• 제목/요약/키워드: Temperature Check

검색결과 578건 처리시간 0.029초

빙축열 시스템의 지능형 냉방부하예측에 관한 연구 (The Study on Intelligent Cooling Load Forecast of Ice-storage System)

  • 고택범
    • 전기학회논문지
    • /
    • 제57권11호
    • /
    • pp.2061-2065
    • /
    • 2008
  • In the conventional operation of ice-storage system based on operator's experience and judgement, the failure in forecast of cooling load occurs frequently due to operator's misjudgement and unskilled operation. This study presents the method of constructing self-organizing fuzzy models which forecast tomorrow temperature, humidity and cooling load periodically for economic and efficient operation of ice-storage system. To check the effectiveness and feasibility of the suggested algorithm, the actual example for forecasting temperature, humidity and cooling load of ice- storage system in KEPCO training institute, Sokcho, is examined. The computer simulation results show that the accuracy of temperature, humidity, cooling load forecast of the suggested algorithm is higher than that of the conventional methods.

온도 조절 커피포트 제작 (Made of temperature controlled coffee pot)

  • 황승진;조수장;권세현;황호연;유지연;신성윤
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 춘계학술대회
    • /
    • pp.307-308
    • /
    • 2018
  • 요즘 사람들은 커피포트를 자주 이용하여 물을 끓이곤 합니다. 커피포트는 100도에 맞춰서 켜지고 꺼지기만 하지만, 온도체크 센서와, 알고리즘을 이용해 원하는 온도에 맞춰 커피포트를 작동하게 하는 기법입니다.

  • PDF

사상 이론을 이용한 파이프 원주 용접의 온도 분포 예측에 관한 연구 (A Study on Prediction of Temperature Distribution in Pipe Girth Welding by Mapping Theory)

  • 조영태;나석주
    • 대한기계학회논문집A
    • /
    • 제24권12호
    • /
    • pp.2935-2944
    • /
    • 2000
  • Gas tungsten arc(GTA) welding is used to rrpiar the seat ring in swing type check valve in power plant because of its high weld quality. In order to automate the welding process, it is needed to analyze the process of inside pipe girth welding. In this study, the shapes of weld bead on pipe inside and outside were predicted and its validity was investigated. On the assumption that the welding arc had a bivariate gaussian distribution, analytical solution was derived to predict the temperature distribution in pipe weld using mapping under consideration of physical relationships. The size of weld bean could be predicted from this equation and its accuracy was verified by experiments.

연소온도 조건에 따른 FRP 및 시트커버 내장재의 연소가스 발생량 비교 (Comparison of combustion gas release for FRP and seat cover materials to the Furnace temperature)

  • 이덕희;정우성;이철규;유문천
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 춘계학술대회 논문집
    • /
    • pp.1527-1532
    • /
    • 2007
  • We have evaluated the toxicity of interior materials for the railway passenger car by checking the release of $CO_2$, CO, NOx, SO2, HCl, HF, HBr, HCN. The NOx is one of the most effective for the determination of Toxic Index R value. It is generally known that the mechanism of thermal NOx generation without the Interior Material nitrogen source. This study started from the idea to check the NOx difference according to the furnace temperature. But from the results, it was revealed that NOx is not so sensitive for the furnace temperature in case of solid burning. Other gases such as HCN, CO were more changeable to the furnace Temp. We reported the test result as for toxicity index r(x).

  • PDF

해석해를 이용한 질량변화가 있는 위성 부품에 대한 발사시 열해석 (Launch Stage Thermal Analysis on a Mass Varying Satellite Box by Analytical Solutions)

  • 최준민;김희경;현범석
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 추계학술대회
    • /
    • pp.163-168
    • /
    • 2003
  • Analytical approach is applied to predict temperature of satellite box under worst hot condition from fairing jettison to separation. The box is tried to solve analytically which is exposed to known environmental heating condition and has internal heating and irradiation to space. For a single thermal mass, governing equation for temperature is simplified to 1st order ordinary differential equation(ODE) by several assumptions. Two cases are considered. The one is for constant mass box and the other is for mass-varying box. Each case has three different analytical solution by sign of constant term in ODE. One analytical solution for constant mass is applied to physical launch stage condition. It is concluded that the present analytical method can be used to quick predict the temperature of a satellite box and check whether a satellite is safe against space environment during launch stage.

  • PDF

수질영향평가의 신뢰수준 향상을 위한 기상자료의 검정 (Climate Data Qualification for Water Quality Impact Assessment)

  • 이길하;조홍연
    • 환경영향평가
    • /
    • 제20권5호
    • /
    • pp.601-613
    • /
    • 2011
  • This study is focused on a climate data integrity to improve water quality assessment due to the social development projects. The study is in an attempt to calculate both extreme ranges of weather data measurements and partly provide means to assess qualification of data which fall within the extremes at the 23 meteorological weather stations. Generally speaking, maximum temperature, minimum temperature, relative humidity, dew point temperature are in the range of reasonable accuracy. However, there found some outliers of the brightness sunshine hours in Cheonan station. Also some years in Gwangju, Seoul, Wonju, Busan, and Jeju never reach to their upper limit and perhaps the calibration of the equipment is doubtful. The users need to take cautions in using the brightness sunshine hour data in preparation of water resources planning and management by estimating evapotranspiration and river discharge, and/or growth rate of the algae (phytoplankton).

주간 하늘에 노출된 평판에 의한 복사냉각 실험 (Radiant Cooling by the Plate Viewing the Daytime Sky)

  • 변기홍
    • 한국태양에너지학회 논문집
    • /
    • 제27권4호
    • /
    • pp.11-17
    • /
    • 2007
  • The purpose of this study is to check whether the plate temperature could be lower than the surrounding air by using the radiant cooling during the day time in summer at Seoul. Without an insolation shield as this experiment was performed, a few cases were found. The temperatures of the black painted plate are lower than those of the aluminium film coated plate if the following condition exist; no or small insolation over the plate, the wind velocity less than around 2 m/s, and clear sky However if there are insolation over the plate, the temperatures of the aluminium coated plate are lower than the black painted plate. Also, as the wind velocity increases, the plate temperature decreases faster. The temperature response of the small system is much faster than the large system.

가압열충격 사고에 대한 원자로 용기의 최대 허용 기준무연성천이온도 (Maximum Allowable $RT_{NDT}$ of Nuclear Reactor Vessel for Pressurized Thermal Shock Accident)

  • 정명조;박윤원;송선호
    • 전산구조공학
    • /
    • 제11권1호
    • /
    • pp.153-160
    • /
    • 1998
  • 본 연구에서는 가압열충격 사고로 소형 냉각재 상실사고를 가정하여 냉각재의 온도와 압력의 이력으로 부터 용기 벽의 온도분포를 구하고, 이로 부터 열응력과 압응력을 해석적으로 구하였다. 또 균열 선단에서의 응력강도계수와 파괴인성치를 ASME코드의 방법을 이용하여 구하였고, 이들을 시간에 따라 비교하여 균열의 진전여부를 평가하였다. 원자로 용기 벽에 존재하는 여러 형태의 균열이 견딜 수 있는 최대 기준무연성천이온도를 결정하였으며 평가 결과에 대하여 고찰하였다.

  • PDF

마그네슘 판재의 고온 물성치 실험 (Experiments for Material Properties of Magnesium Metal Sheet at Elevated Temperatures)

  • 최의근;이상욱
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.378-381
    • /
    • 2009
  • In this study, the repetitive loading-unloading tensile tests with AZ31B magnesium sheet metal have been conducted under various elevated temperatures to check out how the Young's moduli of the sheets evolve during the plastic deformation. The loading-unloading tests have been carried out at every 1% of strain increment. With the tested results, some damage parameters of magnesium sheets based on the Lemaitre's continuum damage theory could be calculated at room temperature, $100^{\circ}C$, $150^{\circ}C$, $200^{\circ}C$ and $250^{\circ}C$. It has been shown that the critical damage parameters obtained in all temperature conditions are within the range of 0.12 to 0.18.

  • PDF

라즈베리 파이를 이용한 녹조 모니터링 프로그램 설계에 관한 연구 (A Study on the Blue-green algae Monitoring Applications Design using Raspberry Pi)

  • 김경민;김태현
    • 수산해양교육연구
    • /
    • 제28권2호
    • /
    • pp.376-383
    • /
    • 2016
  • In this paper, the blue-green algae monitoring program of applying IoT(Internet of things) technologies is designed and implemented that can check out the status of the river's water quality in real time. The proposed system is to extract the image data from the camera of raspberry pi by an wireless network, and it is analyzed through the HSV color model. We measure the temperature using a DS18B20 1-wire temperature sensor. The extracted information of image data and temperature is then analyzed in C and Python programs for use with Raspberry Pi. The XML data in PHP program is made from the analyzed information and provides Web services. It also allows to refer the XML data using mobile devices.