

Temperature dependence of the ferroelectric properties of poly(vinylidefluoride-trifluoroethylene) copolymer thin films are studied with various insulators such as $SrTa_2O_6$ and $La_2O_3$. Thin films of poly(vinylidene fluoridetrifluoroethylene) 75/25 copolymer were prepared by chemical solution deposition on p-Si substrate. Capacitance-voltage (C-V) and current density (J-V) behavior of the Au/P(VDF-TrFE)/Insulator/p-Si structures were studied at ($150-200\;^{\circ}C$) and dielectric constant of the each insulators were measured to be about 15 at $850\;^{\circ}C$ for 10 minutes. Memory window width at 5 V bias the MFIS(metal-ferroelectric-insulator-semiconductor) structure with as deposited films was about 0.5 V at high temperature ($200\;^{\circ}C$). And the memory window width increased as voltage increased from 1 V to 5 V.

• 대한전자공학회논문지TE
• /
• 제39권2호
• /
• pp.110-117
• /
• 2002

오늘날 제어시스템들은 자동화가 요구되는 분야가 날로 광범위해지고 기능도 전문화됨에 따라서 제어 시스템 통합을 단순화할 수 있는 개방형 시스템이 등장하고 있다. 본 연구에서는 제어시스템의 개방화, 즉 HMI, 제어기, 그리고 제어 통신망의 이더넷 도입 경향에 따라 HMI는 제어용 언어 SFC와 Visual C++, OS는 소프트 실시간을 보증하고 네트워킹에서 가장 안정적인 Window NT, 제어기는 펜티엄 PC, 통신망은 산업용 이더넷을 이용한 개방형 제어시스템(OCS)을 설계하고 구현한다. OCS는 FA과 PA에서 많이 이용되고 있는 레벨제어 시스템과 온도제어 시스템으로 구성되며, 제안된 제어구조의 유효성을 나타내기 위하여 제어알고리즘과 실험적 결과를 제시한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권2호
• /
• pp.1-6
• /
• 2009

We report a successful fabrication of $high-J_c\;NdBa_2Cu_3O_{7-{\delta}}$ (NdBCO) films on $SrTiO_3$(STO) (100) substrates by pulsed laser deposition (PLD) in a relatively wide processing window. Under various oxygen pressures controlled by either 1%$O_2$/Ar mixture gas or pure $O_2$ gas, strongly c-axis oriented NdBCO films were grown at the substrate temperature $(T_s)\;of\;800^{\circ}C$ in 800 mTorr with 1%$O_2$/Ar gas and also in 400 and 800 mTorr with pure $O_2$ gas. These samples exhibited $T_c$ values over 90K and $J_c$ values of $2.8-3.5MA/cm^2$ at 77K in self-field (77K, sf). On the other hand, $J_c$ values over $1A/cm^2$ were obtained at the temperature regions of $700-830^{\circ}C$ in 800 mTorr with 1%$O_2$/Ar gas at those of $750-830^{\circ}C$ in 800 mTorr with pure $O_2$ gas. Unlike previous reports, resent results support that the PLD processing window for high-Jc NdBCO films is not narrow.

• 대한원격탐사학회지
• /
• 제24권4호
• /
• pp.309-324
• /
• 2008

Terra/Aqua MODIS의 적외관측 자료를 이용하여 동아시아 지역에서 물리적 방법과 split-window 방법으로 총가강수량을 산출하는 알고리즘을 개발하였다. 물리적 방법에서는 동아시아 지역에 대한 분석 예측 자료를 생산하는 RDAPS 자료를 알고리즘의 초기 추정치로 사용하였다. 이 과정에서 복사전달계산을 위해 빠르고 정확도가 높은 RTTOV-7 모델을 이용하였다. Split-window를 이용한 총가강수량 산출에서는 동아시아 지역의 라디오존데 관측자료를 훈련자료로 사용하여 밝기온도를 계산하였고, 이로부터 관측된 밝기온도로부터 총가강수량을 산출할 수 있는 회귀식을 도출하였다. 위의 두 알고리즘을 2004년 8월과 12월의 MODIS 적외 자료에 적용하여 산출한 결과를 해양에서는 DMSP SSM/I 결과와 육지에서는 라디오존데 관측 결과와 비교하여 검증하였고, 이를 바탕으로 총가강수량의 정확성에 영향을 미치는 요인과 산출과정에 중요한 물리과정을 분석하였다. 비교결과 RDAPS, MODIS, split-window 방법에 비해 물리적 방법을 이용한 총가강수량의 산출 정확성이 높은 것으로 나타났다. 그러나 물리적 방법은 초기 추정치에 따라 산출결과가 상이하게 나타나는 단점을 가지고 있는 것으로 파악되었다. 따라서 TIGR 자료와 같은 기후 평균값을 초기치로 적용함에 있어 주의가 요구된다. 이러한 원인으로 지표 부근의 수증기에 대한 정보 부족 등을 들 수 있다. 이러한 단점에도 불구하고 지표와 지형의 변화가 큰 한반도를 포함한 동아시아 지역에서는 물리적 방법에 의한 총가강수량 산출의 효율성이 큰 것으로 사료된다.

• 한국태양에너지학회 논문집
• /
• 제27권4호
• /
• pp.67-75
• /
• 2007

This study intends to the adequacy inspection of the room temperature variation rate that is available in the building heat performance evaluation index, so we performed the sensitivity analysis about the room temperature variation rate and the energy consumption in the room. For these purpose, we supposed the models which are composed of the various window area, insulation thickness and ventilation rate. Then we analyzed the simulation using the ESP-r and Seoul weather data. In this research, the pattern of the increasing & decreasing rate of annual load according to the change of the various design factors is similar to the pattern of increasing & decreasing rate of not the K-values but the room temperature variation rate. Also we derive the optimum value of the various design factors and the room temperature variation rate in this analysis model. Further study is to be required the development of convenient tool to use in the real design.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2254-2255
• /
• 2008

Thermoforming is one of the most versatile and economical process to produce polymer products. The drawback of thermoforming is difficult to control thickness of final products. Temperature distribution affects the thickness distribution of final products, but temperature difference between surface and center of sheet is difficult to decrease because of low thermal conductivity of ABS material. In order to decrease temperature difference between surface and center, heating profile must be expressed as exponential function form. In this study, Finite Difference Method was used to find out the coefficients of optimal heating profiles. Through investigation, the optimal results using Finite Difference Method show that temperature difference between surface and center of sheet can be remarkably minimized with satisfying Temperature of Forming Window.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.770-777
• /
• 2016

It has been a challenge for researchers to accurately measure high temperature creep strain online without damaging the mechanical properties of the pipe surface. To this end, a noncontact method for measuring high temperature strain of a main steam pipe based on digital image correlation was proposed, and a system for monitoring of high temperature strain was designed and developed. Wavelet thresholding was used for denoising measurement data. The sub-pixel displacement search algorithm with curved surface fitting was improved to increase measurement accuracy. A field test was carried out to investigate the designed monitoring system of high temperature strain. The measuring error was less than $0.4ppm/^{\circ}C$, which meets actual measurement requirements for engineering. Our findings provide a new way to monitor creep damage of the main steam pipe of a boiler of an ultra-supercritical power plant in service.

• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.130-137
• /
• 1996

In the present paper the effect of various process conditions on the final weight of injection molded rectangular plates has been investigated in detail. The main parameters involved in the simulations were melt temperature, mold temperature, injection speed and packing pressure. The dimensions of the plate used were 100mm long, 2mm of width and polystyrene was used as a molding material. The shear viscosity of the polymeric material was treated as a function of shear rate, temperature and pressure through the whole processes including packing and cooling stages. By increasing a packing pressure the final weight of sample increased linearly. Furthermore, as the melt temperature, the mold temperature and the injection speed increased, the final weight of the injection molded plate decreased within the molding window.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.293-296
• /
• 2008

Land surface Temperature (LST) is a very useful surface parameter for the wide range of applications, such as agriculture, numerical and climate modelling community. Whereas operational observation of LST is far from the needs of application community in the spatial Itemporal resolution and accuracy. So, we developed split-window type LST retrieval algorithm to estimate the LST from MTSAT-IR data. The coefficients of split-window algorithm were obtained by means of a statistical regression analysis from the radiative transfer simulations using MODTRAN 4 for wide range of atmospheric profiles, satellite zenith angle and lapse rate conditions including the surface inversions. The sensitivity analysis showed that the LST algorithm reproduces the LST with a reasonable quality. However, the LST algorithm overestimates and underestimates for the strong surface inversion and superadiabatic conditions especially for the warm temperature, respectively. And the performance of LST algorithms is superior when satellite zenith angle is small. The accuracy of the retrieved LST has been evaluated with the Moderate Resolution Imaging Spectroradiometer (MODIS) LST data. The validation results showed that the correlation coefficients and RMSE are about 0.83${\sim}$0.98 and 1.38${\sim}$4.06, respectively. And the quality of LST is significantly better during night and winter time than during day and summer. The validation results showed that the LST retrieval algorithm could be used for the operational retrieval of LST from MTSAT-IR and COMS(Communication, Ocean and Meteorological Satellite) data with some modifications.

• 한국재료학회지
• /
• 제23권4호
• /
• pp.215-218
• /
• 2013

Vanadium dioxide ($VO_2$) is an attractive material for smart window applications where the transmittance of light can be automatically modulated from a transparent state to an opaque state at the critical temperature of ${\sim}68^{\circ}C$. Meanwhile, F : $SnO_2$ (F-doped $SnO_2$, FTO) glass is a transparent conductive oxide material that is widely used in solar-energy-related applications because of its excellent optical and electrical properties. Relatively high transmittance and low emissivity have been obtained for FTO-coated glasses. Tunable transmittance corresponding to ambient temperature and low emissivity can be expected from $VO_2$ films deposited onto FTO glasses. In this study, FTO glasses were applied for the deposition of $VO_2$ thin films by pulsed DC magnetron sputtering. $VO_2$ thin films were also deposited on a Pyrex substrate for comparison. To decrease the phase transition temperature of $VO_2$, tungsten-doped $VO_2$ films were also deposited onto FTO glasses. The visible transmittance of $VO_2$/FTO was higher than that of $VO_2$/pyrex due to the increased crystallinity of the $VO_2$ thin film deposited on FTO and decreased interface reflection. Although the solar transmittance modulation of $VO_2$/FTO was lower than that of $VO_2$/pyrex, room temperature solar transmittance of $VO_2$/FTO was lower than that of $VO_2$/pyrex, which is advantageous for reflecting solar heat energy in summer.