• 한국측량학회지
• /
• 제37권1호
• /
• pp.9-18
• /
• 2019

전 세계적으로 지구온난화현상이 심화되고 있으며, 특히 우리나라의 경우 급격한 산업 발전 등으로 인해 도시화가 진행되면서 도시열섬현상까지 발생되고 있다. 이렇게 도시의 온도가 상승하게 되면 주거 생활의 쾌적성 및 냉방부하와 같은 문제 등을 야기한다. 본 연구에서는 이러한 문제를 줄이기 위해 지붕 색상에 따른 쿨루프 성능 평가를 진행하였으며, 기존의 평지붕 축소 모형, 손잡이 형태의 열화상 카메라 또는 레이저 온도계를 이용하지 않고, 실제 건물과 UAV에 열적외선 카메라를 장착하여 원격탐사 기법으로 옥상 색상 (흰색, 회색, 초록색, 청색, 갈색, 검은색)에 따른 표면 온도를 취득하였다. 그 결과 흰색을 적용한 표면 온도가 다른 색상보다 11도에서 20도 낮게 나타났으며, 에어컨의 실내 온도와 디지털 온도계의 실내 온도 또한 흰색의 색상이 다른 색상보다 약 1.5도에서 4.4도, 약 1.5도에서 3.5도 낮게 측정되었다. 이를 통해 흰색이 쿨루프 성능이 가장 좋음을 확인할 수 있었으며, UAV와 열적외선 카메라를 통해 기존 다른 연구에서 사용했던 방법보다 신속하고, 편리하게 쿨루프 성능 평가가 가능함을 확인할 수 있었다.

• Journal of Hospice and Palliative Care
• /
• 제7권1호
• /
• pp.49-63
• /
• 2004

배경: 호스피스 암 환자에게 적합한 경과기록지의 부재 또한 적절한 암성 통증 관리의 장애요인으로서 기존의 "문제 지향식 의무기록"의 경과기록지 형식에서 벗어나 호스피스 암 환자를 위한 의무기록지(HOMR)를 개발하게 되었다. 방법 및 결과: 2004년 3월부터 5월 사이 고대 구로병원 호스피스 팀은 20여 차례의 모임을 갖고 호스피스 환자의 초기 평가 이후 경과기록에 사용할 수 있는 의무기록지를 개발하였다. 구성항목의 결정은 pilot study를 통해 수정과정을 거쳤다. HOMR은 A4용지 크기로 작성자를 위한 지침서 1장과 2장의 경과기록지로 구성되었다. 앞면에는 환자의 인적 사항, 현재 문제목록 및 활동 수행 능력 상태, 검사 결과, 1주일 간의 활력 징후 및 I/O, 배변 횟수가, 뒷면에는 통증 부위, 통증의 성격 및 강도, 약물 및 비약물 요법, 진정 정도, 동반 증상, 약물 부작용 등을 한꺼번에 기록할 수 있도록 구성되어 있다. 결론: 호스피스 암 환자를 위한 의무기록지는 짧은 여명과 다양한 신체 증상을 갖고 있으며 증상의 변화가 빠르지만 만성적인 경과를 보이는 호스피스 환자에게 적합하며 그 자체만으로도 교육자료로서의 가치가 높고 환자를 돌보는 데 있어 진료의 질을 평가하거나 심사할 수 있으므로 진료의 질을 높이는 역할도 기대된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.150-152
• /
• 2006

The DISCOVER Project (${\underline{D}}istributed$ ${\underline{I}}nformation$ ${\underline{S}}ervices$ for ${\underline{C}}limate$ and ${\underline{O}}cean$ products and ${\underline{V}}isualizations$ for ${\underline{E}}arth$ ${\underline{R}}esearch$) is a NASA funded Earth Science REASoN project that strives to provide highly accurate, carefully calibrated, long-term climate data records and near-real-time ocean products suitable for the most demanding Earth research applications via easy-to-use display and data access tools. A key element of DISCOVER is the merging of data from the multiple sensors on multiple platforms into geophysical data sets consistent in both time and space. The project is a follow-on to the SSM/I Pathfinder and Passive Microwave ESIP projects which pioneered the simultaneous retrieval of sea surface temperature, surface wind speed, columnar water vapor, cloud liquid water content, and rain rate from SSM/I and TMI observations. The ocean products available through DISCOVER are derived from multi-sensor observations combined into daily products and a consistent multi-decadal climate time series. The DISCOVER team has a strong track record in identifying and removing unexpected sources of systematic error in radiometric measurements, including misspecification of SSM/I pointing geometry, the slightly emissive TMI antenna, and problems with the hot calibration source on AMSR-E. This in-depth experience with inter-calibration is absolutely essential for achieving our objective of merging multi-sensor observations into consistent data sets. Extreme care in satellite inter-calibration and commonality of geophysical algorithms is applied to all sensors. This presentation will introduce the DISCOVER products currently available from the web site, http://www.discover-earth.org and provide examples of the scientific application of both the diurnally corrected optimally interpolated global sea surface temperature product and the 4x-daily global microwave water vapor product.

• 한국자기학회지
• /
• 제13권3호
• /
• pp.127-132
• /
• 2003

자성유체의 자연대류는 부력 이외에 자기체적력이 존재하기 때문에 뉴턴유체와 다르다. 본 연구에서는 좌측 및 우측 벽면이 고온 및 저온으로 설정된 정방형 케비티 공간내에서 자성유체의 자연대류를 실험하였다 실험은 열전대에 의한 온도측정과 감온액정에 의한 가시화를 실시하였다. 그 결과 케비티 공간내 자성유체의 전열특성 및 외부에서 가하는 자장의 방향과 세기에 따라 자연대류가 제어됨을 알 수 있었다.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.135-139
• /
• 2002

We have fabricated high-quality c-axis-oriented $MgB_2$ thin films by using a pulsed laser deposition technique. The thin films grown on (1 1 0 2) $Al_2$$O_3$ substrates show an onset transition temperature of 39.2 K with a sharp transition width of ~0.15 K. X-ray diffraction patterns indicate a c-axis-oriented crystal structure perpendicular to the substrate surface. We observed high critical current densities ($J_{c}$) of ~ 16 $MA/\textrm{cm}^2$ at 15 K and under self-field, which is comparable to or exceeds those of cuprate high-temperature superconductors. The extrapolation $J_{c}$ at 5 K was estimated to be ~ 40 MA/$\textrm{cm}^2$, which is the highest record for $MgB_2$ compounds. At a magnetic field of 5 T, the $J_{c}$ of~ 0.1 $MA/\textrm{cm}^2$ was detected at 15 K, suggesting that this compound is very promising candidate for the practical applications at high temperature with lower power consumption. As a possible explanation for the high current-carving capability, the vortex-glass phase will be discussed.d.d.d.

• Tribology and Lubricants
• /
• 제33권1호
• /
• pp.9-14
• /
• 2017

This paper presents a rotordynamic analysis and the operation of a power turbine applied to a 250 kW super-critical $CO_2$ cycle. The power turbine consists of a turbine wheel and a shaft supported by two fluid film bearings. We use a tilting pad bearing for the power turbine owing to the high speed operation, and employ copper backing pads to improve the thermal management of the bearing. We conduct a rotordynamic analysis based on the design parameters of the power turbine. The dynamic coefficients of the tilting pad bearings were calculated based on the iso-thermal lubrication theory and turbine wheel was modeled as equivalent inertia. The predicted Cambell diagram showed that there are two critical speeds, namely the conical and bending critical speeds under the rated speed. However, the unbalance response prediction showed that vibration levels are controlled within 10 mm for all speed ranges owing to the high damping ratio of the modes. Additionally, the predicted logarithmic decrement indicates that there is no unstable mode. The power turbine uses compressed air at a temperature of $250^{\circ}C$ in its operation, and we monitor the shaft vibration and temperature of the lubricant during the test. In the steady state, we record a temperature rise of $40^{\circ}C$ between the inlet and outlet lubricant and the measured shaft vibration shows good agreement with the prediction.

• 한방안이비인후피부과학회지
• /
• 제30권3호
• /
• pp.62-75
• /
• 2017

Objectives : The aim of this study is to evaluate possibility of DITI as prognosis evaluation tool of facial palsy. Methods : We investigate prognosis of facial palsy through EMR(Electronic Medical Record) of inpatient from December 2016 to June 2017. We evaluated the sex, age distribution, length of hospital stay, paralysis site, number of treatment after discharge, change of H-B Grade at entrance and exit, temperature difference of both sides of DITI, and Nerve Conduction Study(NCS) with reference to EMR recorded symptom change. Results : 1. Significant correlations were not found between DITI and House-Brackmann Grade change, NCS(%), the date of admission. 2. There was a negative correlation between NCS(%) and hospitalization period in patients with facial palsy. The higher the NCS, the faster the recovery rate of facial palsy. 3. In patients with facial palsy, the temperature difference between the two sides after the DITI image shows that the affected side tends to be lower than the normal side. Conclusions : In this study, only DITI temperature difference between both sides of face is not significant in determining the prognosis of facial palsy. Further research is needed to conduct DITI at the same time and to improve accuracy through a sufficient assessment of the degree of facial palsy.

• Corrosion Science and Technology
• /
• 제7권4호
• /
• pp.224-232
• /
• 2008

During the hot rolling process, steels develop an oxide scale on their surface. This scale can affect the mechanical properties of the rolled steel and its surface aspect. The main problem comes from the mechanical integrity of the oxide scales which could delaminate or crack, leading eventually to later oxide incrustation within the steel. The objective of the present work is to qualify the mechanical integrity of the iron oxide scales during the hot rolling process. The laboratory experiments use a four point bending test to simulate the mechanical solicitation which takes place during the rolling sequence of the steel slabs. The oxide scales grow on a mild steel at $900^{\circ}C$ under wet or dry atmosphere and the oxidized steel is then mecahnically tested at $900^{\circ}C$ or $700^{\circ}C$. The high temperature four point bending tests are completed with microstructural observations and with the record of acoustic emission to follow in-situ the mechanical damages of the oxide scales. The results show the role of water vapor which promotes the scale adherence, and the role of the temperature as the oxide are more damaged at $700^{\circ}C$ than at $900^{\circ}C$.

• 대한가정학회지
• /
• 제41권1호
• /
• pp.249-257
• /
• 2003

For the efficiency in extracting gromwell colorant, methanol, ethanol and aceton were used as solvents. Also, to compare the results when dyed in various conditions and on various fabrics, the ratio of water-dye mixture, pH, temperature, and varieties of fabrics -wool, silk, cotton, nylon, ramie- were selected. L, a, b, ΔE, munsell and K/S value of each sample was measured and compared for the practical use. Water-dye mixture of 5:5 ratio showed the optimum dyeability. Not to mention wool and silk, but also cotton showed a satisfying dying result at the acidity of pH4. As the temperature increased, the dyeability of all three fabrics improved greatly. Especially, wool showed the highest improvement in terms of dyeability as the temperature increased. K/S values for wool and nylon showed superior results to the others in the gromwell colorant. The resulting color turned out somewhat different depending on the solvents used and the sort of fabric that was tested on. When the gromwell colorant extracted with methanol or ethanol was applied, the color of fabrics came out as purple or purpleblue. When the colorant extracted with acetone was used, the color of fabrics came out to be redpurple. The colorfastness to light showed low glades regardless to whichever solvents were used. The grades of colorfastness to laundering were recorded low numerical values, and its record became even lower when the gromwell colorant extracted with aceton was applied. The staining grade of the colorfastness to laundering showed a good grade in the range of 4 to 5. All the dyed fabrics showed a excellent drycleaning fastness.

• 대기
• /
• 제32권3호
• /
• pp.207-221
• /
• 2022

In Jeju, on January 23, 2016, a cold surge accompanied by heavy snowfall with the most significant amount of 12 cm was the highest record in 32 years. During this period, the temperature of 850 hPa in January was the lowest in 2016. Notably, in 2016, the average surface temperature of January on the Polar cap was the highest since 1991, and 500 hPa geopotential height also showed the highest value. With this condition, the polar vortex in the northern hemisphere meandered and expanded into the subtropics regionally, covering the Korean Peninsula with very high potential vorticity up to 7 Potential Vorticity Unit. As a result, the strong cold advection, mostly driven by a northerly wind, around the Korean Peninsula occurred at over 2𝜎. Previous studies have not addressed this extreme synoptic condition linked to polar vortex expansion due to the unprecedented Arctic warming. We suggest that the occurrence of a strong Ural blocking event after the abrupt warming of the Barents/Karas seas is a major cause of unusually strong cold advection. With a specified mesoscale model simulation with SST (Sea Surface Temperature), we also show that the warmer SST condition near the Korean Peninsula contributed to the heavy snowfall event on Jeju Island.