• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1086-1087
• /
• 2009

A small temperature sensor is designed in a 0.35um CMOS process. Transistors operating in the intermediate inversion region are employed in the core of the sensor. This temperature sensor operates in $-50^{\circ}C{\sim}120^{\circ}C$ with ${\pm}2^{\circ}C$ of accuracy after two-point calibration. This temperature sensor can be placed in the active pixel area of a display panel to measure the temperature of the display panel for temperature compensation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.6
• /
• pp.1228-1236
• /
• 2001

In this study, CT specimens were prepared from ASTH A5l6 steel which was used for pressure vessel plates for moderate and lower temperature service. And we got the fellowing characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$ , $-30^{\circ}C$, $-60^{\circ}C$, $-80^{\circ}C$, $-100^{\circ}C$ and $-120^{\circ}C$ and in the range of stress ratio of 0.1, 0.3 by means of opening mode displacement. At the constant stress ratio, the Threshold stress intensity factor range ΔAKth in the early stage of fatigue crack growth (Region I) and stress intensity factor range $\DeltaK$ in the stable of fatigue crack growth (Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN-$\Delta$K in Region II that is, the fatigue clack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.3
• /
• pp.78-83
• /
• 2000

In this study, CT specimens were prepared from AST SA516 Gr. 70 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at 25$^{\circ}C $, -60$^{\circ}C $, -80$^{\circ}C $ and -100$^{\circ}C $ and in the range of stress ratio of 0.05, 0.3 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ${\delta} K_{th}$ in the early stage of fatigue crack growth (Region I) and stress intensity factor range $\delta $K in the stable of fatigue crack growth (Region II) were increased in proportion to descending temperature. It was assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN -$\delta $K in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It was assumed that the fatigue crack growth rate da/dN is rapid in proportion to descending temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• Proceedings of the KWS Conference
• /
• 2001.05a
• /
• pp.220-223
• /
• 2001

In this study, CT specimens were prepared hem ASTM SA516 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, -l$0^{\circ}C$ and -l2$0^{\circ}C$ and in the range of stress ratio of 0.1, 0.3 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ΔK$_{th}$ in the early stage of fatigue crack growth ( Region I ) and stress intensity factor range ΔK in the stable of fatigue crack growth ( Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN - ΔK in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region H and the cryogenic-brittleness greatly affect a material with decreasing temperature.e.greatly affect a material with decreasing temperature.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.326-331
• /
• 2001

In this study. CT specimens were prepared from ASME SA5l6 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, -10$0^{\circ}C$ and -12$0^{\circ}C$ in the range of stress ratio of 0.1 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ΔKsub/th/ in the early stage of fatigue crack growth ( Region I) and stress intensity factor range ΔK in the stable of fatigue crack growth ( Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da.dN -ΔK in RegionII, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region II and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.281-286
• /
• 2006

In this study, acquired time series Landsat TM/ETM+ image to extract land surface temperature for wide-area region and executed geometric correction and radiometric correction. And extracted land surface temperature using NASA Model, and I achieved the first correction by perform land coverage category for study region and applies characteristic emission rate. Land surface temperature that acquire by the first correction analyzed correlation with Meteorological Administration's temperature data by regression analysis, and established correction formula. And I wished to improve accuracy of land surface temperature extraction using satellite image by second correcting deviations between two datas using establishing correction formula. As a result, land surface temperature that acquire by 1,2th correction could correct in mean deviation of about ${\pm}3.0^{\circ}C$ with Meteorological Administration data. Also, could acquire land surface temperature about study region by relative high accuracy by applying to other Landsat image for re-verification of study result.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.927-929
• /
• 2003

Using received northeast region in China of Terra/MODIS data at Tokyo University of information Sciences. Make monthly division Land Surface Temperature maximum composite image. Using monthly division Land Surface Temperature maximum composite image, considered characteristic of monthly variation of Land surface temperature and relation with land covering and NDVI at the northeast region in China.

• Journal of Korean Physical Therapy Science
• /
• v.2 no.3
• /
• pp.577-586
• /
• 1995

This paper was the study of a change in the body temperature of each region(Oral cavity, Axillary, Cubital, Popliteal, Inguinal region)and by time after appling hot(Hot Pack, Infra Red) and cold (Ice Pack, Cooling Pack) to lumbar region. The statistical measures were sampled through 16 senior students in dept. of Physiothrapy, Kim Cheun College and the period for this was from July 13, 1995 to July 20, 1995. There was an increse in the temperature of distal portion besides application area after hot application. The increse in the body temperature according to applied agents and time showed significance statistically(p<0.01, p<0.05). There was just a decrease in the temperature of distal portions besides application area after appling Ice Pack. Furthermore there was an increase in the body temperature after appling Cooling Towel. Therefore, during cold application the appling agents and time did not showed any significance statistically.

• Korean Journal of Acupuncture
• /
• v.22 no.3
• /
• pp.53-61
• /
• 2005

Objectives : This study was designed to investigate the effect of thermal change on face, acupuncturing Yon-gok (KI2). The room temperature adjust $26^{\circ}C$ making use of air-conditioner. Methods : A Clinical study was done on 20 males and females who didn't have any disease. We used IR-5000 to observe the effects of acupuncture at face temperature. Results : Acupuncturing Yon-gok(KI2), the special region on face falls the temperature (n=20) from Avg.=$28.1400{\pm}0.2603^{\circ}C$ to Avg.=$27.4910{\pm}0.2539^{\circ}C$ the special region on chest falls the temperature (n=20) from Avg.=$26.9450{\pm}0.2591^{\circ}C$ to Avg.=$26.8690{\pm}0.2519^{\circ}C$ These effects result at the stimulating 'Hwa' point, one of five-shu-point one in the meridian, Yon-gok (KI2) is one of 'Hwa'. the stimulating 'Hwa' is able to cure fever, headache, and pains. and it has ablility of controlling body temperature, specially, upper region of whole human body. Conclusions : In conclusion. Acupuncturing Yon-gok (KI2) falls the temperature of region on face, Compared with the temperature of region on chest.

• Journal of the Korean association of regional geographers
• /
• v.12 no.4
• /
• pp.461-474
• /
• 2006

This paper aims to analyze regional characteristics of unusual temperature events on summer and winter. The major data used in this study are the daily mean temperature of summer (June-August) and winter (December-February) and wind field on 850 hPa height. Regions of unusual temperature are divided into five regions by the monthly frequency of unusual temperature occurrence. The divided regions are following as: the middle east coastal region (I) where the summer unusual high temperature occurrence frequency is highest; the Gyunggi west coastal and northern middle inland region (II) where winter unusual low temperature occurrence frequency is highest and winter unusual high temperature occurrence frequency is low; the western middle and south region (III) where unusual temperature occurrence ratio is not concentrated on specific season; the forest and southern east region (IV) where unusual high temperature is low; and the south coastal and Jeju island region (V) where winter unusual high temperature is highest.