• 한국화재소방학회논문지
• /
• 제12권3호
• /
• pp.11-20
• /
• 1998

천장아래에 형성된 연기흐름을 대상으로 Laser 평면광과 열전대를 이용하여 연기선단의 위치를 추적하였다. 새로운 실험방법을 이용하여 연기선단의 도착순간을 열전대의 온도신호로부터 판단하는 종래의 직관적 기준을 평가하였다. 이러한 실험방법에서 사용된 Laser 평면광은 연기를 가시화 하기 위한 종래의 여러방법에 비교하여 뚜렷한 장점들이 있음을 입증하였다.

• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.23-34
• /
• 2020

Two-phase flow and heat transfer characteristics during the reflood phase of a single heated rod in the KHU reflood experimental facility were examined. Two-phase flow behavior during the reflooding experiment was carefully visualized along with transient temperature measurement at a point inside the heated rod. By numerically solving one-dimensional inverse heat conduction equation using the measured temperature data, time-resolved wall heat flux and temperature histories at the interface of the heated rod and coolant were obtained. Once water coolant was injected into the test section from the bottom to reflood the heated rod of >700℃, vast vapor bubbles and droplets were generated near the reflood front and dispersed flow film boiling consisted of continuous vapor flow and tiny liquid droplets appeared in the upper part. Following the dispersed flow film boiling, inverted annular/slug/churn flow film boiling regimes were sequentially observed and the wall temperature gradually decreased. When so-called minimum film boiling temperature reached, the stable vapor film between the heated rod and coolant was suddenly collapsed, resulting in the quenching transition from film boiling into nucleate boiling. The moving speed of the quench front measured in the present study showed a good agreement with prediction by a correlation in literature. The obtained results revealed that typical two-phase flow and heat transfer behaviors during the reflood phase of overheated fuel rods in light water nuclear reactors are well reproduced in the KHU facility. Thus, the verified reflood experimental facility can be used to explore the effects of other affecting parameters, such as CRUD, on the reflood heat transfer behaviors in practical nuclear reactors.

• 한국환경과학회지
• /
• 제20권9호
• /
• pp.1141-1149
• /
• 2011

The three-dimensional hydrodynamic model was simulated to understand coastal sea front of formation and seasonal variation in the Southern Sea of Korea. In this study, we used to concept of stratification factor, to realize seasonal distribution of stratification coefficient which of seasonal residual flow, considered with, tide, wind and density effect. Tidal current tends to flow westward during the flood and eastward during ebb. The current by the wind stress showed to be much stronger the coastal than the offshore area in the surface layer. And the current by the horizontal gradient of water density showed to be relatively weak in the coastal area, with little seasonal differences. On the other hand, the flow in the offshore area showed results similar to that of the Tsushima Warm Current. The stratification factor (SHv) was calculated by taking into account the total flow of tide, wind and density effect. In summer, the calculated SHv distribution ranged from 2.0 to 2.5, similar to that of the coastal sea front. The horizontal temperature gradient showed to be strong during the winter, when the vertical stratification is weak. On the other hand, the horizontal gradient became weak in summer, during which vertical stratification is strong. Therefore, it is presume that the strength of vertical stratification and the horizontal temperature gradient affect the position of the coastal sea front.

• 해양환경안전학회지
• /
• 제11권1호
• /
• pp.77-82
• /
• 2005

동해의 심층수 형성은 크게 대륙주변부 대류와 외양대류에 의한 것으로 알려져 있다. Vladivostok 연안과 subpolar front사이에서 겨울철에 발생하는 심층수의 형성은 외양대류에 의한 가능성이 높은 것으로 설명되고 있으며, 침니 현상이 이러한 결과를 됫받침 하고 있다. 본 논문에서는 외양대류에 의한 심층수 형성과정의 초기단계 즉 침니 현상의 전 단계에 나타나는 현상을 포텐셜 와도, 지형류, 수온, 염분, 용존산소의 분포로부터 확인하였다. 포텐셜와도의 분포에서 나타난 와동류는 Vladivostok 연안과 subpolar front 사이에 위치하며, 와동류의 분포 위치는 겨울철 심층수 형성 가능성이 높은 해역과 잘 일치한다. 특히 대륙의 지형적인 특성으로 인한 바람장의 변화는 본 연구에서 나타난 시계반대방향의 와동류가 형성될 수 있음을 보여주며, 그 결과로 나타나는 dome 구조의 밀도 분포는 외양대류의 초기 단계에서 나타나는 현상을 잘 보여준다.

• 대한기계학회논문집B
• /
• 제29권6호
• /
• pp.722-729
• /
• 2005

Design analysis of the solid oxide fuel cell and gas turbine combined power system is performed considering different methods for preheating cell inlet air. The purpose of air preheating is to keep the temperature difference between cell inlet and outlet within a practical design range thus to reduce thermal stress inside the cell. Three different methods considered are (1) adopting a burner in front of the cell, (2) adopting a preheater (heat transfer from the main combustor) in front of the cell and (3) using recirculation of the cathode exit gas. For each configuration, analyses are carried out for two values of allowable maximum cell temperature difference. Performance characteristics of all cases are compared and design limitations are discussed. Relaxation of the cell temperature difference (larger difference) is proved to ensure higher efficiency. Recirculation of the cathode exit gas exhibits better performance than other methods and this advantage becomes more prominent as the constraint of the cell temperature difference becomes more severe (smaller temperature difference).

• 한국환경과학회지
• /
• 제12권3호
• /
• pp.257-263
• /
• 2003

Oceanographic features around Korean waters related to the global change were studied by analysis of the longterm variation of water temperature, dissolved oxygen, sea level of the surface layer with 1$^{\circ}C$ temperature, spatial position of the subpolar front in the East Sea/Japan Sea (the East sea hereafter) and the Wolf Sunspot Number. With the global warming, the temperature of Korean waters has been increased 0.5∼1.0$^{\circ}C$ for 33years (1968∼2000). In case of the dissolved oxygen in the East Sea has been decreased 0.46$m\ell$/$\ell$. Year to year vertical fluctuations of the monthly anomalies of the surface layer with 1$^{\circ}C$water in the East Sea have predominant periods with 15years as the longterm variation of Arctic climate, 12 and 18years as the El Nino-Southern Oscillation. Spatial position of the subpolar front in the East Sea moved to northern part of the sea from the southern part of the sea with the increasing sea surface temperature. The relationship between the number of Wolf Sunspot and the anomalies of sea surface temperature was very closer after the late of 1980s than those before the early of 1980s in Korean waters.

• 해양환경안전학회지
• /
• 제10권1호
• /
• pp.55-59
• /
• 2004

1995년도 1996년 6월에 실시된 CREAMS 항해 관측 자료를 이용하여 Wasaka bay 연안역의 수온역전 현상을 조사하였다. 수온역전현상은 대부분 20m 이천의 상층부에 위치하였으며, 특히 쓰시마난류와 연안수와의 경계역 부분에 형성되었다. 쓰시마난류는 고온${\cdot}$고염분수의 특징을 가지며, 이러한 고수온은 경계역 부분에서 수온역전 현상을 초래하여 밀도 역전현상을 일으키는 작용을 하는 반면, 고염분은 밀도를 증가시켜 주는 작용을 하여 수온역전에 따른 밀도역전현상을 막아주는 역할을 한다.

• 한국식품영양과학회지
• /
• 제21권2호
• /
• pp.213-218
• /
• 1992

식품의 동결중에 생성되는 빙결정의 크기에 미치는 동결조건의 영향을 조사하고 그 관계를 정량적으로 평가함과 아울러 동결조건과 빙결정 분산구조와의 관계를 이론해석에 의해 조사한 결과, 1. 동결이동속도 u는 생성빙결정의 평균경 d$_{p}$와 u .d$_{p}$/D~constant의 관계에 있음을 간단한 차원해석에 의해 예측이 가능하였다. 2. 2% 한천 겔, 5%한천 겔, 20% 젤라틴 겔, 돈육의 순서로 동결점에 도달하는 시간이 빨라지며 동결시간 및 최대빙결품 생성대의 통과시간은 냉매온도와 선형적인 관계를 나타내었다. 3. 대두 단백질 겔중에 생성되는 빙결정의 평균경 d$_{p}$와 동결계면 이동속도 u 는 반비례 관계를 나타내었으며, 이로부터 구해진 u .d$_{p}$의 값은 3.4$\times$$10^{-6}$ $\textrm{cm}^2$/sec로 예측 이론식이 유효한 것으로 사료되었다. 4. 동결보존중의 대두 단백질 겔 내부에 생성된 빙결정의 성장에 미치는 보존온도의 영향을 조사한 결과, 양자가 빙결정의 성장에 미치는 영향은 거의 없는 것으로 나타났다. 5. 동결조건과 동결계면구조와의 사이에 Moving velocity of freezing front= (Mass transfer rate of water at freezing front)$\times$ (Surface area of freezing front) 의 관계를 나타내었다.

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.330-335
• /
• 2009

The principal objective of this study was to investigate changes in ice dendrite size during the freezing of tuna, in order to formulate a mathematical model of ice dendrite size. The tuna was frozen via a uni-directional heat transfer. Thermogram analysis allowed us to determine the position of the freezing front versus time, which is referred to as the freezing front rate. The morphology of the ice dendrites was assessed via scanning electron microscopy after freeze-drying, and the retained pore size was measured as ice dendrites. We noted that the mean size of ice dendrites increased with the distance to the cooling plate; however, it decreased with reductions in the cooling rate and the cooling temperature. In addition, shorter durations of the freeze-drying process decreased the freezing front rate, resulting in a larger size of the ice dendrite pores that operate as water vapor sublimation channels. According to our results, we could derive a linear regression as an empirical mathematical model equation between the ice dendrite size and the inverse of the freezing front rate.

• 한국전기전자재료학회논문지
• /
• 제24권4호
• /
• pp.328-332
• /
• 2011

The formation of front metal contact silicon solar cells is required for low cost, low contact resistance to silicon surface. One of the front metal contacts is Ni/Cu plating that it is available to simply and inexpensive production to apply mass production. Ni is shown to be a suitable barrier to Cu diffusion into the silicon. The process of Ni electroless plating on front silicon surface is performed using a chemical bath. Additives and buffer agents such as ammonium chloride is added to maintain the stability and pH control of the bath. Ni deposition rate is found to vary with temperature, time, utilization of bath. The experimental result shown that Ni layer by SEM (scanning electron microscopy) and EDX analysis. Finally, plated Ni/Cu contact solar cell result in an efficiency of 17.69% on $2{\times}2\;cm^2$, Cz wafer.