• 제목/요약/키워드: Temperature controlling effect

검색결과 278건 처리시간 0.029초

An Investigation of the Sample Rotation Effects on Suppression of Convective Flows in PGSE Diffusion NMR Experiments

  • Kim, Minkyoung;Chung, Kee-Choo
    • 한국자기공명학회논문지
    • /
    • 제20권2호
    • /
    • pp.61-65
    • /
    • 2016
  • Undesirable convective flow in an NMR tube inhibits the accurate measurement of diffusion coefficients by NMR spectroscopy. To minimize the convection effects, various methods have been suggested, and it has been known that the use of sample rotation can be useful. However, it has not been clearly examined that the convection suppressing effect of the sample rotation under the different spinning speeds. In this study, the relation between convective flow and the sample rotation was investigated using PGSE NMR diffusion experiments to reveal the feasibility for controlling the convective flow in an NMR tube by sample rotation itself. The viscosity effect was also examined using solvents with four different viscosities, acetone-$d_6$ chloroform-d, pyridine-$d_5$, and $D_2O$. The sample rotation showed apparent convection suppressing effects at all temperature range for the low viscosity solvents, acetone-$d_6$ and chloroform-d, even at the faster than 5 Hz spinning rate. The similar patterns were also observed for pyridine-$d_5$ and $D_2O$, which have higher viscosity. This effect was observed even at high temperatures where convective flow arises conspicuously.

차광막를 이용한 하절기 콘크리트포장의 초기온도 관리 방안연구 (A Study for Controlling Early-age Temperature Rise of the Concrete Pavement by Shadow Tent in Hot Weather Construction)

  • 조영오;김형배;서영찬;안성순
    • 한국도로학회논문집
    • /
    • 제6권4호
    • /
    • pp.75-89
    • /
    • 2004
  • 콘크리트 포장의 장기 공용성은 시공조건과 환경조건에 크게 좌우된다. 즉 초기에 무작위 균열이나 균열틈이 많이 벌어진 경우 포장수명을 저감시키는 원인이 된다. 시공당시의 온도와 습도, 시멘트와 골재의 종류, 양생조건들은 콘크리트포장의 품질에 영향을 미치는 중요한 요소이다. 그 중에서도 대기온도와 수화열의 증가에 의한 높은 온도차이는 심각한 초기균열을 발생시키는 원인이 되는 것으로 알려져 있다. 본 연구에서는 차광막을 사용하여 콘크리트 슬래브의 온도를 제어하여 초기균열이 발생할 가능성을 낯추고 슬래브질이의 온도차이에 의해 발생되는 curling stress를 줄일 수 있었고, 강도에 있어서는 차광막 설치 구간이 일반시공구간보다 장기강도를 크게 할 수 있음을 확인하였다. 또한 콘크리트포장의 포설 후 72시간의 강도 및 응력을 예측하는 프로그램인 HIPERPAV를 사용하여 초기에 균열이 발생할 가능성을 비교해본 결과 차광막을 설치한 구간이 본 시험시공의 예에서 균열이 발생하지 않을 가능성(reliability)이 차광막을 설치하지 않은 구간(일반시공구간) 72.5%. 차광막설치 구간 95%로 나타나 차광막설치 구간이 차광막을 설치하지 않은 구간보다 균열이 발생하지 않을 가능성을 크게 증가시킬 수 있을 것으로 분석되었다.

  • PDF

차광율 및 차광방법이 온실내부의 온도변화에 미치는 영향 (Effects of Shading Rate and Method of Inside Air Temperature Change in Greenhouse)

  • 이석건;이현우;김길동;이종원
    • 생물환경조절학회지
    • /
    • 제10권2호
    • /
    • pp.80-87
    • /
    • 2001
  • 온실의 차광설계에 필요한 기초자료를 제시하기 위하여 온실모형과 실험온실을 이용하여 외부차광재의 적정 설치간격 분석, 차광재별 광투과율 분석, 차광율에 따른 온실내부온도의 변화 분석, 차광의 온실내부의 지온변화에 미치는 영향 분석 및 외부차광과 내부차광의 차광효과 비교를 실시하였다. 외부경사차광시 온실 지붕과 차광재의 설치간격은 10~30 cm에서 차광효율이 가장 좋은 것으로 나타났으나 환기창의 개폐를 위한 공간이 필요하지 않는 온실에서는 10cm 정도이면 충분한 간격이 될 것으로 판단된다. 경사차광의 온도차가 수평차광보다 높게 나타나 무환기 상태에서는 경사차광의 차광성능이 수평차광보다 더우수함을 알 수 있었다. 차광재 제작사에서 제시한 투과율과 실제 온실에서 계측한 투과율이 상당한 차이가 있으므로 차광재를 온실의 온도환경제어 목적으로 이용하고자 할 경우에는 차광재의 투과율을 미리 측정하여 검증할 필요가 있었다. 자연환기와 무환기 조건 모두에서 85% 차광온실이 55%차광온실 보다 최대 약 4$^{\circ}C$, 평균 약 2$^{\circ}C$ 정도의 승온억제효과가 더 있었다. 차광온실 내무의 지온변화는 차광율과 차광방법에 따른 차이는 매우 작았으나 무차광온실과는 큰 차이가 있었기 때문에 온실내부의 지온변화는 차광율과 차광방법 보다는 차광의 유무에 큰 영향을 받는다는 사실을 알 수 있었다. 50%인 차광재가 55% 차고아재보다 광투과율이 높음에도 불구하고 차광율 50%인 외부차광온실이 차광율 55%인 내부차광온실보다 승온억제효과가 더 우수한 것으로 분석되었다. 이러한 결과는 외부차광시 차광재가 흡수한 열이 온실내부로 전달되지 않을 뿐만 아니라 천장을 통한 환기효율이 내부차광보다 양호하기 때문인 것으로 판단되었다.

  • PDF

Development of Naturally Degradable "Rice Polymer" For Organic Weed Management of Red Pepper and Rice

  • Kang, C.K.;Nam, H.S.;Lee, Y.K.;Lee, S.B.;Lee, B.M.;Oh, Y.J.;Jee, H.J.;Hong, M.K.;Jung, K.W.;Lee, Y.J.;Choi, Y.H.
    • 한국유기농업학회지
    • /
    • 제19권spc호
    • /
    • pp.119-122
    • /
    • 2011
  • Among the developed bio-degradable polymer films as compared with transparent film(White), black polymer film was significantly more effective for controlling weeds in red pepper. Also, we found that white and black polymer mulching had 81.8% and 97.9% of managing weed controlling effects in rice, respectively. Compared to non-mulched rice paddy with water supply, the non-mulched rice paddy without any water supply has stopped its growth at 41 days after transplanting, while polymer-mulched rice paddy without water supply had about 60% of normally growing rice plants. This shows the polymer treatment has a remarkable effect on water and power saving, solution of herbicidal resistance, avoidance of herbicidal influence to eco-system etc. When the naturally decomposing polymer was used, a temperature was elevated as high as $4.7^{\circ}C$ on maximum and $2.6^{\circ}C$ on average. Also the naturally decomposing polymer accelerated rooting by 7 days and lowered a stress level from transplanting. The weed control effect mulched by polymer was remarkable as 98.7%. The polymer now, after 294 days treated on the rice paddy, has been completely decomposed.

식물생산공장식 양액재배시 근권부 온도가 장미의 생육 및 품질에 미치는 영향 (Effect of Root Zone Temperature on the Growth and Quality of Single-Stemmed Rose in Cutted Rose Production Factory)

  • 이혜진;이용범;배종향
    • 생물환경조절학회지
    • /
    • 제13권4호
    • /
    • pp.266-270
    • /
    • 2004
  • 장미 식물공장식 양액재배는 고품질의 절화를 대량으로 계획 생산할 수 있는 시스템으로 장미 수출증가에 따라 기존의 재배 방식에서 식물공장 형태로의 전환이 필수적이다. 또한 식물공장에서의 경제적이고, 효율적인 생산을 위한 지하부 환경의 최적 관리 기술 개발이 절실한 실정이다. 따라서 장미 식물공장에 적합한 single-stemmed rose 수경재배시 배양액의 온도과 같은 지하부 환경요인이 장미의 생육과 품질에 미치는 영향을 알아보고자 실험하였다. 배양액의 온도에 따른 'Red Velvet'의 광합성률, 증산량, 생육 및 수량이 $15\~20^{\circ}C$에서 높게 나타나 적정 배양액 온도임을 알 수 있었다. 반면에 'Vital'은 $10\~15^{\circ}C$에서 생육이 가장 왕성하고 $30^{\circ}C$의 고온에서는 거의 생육이 이루어지지 않아 'Red Velvet'과는 달리 고온의 배양액에 대한 적응력이 낮은 것으로 나타났다.

Effects of Pretreatment for Controlling Internal Water Transport Direction on Moisture Content Profile and Drying Defects in Large-Cross-Section Red Pine Round Timber during Kiln Drying

  • Bat-Uchral BATJARGAL;Taekyeong LEE;Myungsik CHO;Chang-Jin LEE;Hwanmyeong YEO
    • Journal of the Korean Wood Science and Technology
    • /
    • 제51권6호
    • /
    • pp.493-508
    • /
    • 2023
  • Round timber materials of 600 mm length, cut from large-cross-section round timber of red pine (Pinus densiflora S. et Z.) of 450 mm width and 4.2 m length, were prepared as the target of kiln drying in this study. After treating the target materials through end sealing (ES), end sealing - kerfing (ES-K), lateral sealing - end sealing - boring (LS-ES-B), or lateral sealing - partial end sealing (LS-PES), the effects of the treatment on the incidence of drying defects were determined. The target materials with exposed lateral surface and sealed cross surface were steamed at the initial temperature of 65℃ above the official pest control temperature of 56℃, followed by kiln drying toward the final temperature of 75℃. The target materials with sealed lateral surfaces, on the other hand, were dried at the initial temperature of 90℃ at almost the maximum temperature of conventional kiln drying, as there is no risk of early check formation caused by surface moisture evaporation. The final temperature was set at approximately 100℃. The drying time, taken for the target materials with initial moisture content of 70%-80% to reach the target moisture content of 19%, varied across treatment conditions. The measured drying time was 1,146 hours (approximately 48 days) for the timber with sealed cross surface and 745 hours (approximately 31 days) for the timber with sealed lateral surface, until the moisture content reached the target level. The formation of surface checks could not be prevented in the control and ES groups, but a definite preventive effect was obtained for the LS-ES-B and LS-PES groups.

폐수 내 고농도 free ammonia(FA)가 미세조류의 성장 및 기질제거에 미치는 영향 평가 (Effect of high free ammonia concentration on microalgal growth and substrate uptake)

  • 김은지;조재형;노경호;남귀숙;황선진
    • 상하수도학회지
    • /
    • 제30권6호
    • /
    • pp.715-723
    • /
    • 2016
  • This study investigated the effect of high concentration of free ammonia on microalgal growth and substrate removal by applying real wastewater nitrogen ratio. To test of this, the conditions of free ammonia 1, 3, 6, 9, 12, 15 mg-N/L are compared. After 3 days of incubation, algal growth of Chlorella vulgaris and carbon removal rate are respectively lower in the reactors of FA 12, 15 mg-N/L compared to the others. This indicates that the high concentration of free ammonia, in this case, above 12 mg-N/L, has negative effect on algal growth and metabolic activity. Also, high concentration of free ammonia causes the proton imbalance, ammonium accumulation in algae and has toxicity for these reasons. So, we have to consider free ammonia in applying the microalgae to wastewater treatment system by the way of diluting wastewater or controlling pH and temperature.

Effect of Differential Thermal Drying Conditions on the Immunomodulatory Function of Ginger

  • Lee, Ji Su;Kim, Bomi;Kim, Jae Hwan;Jeong, Minju;Lim, Seokwon;Byun, Sanguine
    • Journal of Microbiology and Biotechnology
    • /
    • 제29권7호
    • /
    • pp.1053-1060
    • /
    • 2019
  • Thermal drying is a common process used in the food industry for the modification of agricultural products. However, while various studies have investigated the alteration in physiochemical properties and chemical composition after drying, research focusing on the relationship between different dehydration conditions and bioactivity is scarce. In the current study, we prepared dried ginger under nine different conditions by varying the processing time and temperature and compared their immunomodulatory effects. Interestingly, depending on the drying condition, there were significant differences in the immunestimulating activity of the dried ginger samples. Gingers processed at $50^{\circ}C$ 1h displayed the strongest activation of macrophages measured by $TNF-{\alpha}$ and IL-6 levels, whereas, freezedried or $70^{\circ}C$- and $90^{\circ}C$-dried ginger showed little effect. Similar results were recapitulated in primary bone marrow-derived macrophages, further confirming that different dehydration conditions can cause significant differences in the immune-stimulating activity of ginger. Induction of ERK, p38, and JNK signaling was found to be the major underlying molecular mechanism responsible for the immunomodulatory effect of ginger. These results highlight the potential to improve the bioactivity of functional foods by selectively controlling processing conditions.

Antilisterial Effect of Bacteriocin SH01, Obtained from Enterococcus faecium SH01, in Ground Beef

  • Kim, Min-Ju;Jung, Miran;Kim, Wang June
    • 한국축산식품학회지
    • /
    • 제35권2호
    • /
    • pp.211-215
    • /
    • 2015
  • From the previous study, Enterococcus faecium SH01 was isolated from mukeunji, an over-ripened kimchi, and it produced bacteriocin SH01. Bacteriocin SH01 showed an inhibitory effect against Listeria monocytogenes ATCC 19111, a bacterial strain causing human listeriosis. Crude bacteriocin SH01 was purified by ammonium sulfate precipitation and its inhibitory activity at two concentrations (500 and 1,000 AU/g) against Listeria monocytogenes ATCC 19111 was investigated in ground beef at increasing temperatures (5, 10, 15, and 20℃) for 8 d. The number of Listeria monocytogenes ATCC 19111 significantly decreased (p<0.05) as the concentration of bacteriocin increased from 500 to 1,000 AU/g. Intrinsic crude protease activities in ground beef were examined and increased as the temperature increased. Experiments varying both the concentrations of added bacteriocin SH01 and temperature demonstrated a maximum inhibition (2.33 log reduction of bacteria) in samples containing 1,000 AU/g of bacteriocin SH01 incubated at 20℃. When the crude bacteriocin SH01 solution (1,280 AU/mL) was incubated with crude protease solutions at different temperatures, its activity decreased by only half (640 AU/mL), as assessed in an agar well diffusion assay. The finding that the antilisterial activity of bacteriocin SH01 increased with temperature can be explained by the fact that higher temperatures increase bacterial membrane fluidity, thereby promoting the cellular penetration of bacteriocin SH01 into L. monocytogenes. Bacteriocin SH01 may be an excellent candidate as a biopreservative for controlling L. monocytogenes growth in ground beef.

충돌형 분사기 형태의 액체로켓엔진용 가스발생기 연소성능시험 (Combustion Performance Tests of Fuel-Rich Gas Generator for Liquid Rocket Engine Using an Impinging Injector)

  • 한영민;김승한;문일윤;김홍집;김종규;설우석;이수용;권순탁;이창진
    • 한국추진공학회지
    • /
    • 제8권2호
    • /
    • pp.10-17
    • /
    • 2004
  • 본 논문에서는 액체로켓엔진용 160 kW급 터보펌프의 터빈을 구동하고, 액체산소와 케로신을 추진제로 사용하는 연료 과잉 가스발생기의 설계점 연소성능시험 결과에 대해 논의하였다. 충돌형 F-O-F 분사기로 구성된 헤드부, 물냉각 채널 연소실, torch igniter, turbulence ring 그리고 측정 링을 갖는 가스발생기에 대해 기술하였고, 설계점에서의 연소시험 및 turbulence ring 장착여부. 연소실 길이 변화에 따른 연소시험의 결과들에 대해 기술하였다. 연소시험 결과 가스발생기는 설계점에서 안정된 작동성을 보여주었고. 연소압력 및 온도 등의 성능은 예측치에 근접하는 결과였다. Turbulence ring은 출구에서의 가스온도를 균일하게 분포시켜 효과적인 혼합 장치임을 보여 주었고, 4∼6msec 정도에서의 연소가스 잔류시간은 연소효율에 큰 영향을 주지 않았다. 가스발생기 출구에서의 온도는 공급되는 추진제의 O/F ratio에 따라 매우 민감하게 변화하였다.