• 제어로봇시스템학회논문지
• /
• 제18권6호
• /
• pp.519-525
• /
• 2012

Electric brake booster systems replace conventional pneumatic brake boosters with electric motors and rotary-todisplacement mechanisms including ECU (Electronic Control Unit). Electric booster brake systems require precise target pressure tracking and control robustness because vehicle brake systems operate properly given the large range of loading and temperature, actuator saturation, load-dependent friction. Also for the implement of imbedded control system, the controller should be selected considering the limited memory size and the cycle time problem of real brake ECU. In this study, based on these requirements, a sliding mode controller has been chosen and applied considering both model uncertainty and external disturbance. A mathematical model for the electric booster is derived and simulated. The developed sliding mode controller considering chattering problem has been compared with a conventional cascade PID controller. The effectiveness of the controller is demonstrated in some braking cases.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
• /
• pp.145-152
• /
• 1995

This paper presents a novel SOFLIC(self organizing fuzzy logic intelligent controller) for reactor rod control system in nuclear power plant. The output of fuzzy controller is gener ated by using two signal : the error between reference and average temperature, and the error between reference and neutron flux-converted temperatures. Flexibility of the controller is enhanced by using self-organizing feature and the controller respond to variation of system parameter with more precision. performances of the SOFLIC and PID are simulated with the model developed for a nuclear power plant. The SOFLIC is superior to PID : SOFLIC provides more rapid load following capability. more robustiness for variation in process dynamics and minimization of engineer's mistakes in controller design.

• Nuclear Engineering and Technology
• /
• 제29권1호
• /
• pp.15-24
• /
• 1997

The design and evaluation of a digital U-tube steam generator level controller of nuclear power plants, which uses model-based compensators to offset the inverse response behavior of water level, is described. Included is a review of steam generator level dynamics, a simulation model that replicates the effects of feedwater and steam flowrate as well as temperature on steam generator level, the design of both the compensators and the overall controller, and the results of simulation studies in which the performances of this model-based controller and existing analog ones were compared. The proposed digital steam generator level controller is stable and its use significantly improves the controllability of steam generator level.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.200-206
• /
• 2014

This paper deals with deterministic PI controller design based on dynamic characteristics for refrigeration system. The temperature control system of an oil cooler is described as a typical 2nd order model of the refrigeration system which has zeros in a transfer function. PI controller gains satisfying control specifications are represented by the dynamic characteristic functions using relationship between the parameters and the control specifications in the model. Phase margin was considered to increase robustness of the oil cooler control system. Furthermore, the influence of zeros in the model to the control specifications was analyzed in detail for improving control performance. The validity of the suggested PI controller design was investigated using the four types of gains which had been already confirmed their control performances through experiments.

• 한국항해항만학회지
• /
• 제41권6호
• /
• pp.395-400
• /
• 2017

Modbus는 각종 자동화 장비 감시 및 제어에 전 세계적으로 널리 사용되고 있는 자발적 산업표준 통신 프로토콜이다. 그러므로 선박, 빌딩, 기차, 비행기 등 Modbus를 이용하는 모든 장비들과 연결이 가능하여 환경변수의 측정 및 원격제어가 가능하게 된다. 기존의 Modbus는 Serial 통신을 기반으로 사용되어 왔으며, Modbus TCP는 오늘날 인터넷 프로토콜로 가장 많이 쓰이는 TCP/IP를 기반인 Ethernet 통신을 이용하므로 Serial 통신에 비해 빠르고 사물인터넷(Internet of Things) 환경에 연결이 가능하다. 본 논문에서는 Modbus TCP 통신 프로토콜을 이용하여 무선 Wi-Fi 환경에서 LED 조명을 제어하기 위한 알고리즘을 설계하고, 선박의 통합관리 시스템에서 외부 환경요인 확인 및 원격제어가 가능한 LED 제어기 회로를 설계 및 구현 하였다. 외부 환경요소인 온도, 습도, 전류, 조도 값들은 센서를 통해 제어기로 받아들이며 이 값들은 Modbus 프로토콜을 통해 선박의 통합관리 시스템에 알리게 된다. Modbus는 TCP 통신으로 Master 기기와 연결 되어 온도, 습도, 전류, 조도 상태 모니터링 및 LED 출력 값 확인이 가능하고 또한 사용자가 원격으로 RGB 값을 변경할 수 있기 때문에 원하는 색으로 변경이 가능하게 된다. 제작한 제어기의 구현 확인을 위해 모의 선박 관리 시스템을 만들어 온도, 습도, 전류, 조도 상태를 모니터링 하고, 원격으로 RGB 값을 변경 하여 제어기의 LED 조명색상이 변화 되는 것을 확인 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.169-173
• /
• 1997

In this paper, auto measuring system for evaluating sensing reliability of infrared temperature sensors is developed. A developed system is composed of temperature controller, measuring sysytem and operating S/W. A constant temperature control of a chamber is accomplished by multi-heater using PI control. It is shown that the control resulte of temperature are well followed to the desired temperature value. The developed untegrated measuring system will increase reliability and productivity of products.

• 한국컴퓨터정보학회논문지
• /
• 제9권3호
• /
• pp.127-133
• /
• 2004

본 연구에서 개발하고자 하는 기기는 K형 열전대를 이용하여 온도를 제어 할 수 있는 온도제어 시스템으로써, 안정된 전압 레귤레이터, 22Bit 디지털 변환기와 분해능이 22Bit로 이루어졌다. 미소 전압을 25배 증폭 할 수 있게 하였고, 0～1200도 사이의 온도를 DC 0.1V～DC 4.7V내에서 제어하도록 설계하였다. PIC16C74로 Micro-controller의 software와 hardware의 블록 다아이 그램을 고안하였으며, VFD기능과 Power Block간에 인터페이스가 가능하도록 구성하였다.

• 제어로봇시스템학회논문지
• /
• 제6권6호
• /
• pp.441-446
• /
• 2000

This paper presents an approach for the prediction of optimal heating load using a diagonal recurrent neural networks(DRNN) and data base system of outdoor temperature. In the DRNN, a dynamic backpropagation(DBP) with delta-bar-delta teaming method is used to train an optimal heating load identifier. And the data base system is utilized for outdoor temperature prediction. Compared to other kinds of methods, the proposed method gives better prediction performance of heating load. Also a hardware for the controller is developed using a microprocessor. The experimental results show that prediction enhancement for heating load can be achieved with the proposed method regardless of the its inherent nonlinearity and large time constant.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1000-1003
• /
• 1996

Nonlinear unified predictive control(UPC) algorithm was applied to the temperature control of a batch polymerization reactor for polymethylmethacrylate(PMMA). Before the polymerization reaction is initiated, the parameters of the process model are determined by the recursive least squares(RLS) method. During the reaction, nonlinearities due to generation of heat of reaction and variation of heat transfer coefficients are predicted through the nonlinear model developed. These nonlinearities are added to the process output from the linear process model. And then, the predicted process output is used to calculate the control output sequence. The performance of nonlinear control algorithm was verified by simulation and compared with that of the linear unified predictive control algorithm. In the experiment of a batch PMMA polymerization, nonlinear unified predictive control was implemented to regulate the temperature of the reactor, and the validity of the nonlinear model was verified through the experimental results. The performance of the nonlinear controller turned out to be superior to that of the linear controller for tracking abrupt changes in setpoint.

• 전자공학회논문지T
• /
• 제36T권1호
• /
• pp.51-57
• /
• 1999

본 논문은 온도센서 RSD. Pt 100Ω의 감지신호가 Temperature Controller의 릴레이 출력을 발생시키고 PLC 입력접점으로 입력시켜 1Scan Time으로 연산된 PLC 출력을 접점 P030에 Interface Unit를 연결시키므로 부하를 구동시키는 개발장비인 Wired Logic Type Unit에 대해서 기술하였다. 현재 PLC 교육장에서 프로그램 되어진 PLC가 부하를 구동시킬 수 있는 국내의 교육 PLC Test Kit로는 PLC와 부하 사이에 Interface 과정이 무시된 상태에서 PLC의 교육을 하도록 되어있다. 개발 키 트는 이 점을 보안하기 위해서 각종 센서 중 전자에서 언급한 온도 센서 Pt 100Ω을 이용한 온도 제어기의 릴레이 출력이 PLC 입력으로 피드백 되었을 때, 연산된 PLC 출력접점에 WLTU를 삽입시켜 PC, PLC와 부하 사이에 실시간 시스템으로 구동 시킬 수 있는 설비로, PLC 사용의 핵심원리를 쉽게 이해하고 알아 볼 수 있었다. 부하 Interface Unit인 WLTU의 구성은 구동 부분인 유 접점, 무접점, 센서, 지시 등, A접점, B접점 부하인 Motor로 나누었다.