• 대한원격탐사학회지
• /
• 제16권1호
• /
• pp.47-54
• /
• 2000

한반도 기후 분석에 마이크로파 위성자료의 이용을 위해 1981년에서 1998년까지 18년간 한반도 4개의 고층 관측 지점에서 얻어진 온도자료와 위성자료를 비교하였다. 위성자료로 극궤도 위성인 NOAA위성에 탑재되어 있는 MSU(Microwave Sounding Unit) 채널 2와 채널 4 휘도온도를 이용하였다. 고층 관측소의 라디오존데 자료는 MSU 휘도온도와 비교하기위해 MSU 가중함수를 이용하여 고도마다 가중을 두어 월평균 온도 값을 만들어내었다. 월평균 기후값 비교에서 여름철에 라디오존데 온도가 MSU 휘도온도보다 높은 온도를 보였다. 두 온도사이의 상관에서는 채널2의 경우 0.72 - 0.76, 채널 4에서는 0.73 - 0.81정도를 보였다 18년 동안의 온도경향은 채널 2의 경우는 0.04$^{\circ}C$/year의 증가가 있었고, 채널 4의 경우는 -0.07$^{\circ}C$/year의 감소가 보였다.

• 한국도로학회논문집
• /
• 제11권4호
• /
• pp.143-152
• /
• 2009

본 연구의 목적은 현재 국내에서 적용되고 있는 동결지수와 동결깊이 산정의 타당성을 검증하는 것이다. 이에 국내에서 운영되고 있는 LTPP-SPS(Long Term Pavement Performance- Specific Pavement Study)구간의 대기온도와 포장체 깊이별 온도 데이터를 이용하여 동결지수와 동결깊이를 산정하였으며, 기존 계산식을 이용하여 산출된 동결깊이와 비교 분석하였다. 또한 이 구간들의 인근 측후소 데이터를 이용하여 연도별 동결지수 추이를 분석하였다. 본 연구 결과, 지구온난화에 의해 1987년 이후에는 동결지수가 급격히 감소하였으며, 현재 도로설계 시 적용되고 있는 동결지수가 과하게 적용되고 있음을 알 수 있었다. 이에 동결지수 산정 시 현행 30년 데이터를 토대로 산정하기보다 기후가 변화된 시점부터 현재까지의 추이를 분석하는 것이 바람직 할 것으로 사료된다. 또한 LTPP-SPS 구간에서 측정된 포장체 깊이별 온도데이터를 분석한 결과, 동상방지층이 설계되어 있는 3개구간에서 대체적으로 보조기층까지만 동결이 발생하는 것으로 나타나, 동상방지층이 제 역할을 수행하지 못하는 것으로 나타났다. 실제 측정된 동결깊이와 계산식을 통해 산정된 동결깊이를 비교한 결과, 노상동결관입허용법을 이용한 설계방법이 실제 측정된 동결깊이와 가장 유사한 경향을 나타내었다.

• 대기
• /
• 제17권4호
• /
• pp.471-481
• /
• 2007

전국 (60개 지점 평균)과 서울의 온도 및 강수를 분석하였다. 분석된 기간은 전국의 경우 1973-2007 년 기간 중 8월과 여름 및 서울의 경우 1908-2007년 기간 중 8월과 여름 이다. 금년 8월과 여름은 전국과 서울 모두 기온 (평균, 최고, 최저)이 평년에 비해 높았다. 전국의 경우 1973년부터 서울의 경우 1908년부터 8월과 여름 모두 최저기온이 꾸준히 증가하는 경향을 보인다. 최저 기온의 상승률은 평균 및 최고기온에 비하여 높다. 이러한 최저기온의 상승은 현재 전 지구적인 추세이며 전지구 온난화에 따른 증발량의 증가로 구름의 양이 증가하게 되어 최저기온이 상승한 것으로 해석하고 있다. 열대야라 불리는 최저기온 $25^{\circ}C$ 이상인 날은 8월과 여름 모두 1973년부터 2007년 현재까지 꾸준히 증가한다. 이는 전 지구 온난화와 도시화의 효과가 복합적으로 작용한 결과이다. 금년 8월의 전국 강수량 (60개 지점 평균)은 330.9mm 로 평년 (265.0 mm)보다 65.9 mm 많았다. 하지만 서울의 금년 8월 강수량은 237.6 mm 로 평년 (348.0mm)에 비해 110.4 mm 적었다. 전국의 금년 여름 강수량은 676.3 mm로 평년 (699.9 mm)과 비슷하였으며 서울은 566.2 mm 로 평년 (809.2 mm)모다 243.0 mm 적었다. 1973년부터 2007년까지 8월과 여름의 강수량을 분석한 결과 비록 변동 폭은 크나 1973년부터 (서울의 경우 1908년부터) 8월과 여름 모두 강수량은 증가하는 경향을 보인다. 전국 60개 지점의 8월 및 여름의 호우 일수 (120 mm 이상/일, 80 mm이상/일, 1시간 최다 30 mm 이상, 10분간 최다 10 mm 이상)는 1973년부터 꾸준히 증가하는 경향을 보였으나 금년에는 예외적으로 집중호우 현상이 일반적으로 오히려 감소한 것으로 분석되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1006-1011
• /
• 2004

Recently, technical trend in machine tools is focused on enhancing of speed, accuracy and reliability. Such high speed usually results in thermal displacement and structural deformation. To minimize such thermal effect, most precision machine tools adopt high precision cooling system. This study proposes a temperature control for an oil cooler system using PI control with fuzzy logic. In a cooler system, the refrigerant flow rate is controlled by rotational speed of the compressor, where the outlet oil temperature is selected as the control variable. The fuzzy control rules iteratively correct PID parameters to minimize the error, difference between the outlet temperature and the reference one. Here, the ambient temperature is used as the reference one. To show the effectiveness of the proposed method, a series of experiments are conducted for an oil cooler system of machine tools, and the results are compared with the ones of a conventional PID control. The experimental results show that the proposed method has advantages of smaller overshoot and smaller steady state error.

• 동력기계공학회지
• /
• 제21권5호
• /
• pp.13-19
• /
• 2017

The effect of heat treatment temperature (HTT) on the mechanical properties of polyacrylonitrile (PAN)-based carbon fiber had been investigated. The heat treatment on the carbon fiber was conducted under high vacuum atmosphere of $10^{-6}mmHg$, and the range of temperature of $1,000^{\circ}C$ to $2,000^{\circ}C$. As a results, The tensile strength of carbon fiber and carbon fiber composites showed increasing tendency with the rise of heat treatment temperature. And, the shape parameter of Weibull distribution for the strength of carbon single fiber showed an increasing trend until $1,800^{\circ}C$. But the shape parameter of Weibull distribution for the strength of carbon fiber composites showed no clear tendency with the rise of heat treatment temperature. The cause of reinforcement effect of the carbon fiber by the heat treatment was regarded as the carbonization of carbon single fiber.

• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.68-78
• /
• 1997

A numerical study on the transient vapor flow and heat transfer is performed to investigate the ideal switching operation of heat source in a high temperature heat pipe. The cylindrical 2-dimensional compressible laminar vapor flow is assumed for the vapor space and the conjugate heat transfer for the heat pipe wall, wick and vapor space is calculated. The different boundary conditions such as constant heat flux, convective or radiative boundary at the outer wall are used respectively to compare the influence of boundary conditions on the transient operation. The transient temperature profile and the internal flow of the entire pipe for the switching operation are described as a result. The results show that the transient time is not significantly affected by the boundary conditions at the outer wall in present study. During the transition, two independent flows are observed temporarily on the right side and left side of the heat pipe. It is also found that the trend of temperature variation in the vapor region is different from the variation in the wick and wall region.

• Journal of Mechanical Science and Technology
• /
• 제16권9호
• /
• pp.1112-1120
• /
• 2002

Numerical investigations on air staging and fuel staging were carried out with a newly designed coaxial cyclone combustor, which uses the method of two stage coal combustion composed of pre-combustor and main combustor. The pre-combustor with a high air/fuel ratio is designed to supply gas at high temperature to the main combustor. To avoid local high temperature region in this process, secondary air is injected in the downstream. Together with the burned gas supplied from the pre-combustor and the preheated air directly injected into main combustor, coals supplied through the main burner react rapidly at a low air/fuel ratio. Strong swirling motion of cyclone combustor keeps the wall temperature high, which makes slagging combustion possible. Alaska, US coal is used for calculations. Predictions were made for various coal flow rates in the main combustor for fuel staging and for the various flow rate of secondary air in the pre-combustor for air staging. In-scattering angles are also chosen as a variable to increase residence times of coal particles. Temperature fields and particle trajectories for various conditions are described. Predicted temperature variations at the wall of the combustor are compared with corresponding experimental data and show a similar trend. The in-scattering angle of 20° is recommended to increase the combustion efficiency in the main chamber.

• 한국주조공학회지
• /
• 제35권4호
• /
• pp.88-98
• /
• 2015

The effects of quenching and tempering temperatures on the tensile, impact and corrosion properties of A487 alloy cast with different C contents of 0.16, 0.19 to 0.23 wt.% were examined. The impact tests were conducted at $25^{\circ}C$ and $-60^{\circ}C$ and the immersion test was performed using 3.5% NaCl solution for 14 days. The quenching temperature affected the mechanical properties of A487 alloy cast, while the magnitude of change varied depending on the C content. The increase in tempering temperature showed the typical trend of decreasing tensile strength and increasing impact properties. The change in quenching and tempering temperature in this study did not affect the corrosion properties of A487 alloy significantly. The change in mechanical and corrosion properties of A487 with different C contents was discussed based on the microstructural and fractographic observation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.277-280
• /
• 2006

The hydroformability of aluminum alloy sheets at elevated temperatures have been investigated in this study. It is necessary to analyze the variations of the mechanical properties that depend on the forming temperature and the heat conduction during warm hydroforming. Therefore, in this study a coupled simulation of plastic deformation and temperature distribution in the warm hydroforming process is performed and compared with experimental data. The multi-purpose code DEFORM-2D can handle this type of calculations but it takes high computation time if contact heat transfer between die, tube and pressure medium occurs. Experiments were conducted by high temperature tribometer(pin-on-disk) allowing measuring the friction coefficients of the aluminum alloys at several temperatures and these results are applied to the coupled simulation by which the optimal process parameters such as internal pressure and preset temperature on hydroformability can be determined. The comparison of the FE analysis with the experimental results has shown that hydroformability given by bulge height, and temperature distribution of the tube specimen make a little difference with the FE results but the trend predicted by simulation agrees well with experiments.

• 응용통계연구
• /
• 제22권3호
• /
• pp.515-530
• /
• 2009

Evaporation from surface water bodies is influenced by a number of meteorological parameters. The rate of evaporation is primarily controlled by incoming solar radiation, air and water temperature and wind speed and relative humidity. In the present study, influence of weekly meteorological variables such as air temperature, relative humidity, bright sunshine hours, wind speed, wind velocity, rainfall on rate of evaporation has been examined using 35 years(1971-2005) of meteorological data. Statistical analysis was carried out employing linear regression models. The developed regression models were tested for goodness of fit, multicollinearity along with normality test and constant variance test. These regression models were subsequently validated using the observed and predicted parameter estimates with the meteorological data of the year 2005. Further these models were checked with time order sequence of residual plots to identify the trend of the scatter plot and then new standardized regression models were developed using standardized equations. The highest significant positive correlation was observed between pan evaporation and maximum air temperature. Mean air temperature and wind velocity have highly significant influence on pan evaporation whereas minimum air temperature, relative humidity and wind direction have no such significant influence.