• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.182-185
• /
• 2003

Temperature distribution and cooling load in binary current lead are analized, occurring fault current at DC Reactor type superconductor fault current limiter. It is assumed that Normal operating current is 300 A and fault current is 3000 A. Unsteady-state temperature distribution and cooling load of brass current lead optimized for 300 A and 1000 A are calculated by numerical method with TDMA. In the result of calculation, temperature increase in the brass current lead optimized for 300 A is higher than that in the brass current lead optimized for 1000 A, but the temperature increase in the brass current lead optimized for 300 A is not serious. Moreover, increase of cooling load in the brass current lead optimized for 300 A is higher than that in the brass current lead optimized for 1000 A, but normal cooling load in the brass current lead optimized for 300 A is lower than that in the brass current lead optimized for 1000 A. Therefore, designing current lead in superconductor fault current limiter had better to optimize for normal operating current.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2967-2972
• /
• 2010

Poly-N-vinylcarbazole/polyaniline (PVK-PANI) composites are synthesized by varying target loading concentrations of aniline (0.025 - 0.1 M). The surface morphology of the composites is studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The temperature-dependent DC conductivity of PVK-PANI composite films was studied at the temperature range of 300 - 500 K. The data suggest that the conductivity increase with an increase in aniline concentration in the composite with an increase in temperature. Further based on the conductivity behavior we can suggest that the PVK-PANI composites show a semiconducting behavior with a positive temperature coefficient of resistivity (TCR). The enhanced conductivity and the positive TCR of the PVK-PANI composite films may be due to the strong interaction between PANI and PVK in the composite films.

• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.587-593
• /
• 1995

Silicone oils used insulating substances exhibit the both of organic and inorganic properties, and it has many superior characteristics such as the high thermal resistance and low thermal oxidation level when compared to other insulation oils. In order to investigate the dielectric loss due to the increase of viscosity, silicone oils of viscosity 1, 2, 5[cSt] had been chosen as the specimen and experiment has been performed in the temperature range of -70[.deg. C] - 65[.deg. C] and frequency range of 30 - 1*10$\^$5/[Hz]. As a result, the linear decrease of loss at low frequency region in high temperature was due to the influence of applying frequency, whereas the increase of loss at high frequency region was contributed by electrode's resistance. And increasing viscosity, the activation energy increased from 3.77[kcal/mole] to 7.21[kcal/mole]. The dipole moment of specimen was become clear 1.48 - 2.26[debyel in high temperature region(5 - 65[.deg. C]) and 1.05 - 1.80[debye] in low temperature region (-70 - -25[.deg. C])respectively.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.6
• /
• pp.546-553
• /
• 2013

A clear increase in the average annual temperature is observed worldwide, and climate changes take place in response to that increase. This affects not only the ecosystem, but also to mankind. Of all those aspects of climate change, people are especially interested in the length of each season, and people acknowledge that the duration of spring and fall has been shortened over the past several years. Still, it is difficult to observe this kind of phenomenon with the simple analysis of dividing the seasons and calculating the duration. Therefore, this study attempted to set up a more intuitive standard which well reflects the current situation. This study also divided the daily climate into 4 states using the daily maximum and minimum temperature. Moreover, using the Hidden Markov Model, this study calculated the duration of each season and analyzed its tendency based on the daily temperature data of the last 53 years (1960~2012). According to the result, the duration of spring and fall showed mild decreasing tendency over the past 53 years, and the duration of fall decreased even more during the past 30 years in the Korean peninsula. After 1960, the start of spring was advanced, which decreased the length of winter for about 11 days. On the other hand, the duration of summer increased for about 25 days, which is consistent with the worldwide tendency of temperature increase.

• Journal of Fashion Business
• /
• v.9 no.6
• /
• pp.29-38
• /
• 2005

Natural dyes have attracted the worldwide attention because of its environmental advantage over synthetic dyes. However, most of natural dyes are expensive for mass production, strongly season and source dependent, and hard to store. In this study, coffee waste were used as natural dye to create beautiful colors. Coffee waste is inexpensive and easy to store, and provides a comparatively regular quality regardless of seasonand source. The effects of mordant agent concentration and mordanting temperature on dyeing efficiency of silk fabrics were investigated. Coffee extract dyed silk showed brilliant colors, and the colors were different with the kind of mordants. Cu, Sn, and Al mordanted silks showed golden yellow with subtle change of hue and value, while Fe mordanted silk showed a brownish green color. The increase in mordant concentration did not always increase the dyeability, and 0.5% o.w.f. mordant concentration was enough to get a satifactory result. Mordanting temperature also had little effect on the dyeability in case of Al, Cu, and Sn mordanted fabrics. Only Fe mordanted fabrics showed a better dyeability in the increase in mordating temperature. Coffee extract dyeing is an effective way using waste as resource and can create brilliant colors with minimal amount of mordant and under mild mordanting condition.

• Advances in nano research
• /
• v.7 no.3
• /
• pp.169-180
• /
• 2019

Plasmonic effects of gold and platinum alloy nanoparticles (Au-Pt NPs) and their comparison to size was studied. Various factors including ratios of gold and platinum salt, temperature, pH and time of addition of reducing agent were studied for their effect on particle size. The size of gold and platinum alloy nanoparticles increases with increasing concentration of Pt NPs. Temperature dependent synthesis of gold and platinum alloy nanoparticles shows decrease in size at higher temperature while at lower temperature agglomeration occurs. For pH dependent synthesis of Au-Pt nanoparticles, size was found to be increased by increase in pH from 4 to 10. Increasing the time of addition of reducing agent for synthesis of pure and gold-platinum alloy nanoparticles shows gradual increase in size as well as increase in heterogeneity of nanoparticles. The size and elemental analysis of Au-Pt nanoparticles were characterized by UV-Vis spectroscopy, XRD, SEM and EDX techniques.

• Journal of Biomedical Engineering Research
• /
• v.44 no.6
• /
• pp.476-481
• /
• 2023

The purpose of this study was to investigate the effects on skin temperature, pain, muscle tone, and ROM after applying the massage robot "PIRO-ZERO" to 6 men and 4 women in their 20s who complained of non-specific pain in the shoulder or back for more than 12 weeks. As a result of the study, there was a significant increase in skin temperature not only in the area where the massage was applied, but also on the opposite side and throughout the body due to increased blood flow. Pain in the upper trapezius, rhomboid, and erector spinae muscle was decreased, and muscle tone in the erector spinae muscles was significantly decreased. There was a significant increase in ROM of neck and trunk flexion, which is thought to be because the massage reduced muscle tone around the spine, increasing flexibility. In the future, as the safety and effectiveness of massage robots are further verified and the pressure, speed, and path become more diverse, satisfaction is expected to increase.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.127-133
• /
• 2012

In this paper, tests were carried out to monitor the effect of the curing temperature on autogenous shrinkage of the high strength cement mortar incorporating silica fume, blast furnace slag and fly ash ranged from 10%~30% by mass of cement. The curing temperatures were varied from $5^{\circ}C$ to $35^{\circ}C$, respectively. According to results, the setting time exhibited to delay with increase of admixture and drop of temperature. As for the effect of curing temperature on autogenous shrinkage, the increase of SF and BS resulted in an increase of autogenous shrinkage, while the use of FA decrease. The higher the curing temperature is, the greater the autogenous shrinkage is. This is due to the accelerated hydration rate of cement. It is found that the maturity does not consider the effect of curing temperature on autogenous shrinkage.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.3
• /
• pp.107-116
• /
• 2011

One of the major factors which increase urban temperature is roads. This paper is aimed to investigate the effect of urban roadside vegetation on the road surface temperature. For this, surface temperature was measured at 18 spots using the thermal imaging camera in terms of road components including use of roadside land use, roadway, sidewalk, roadside vegetation and vegetation median barrier. The size of the roadside vegetation and related urban road characteristics were also measured. In terms of the effect of roadside vegetation on a decrease in road surface temperature, the roadside land use as a green area or open space was the highest, followed by the size of vegetation median barrier and the size of roadside vegetation. Besides road surroundings, an increase in the green zone such as roadside vegetation and median strip vegetation has a significant impact on lowering road surface temperature. Therefore, a good solution for reducing urban heat island effects would be to increase the area of roadside vegetation and green areas along roads.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.27 no.4
• /
• pp.481-486
• /
• 2013

To investigate the effects of facial temperature and blood flow rates generated by Miso Facial Rejuvenation Acupuncture treatment. Ten women in their twenties to fifties with no skin diseases were recruited. Miso Facial Rejuvenation Acupuncture(MFRA) was performed on the both sides of their face. We measured their facial temperature using Digital Infrared Thermal Imaging(DITI) and blood flow rates using Laser Doppler Perfusion Imaging(LDPI) at pre-treatment, immediately, twenty and sixty minutes after treatment. We analyzed data using student's t-test(p<0.05). After MFRA treatment, facial temperature on the measurement area increased immediately from $30.5{\pm}1.0^{\circ}C$ to $31.5{\pm}1.0^{\circ}C$, a statistically significant increase. Sixty minutes after treatment, facial temperature on the measurement area decreased a little bit($30.2{\pm}0.6^{\circ}C$), but there was no statistical significance. After MFRA treatment, facial blood flow rates on the measurement area increased immediately from $165.1{\pm}52.3$ PU to $342.7{\pm}51.3$ PU, a statistically significant increase. Sixty minutes after treatment, facial blood flow rates measurement area were recovered almost at the same level as before treatment. MFRA treatment could increase facial temperature and blood flow rates.