• 한국태양에너지학회 논문집
• /
• 제28권5호
• /
• pp.14-20
• /
• 2008

As the number of buildings that use the transparent permeation materials as the outer wall is on the increase, the coming amount of the light rays is a lot, and thus the increase in the cooling load and the radiant heat of high temperature may cause the residents to discomfort. In order to reduce such influences, this paper analyzed the installation effects of the sunshade BIPV. The inner temperature of the room installed the sunshade BIPV or otherwise was measured, and compared and analyzed the effects of reducing the cooling load by the incoming light rays. The sample space of the third floor of S university installed the sunshade BIPV has two rooms on the same conditions, and for five sunny days selected in August, the researcher measured the air temperature and the temperature of the fittings with closing the windows to minimize the movement of air without operating the coolers. The maximum cooling load measured by the incoming light rays in the room where the sunshade BIPV was not installed was examined as 459.13kcal/h. It can be understood as the effect of reducing the cooling load according to the incoming rays of the room with sunshade BIPV. Even though the effect of cooling load reduction is not so great in a room, the total reduction in cooling room for the 32 rooms installed the sunshade BIPV was estimated to be 40442.27kcal/day, which will be able to bring the maximum reduction effect of 17.1kW in energy and reduce the investment cost owing to the reduction in cooling load when initially designing the building.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.113-114
• /
• 2014

Though polymer cement mortar is widely used to repair or reinforce concrete as it has superior adhesion, dense internal structure, chemical resistance, and workability in comparison to those of general cement mortar, studies on its behaviors in high temperature environment such as fire is urgently required. Accordingly, in this experiment, the degrees of reduction in the compressive strength at different temperatures was grasped applying ISO834 Heating Curve, and the effect of polymer content and type on compressive strength could be determined. As a result of this experiment, it is found that polymer type and content have a big effect on reduction of compressive strength in high temperature range, and not only the dynamic characteristics but also the combustion characteristics in high temperature range are required to be studied considering occurrence of a fire in the future.

• 대한간호학회지
• /
• 제2권1호
• /
• pp.237-246
• /
• 1971

The purpose of this study is to observe the effects of ice-pack application on different body areas and to note which body area produces the best results according to age, room temperature, sex and disease. Seventeen patients, including six men and eleven women, hospitalized at Seoul National University Hospital from May 22 to August 29, 1971, ranging in age from 15 through 60 years with an oral temperature of 38℃ or over, were chosen for this study. They were observed with regard to the effect of the ice-packs after applications for 30, 45 or 60 minutes. Four ice-packs, 7.6inch by 9 inch, were applied on the chest and the abdominal surface in the control group and the same size and number of packs on the axillae and political regions in the experimental group. The study results were reviewed in a statistical method to obtain the following findings 1. There was no significant difference in the change of the body temperature between the control group and the experimental group after applying the packs for 30, 45 or 60 minutes. 2. Individually, there was a significant difference in the change of body temperature between before and after application for 30, 45 or 60 minutes. 3. The difference of room temperature also had no merle influence on the body temperature taken immediately before applying the ice-packs. Even when ice-packs were applied for 30, 45 or 60 minutes, the room temperature did not influence the reduction of temperature in the patient. 4. There was a significant difference in the change of the body temperature, according to the sex, after application for 30, 45 or 60 minutes. Male patient's body temperature decreased far more noticeably than the female patients and the degree of reduction became more pronounced the longer the packs were applied. 5. In regard to age, in adults, the degree of reduction in the body temperature by the application of ice-packs was similar after appling them for 30, 45 or 60 minutes and did not depend upon the length of application. 6. Regardless of the disease, there was no great difference in the reduction of body temperature when the ice-packs were applied for 30 or 45 minutes, except for patients with typhoid fever when a striking decrease in the fever resulted after a 60 minute application of the ice-pack.

• 지질공학
• /
• 제3권2호
• /
• pp.191-201
• /
• 1993

환원은 심층 지하처분되는 Cr(VI)의 양을 줄이는데 중요한 수단의 하나이다. 이 반응은 pH와 온도에 따라 민감하게 작용하며, 지하심층 처분장의 낮은 pH와 높은 온도는 토양 유기질, 높은 염소이온 농도와 더불어 Cr(VI)의 환원에 좋은 환경을 제공한다. 본 연구에서는 다양한 환경 조건에 따른 토양 유기질과 염소이온에 의한 Cr(VI)의 환원이 조사 되었다. aquifer와 aquitard 샘플은 각각 미국 루이지애나주 세인트 촬스군의 심층 처분장에서 채취되었다. 본 연구에서는 심층처분장을 대표하는 pH(-0.81~2.0), 온도($50^{\circ}C와{\;}70^{\circ}C$), 염소이온 농도(0, 0.26, 0.52 몰)를 이용하였다.

• Environmental Engineering Research
• /
• 제10권5호
• /
• pp.239-246
• /
• 2005

The effect of Pt addition over $V_2O_5-WO_3/TiO_2$ catalyst supported on PRO-66 was investigated for NO reduction in order to develop the catalytic filter working at low temperature. Catalytic filters, $Pt-V_2O_5-WO_3/TiO_2/PRD$, were prepared by co-impregnation of Pt, V, and W precursors on $TiO_2$-coated ceramic filter named PRD (PRD-66). Titania was coated onto the pore surface of the ceramic filter using a vacuum aided-dip coating method. The Pt-loaded catalytic filter shifted the optimum working temperature from $260-320^{\circ}C$(for the catalytic filter without Pt addition) to $190-240^{\circ}C$, reducing 700 ppm NO to achieve the $N_x$ slip concentration($N_x\;=\;NO+N_2O+NO_2+NH_3$) less than 20 ppm at the face velocity of 2 cm/s. $Pt-V_2O_5-WO_3/TiO_2$ supported on PRD showed the similar catalytic activity for NO reduction with that supported on SiC filter as reported in a previous study, which implies the ceramic filter itself has no considerable interaction for the catalytic activity.

• 설비공학논문집
• /
• 제22권6호
• /
• pp.398-403
• /
• 2010

The drag reduction(DR) of non-ionic surfactant and polymer according to the variation of fluid velocity, temperature and surfactant concentration was investigated experimentally. For this experiment, the kind of surfactant was non ionic amine-oxide and the kinds of polymer were polyacrylamide and xantan gum. An experimental apparatus equipped with one water storage tanks was built and two flow meters, two pressure gauges for data logging system was installed. Results showed that the kinds of polymer, polyacrylamide and xantan gum, had DR of below 20% for below 500 ppm in fluid temperature of $50{\sim}80^{\circ}C$. But the kind of surfactant, amine oxide, had DR of above 40% for 500~1000 ppm in fluid temperature of $50{\sim}80^{\circ}C$. As a result, amin oxide showed better materials to use to the district heating system.

• 한국세라믹학회지
• /
• 제51권1호
• /
• pp.25-31
• /
• 2014

New green phosphor is synthesized by reducing $LiAlO_2:xEu^{3+}$ phosphors in a low pressure $H_2$ atmosphere. The $LiAlO_2:xEu^{3+}$ prepared by a solid state reaction method is reported as red phosphor. The effect of the reduction treatment on the $LiAlO_2:xEu^{3+}$ on the crystalline phase change and photoluminescence (PL) property are characterized. The reduced phosphor had a broad green light spectrum centered at 524 nm. The PL intensity of the reduced phosphor increased to a maximum at the reduction temperature of $1100^{\circ}C$. The PL intensity decreased with a further increase in the reduction temperature. The crystalline phase constituting the reduced phosphor varied with the temperature. A new crystalline phase $Li_2Al_4O_7$ was observed at $1100^{\circ}C$. The origin of the green-light emission is discussed in relation to the crystalline phase change.

• Environmental Engineering Research
• /
• 제24권4호
• /
• pp.529-542
• /
• 2019

Nowadays, drying methods for municipal solid waste quality improvement have been adopted in the developed and developing countries to valorize wastes for a renewable energy source, reduce dependency on fossil fuel and keep safer disposal at landfills. Among them, biodrying, biostabilization, thermal drying and solar drying are the most common. Drying of municipal solid waste could offer several environmental and economic benefits. Therefore, this review highlighted the drying methods for municipal solid waste quality improvement around the world and compared them based on the reduction of moisture, weight and volume of municipal solid wastes against drying temperature and time by using statistical analysis. It was observed that the drying temperature of different drying methods accounted for 115 ± 40℃ for thermal drying, 59 ± 37℃ for solar drying, 55 ± 15℃ for biodrying and 58 ± 11℃ for biostabilization. Among the drying methods, thermal drying provided the shortest drying time. The moisture reduction, weight reduction, volume reduction and heating value increase of municipal solid waste could vary with drying temperature and time. Finally, the benefits and drawbacks of different drying methods were specified, and recommendations were made for the future efficient drying.

• 한국재료학회지
• /
• 제20권1호
• /
• pp.42-46
• /
• 2010

Phosphorus exhibits considerable segregation in steelmaking slag. In order to recover phosphorus from slag to $K_3PO_4$ via molten iron, a carbothermic reaction using microwave heating was suggested recently. The carbothermic reduction of phosphorus from slag to molten iron using microwave heating was carried out at 2073K. However, at this temperature the thermodynamic properties of both slag and molten iron cannot be determined experimentally. Therefore, the computational approach of the so-called CALPHAD method is very useful to understand the transfer of phosphorus from slag to metal and to enhance this reaction. In the present investigation, a theoretical study of the reduction behavior of phosphorus in slag was carried out at much lower temperatures using the recently developed thermodynamic database in the FactSage program. The calculated results showed reasonable accordance with the experimental data; namely, the thermodynamic database could be applied successfully to higher temperature reactions. The current study found that higher temperature and high $SiO_2$ concentration are favorable for the recovery of phosphorus from slag.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1218-1226
• /
• 2004

This paper presents thermal behaviors and performances of a fresh air load reduction system by using earth tube system combined with air-heated solar collector. The earth tube system reduces a fresh air load by heat exchange with soil throughout the year. In the previous experimental research, it was clarified that the earth tube system was very useful as a fresh air load reduction system. However, since outlet temperature of the fresh air which was heated by earth tube system was below 15$^{\circ}C$ in winter, it is not suitable to introduce the fresh air into the place of residence directly. Therefore, a simulation model using the simple heat diffusion equation was used to examine a rising effect of outlet air temperature in winter by combining with air-heated solar collector. An improvement of annual performance by control of operation is also quantitatively examined. In conclusion, it is confirmed that its performance is improved by control of operation throughout the year and outlet air temperature rose by combining with air-heated solar collector.