• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.53.2-53.2
• /
• 2015

Fiber Bragg gratings (FBGs) are the most compact and reliable method of suppressing atmospheric emission lines in the infrared for ground-based telescopes. It has been proved that real FBGs based filters were able to eliminate 63 bright sky lines with minimal interline losses in 2011 (GNOSIS). Inscribing FBGs on multi-core fibers offers advantages. Compared to arrays of individual SMFs, the multi-core fiber Bragg grating (MCFBG) is greatly reduced in size, resistant to damage, simple to fabricate, and easy to taper into a photonics lantern (PRAXIS). Multi-mode fibers should be used and the number of modes has to be large enough to capture a sufficient amount of light from the telescope. However, the fiber Bragg gratings can only be inscribed in the single-mode fiber. A photonic lantern bi-directionally converts multi-mode to single-mode. The number of cores in MCFBGs corresponds to the mode. For a writing system consisting of a single ultra-violet (UV) laser and phase mask, the standard writing method is insufficient to produce uniform MCFBGs due to the spatial variations of the field at each core within the fiber. Most significant technical challenges are consequences of the side-on illumination of the fiber. Firstly, the fiber cladding acts as a cylindrical lens, narrowing the incident beam as it passes through the air-cladding interface. Consequently, cores receive reduced or zero illumination, while the focusing induces variations in the power at those that are exposed. The second effect is the shadowing of the furthest cores by the cores nearest to the light source. Due to a higher refractive index of cores than the cladding, diffraction occurs at each core-cladding interface as well as cores absorb the light. As a result, any core that is located directly behind another in the beam path is underexposed or exposed to a distorted interference pattern from what phase mask originally generates. Technologies are discussed to overcome the problems and recent experimental results are presented as well as simulation results.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.55.1-55.1
• /
• 2015

The first Korean infrared space telescope MIRIS (Milti-purpose InfraRed Imaging System) was successfully launched in November 2013, as the main payload of Korean STSAT-3 (Science and Technology Satellite-3). After initial on-orbit operation for verification, the observations have been made with MIRIS for the fluctuation of Cosmic Infrared Background and the Galactic Plane survey. For the study of near-infrared background, MIRIS completed the survey of large areas (> $10^{\circ}{\times}10^{\circ}$ around the pole regions: the north ecliptic pole (NEP), the north and south Galactic poles (NGP, SGP). We are also continuously and frequently monitoring the NEP region for the instrumental calibration and the zodiacal light study. One the other hand, the Paschen-${\alpha}$ Galactic plane survey has been carried out using two narrow-band filters (at $1.88{\mu}m$ and $1.84+1.92{\mu}m$) of MIRIS. This survey is planning to cover the whole Galactic plane with the latitude of ${\pm}3^{\circ}$, and the longitude regions of $+280^{\circ}<l<360^{\circ}$ and $0^{\circ}<l<+210^{\circ}$ have been completed (~ 80%) by February 2015. The data are still under the stage of reduction and analysis, and we present some preliminary results.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.55.2-55.2
• /
• 2015

한국천문연구원에서는 2도${\times}$2도 시야의 1.6m 광시야 망원경과 $18k{\times}18k$ 모자이크 CCD 카메라로 이루어진 관측시스템을 남반구천문대 3곳에 설치하여 24시간 모니터링 관측이 가능한 Korea Microlensing Telescope Network(KMTNet)을 구축하고 있다. 망원경 1,2,3호기는 각각 칠레 CTIO, 남아공 SAAO, 호주 SSO 관측소에 2014년말 까지 성공적으로 설치 완료하였으며, 2015년 2월 현재 칠레와 남아공에는 연구용 18k CCD 카메라, 호주에는 시험관측용 4k CCD 카메라를 부착하여 시험관측을 수행중이다. 시험관측을 통해 KMTNet 시스템에서 가장 중요한 부분인 광시야 광학계가 요구사양을 만족함을 확인하였고, 과학연구 수행에 어려움이 없을 것으로 예상한다. 우리는 시험관측을 통해 얻어진 각각의 시스템 성능을 검토하고, 관측 후 파일전송, 전처리 및 자료 배포와 더불어 안정적인 측광성능 유지를 위한 시스템 운영 및 향후 계획에 대하여 발표한다.

• Journal of Astronomy and Space Sciences
• /
• v.31 no.1
• /
• pp.83-90
• /
• 2014

The NISS onboard NEXTSat-1 is being developed by Korea astronomy and space science institute (KASI). For the study of the cosmic star formation history, the NISS performs the imaging spectroscopic observation in the near-infrared range for nearby galaxies, low background regions, star-forming regions and so on. It is designed to cover a wide field of view ($2{\times}2$ deg) and a wide wavelength range from 0.95 to $3.8{\mu}m$ by using linear variable filters. In order to reduce the thermal noise, the telescope and the infrared sensor are cooled down to 200 K and 80 K, respectively. Evading a stray light outside the field of view and making the most use of limited space, the NISS adopts the off-axis reflective optical system. The primary and the secondary mirrors, the opto-mechanical part and the mechanical structure are designed to be made of aluminum material. It reduces the degradation of optical performance due to a thermal variation. This paper presents the study on the conceptual design of the NISS.

• Journal of The Korean Astronomical Society
• /
• v.32 no.2
• /
• pp.127-136
• /
• 1999

In this study we present the study of solar active regions based on BOAO vector magnetograms and H$\alpha$ filtergrams. With the new calibration method we analyzed BOAO vector magnetograms taken from the SOFT observational system to compare with those of other observing systems. In this study it has been demonstrated that (1) our longitudinal magnetogram matches very well the corresponding Mitaka's magnetogram to the extent that the maximum correlation yields r=0.962 between our re-scaled longitudinal magnetogram and the Mitaka's magnetogram; (2) according to a comparison of our magnetograms of AR 8422 with those taken at Mitaka solar observatory their longitudinal fields are very similar to each other while transverse fields are a little different possibly due to large noise level; (3) main features seen by our longitudinal magnetograms of AR 8422 and AR 8419 and the corresponding Kitt Peak magnetograms are very similar to each other; (4) time series of our vector magnetograms and H-alpha observations of AR 8419 during its flaring (M3.1/1B) activity show that the filament eruption followed the sheared inversion line of the quadrupolar configuration of sunspots, indicating that the flare should be associated with the quadrupolar field configuration and its interaction with new filament eruption. Finally, it may be concluded that the Solar Flare Telescope at BOAO works normally and it is ready to do numerous observational and theoretical works associated with solar activities such as flares.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.68.2-68.2
• /
• 2013

Camera for QUasars in EArly uNiverse (CQUEAN) is an optical CCD camera system made by Center for Exploration of the Origin of the Universe (CEOU). CQUEAN is developed for follow-up observation of red sources such as high-redshift quasar candidates ($z{\geq}5$), gamma-ray bursts (GRB), brown dwarfs and young stellar objects. The CQUEAN is composed of a science camera with deep-depletion CCD chip which is sensitive at around $1{\mu}m$, a set of custom-made wide-band filters for detection of quasar candidates at z~5, and a guide camera. A focal reducer was developed to secure $4.8^{\prime}{\times}4.8^{\prime}$ field of view, and an in-house user software for efficient data acquisition. CQUEAN was attached to 2.1m Otto Struve Telescope in McDonald Observatory, USA, in August 2010. About 1000 quasar candidates including 3 confirmed with follow-up spectroscopy, have been observed so far, and many high-z galaxy cluster candidates, GRBs and supernovae were also observed. And monitoring of HBC 722, a young stellar object, is under way since 2011. Further enhancement of CQUEAN including the introduction of narrow-band filters is planned.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.83.1-83.1
• /
• 2013

선형비점수차를 완벽하게 제거한 비축반사경 이론을 천체 관측용 분광기의 전단 광학계 등에 응용하면 색수차가 없는 기기 제작이 가능하다. 이러한 비축 반사경은 DTM(Diamond Turning Machine)을 이용하여 알루미늄으로 만들면 제작 시간이 단축된다. 그러나 DTM을 이용해 알루미늄과 같이 무른 금속을 가공할 경우 툴마크가 발생하게 된다. 툴마크는 회절현상을 발생시키며 이러한 회절현상은 알루미늄 반사경을 이용한 광학계 개발에 제약이 된다. 툴마크는 DTM 가공 이후 연마를 통해 제거할 수 있지만 알루미늄의 무른 특성으로 인해 연마 과정에서 반사경의 형상이 변할 가능성이 크다. 이러한 알루미늄 반사경의 형상 변화를 최소화하기 위한 방법으로는 알루미늄 반사경 표면에 무전해니켈도금을 하는 것이다. 하지만 도금 과정에서 반사경의 형상이 변할 가능성이 있기 때문에 두가지 방법을 사용하여 툴마크를 제거할 계획이다. 첫 번째 방법은 DTM 가공된 알루미늄 반사경을 5 um의 무전해니켈도금 이후 연마하여 툴마크를 제거하고 반사율 증가를 위해 그 위에 다시 알루미늄 코팅을 하는 방법니다. 두 번째 방법은 100 um의 무전해니켈도금 이후 DTM 가공을 하고 다시 연마를 통해 툴마크를 제거하는 방법이다. 이번 발표에서는 툴마크를 제거하기 위한 2가지 방법의 장단점을 확인하고 툴마크를 제거한 알루미늄 반사경을 제작하기 위한 과정을 설명하였다. 본 연구에서 개발한 비축 반사경은 서울대학교 창의연구단의 광학/적외선 카메라 CQUEAN의 차세대 모델에 적용할 계획이다.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.36-36
• /
• 2013

Globular clusters (GCs) are among the oldest stellar objects in the universe and provide valuable constraints on many aspects of galaxy evolution. GC systems typically exhibit bimodal color distributions the phenomenon of which has been a major topic in the area of GC research. GC color bimodality established a paradigm where scenarios to explain its origin require two GC groups with different formation origins. The GC division, asserted mainly by photometric color bimodality so far, has been viewed as the presence of two distinct metallicity subgroups within individual galaxies. In this study, we make use of spectroscopy of GC systems associated with two giant galaxies, M31 (the Andromeda) and M87 (NGC 4486), to investigate the GC bimodality and the underlying metallicity distributions. Recent spectroscopy on the globular cluster (GC) system of M31 with unprecedented precision witnessed a clear bimodality in absorption-line index distributions of old GCs. Given that spectroscopy is a more detailed probe into stellar population than photometry; the discovery of index bimodality may point to the very existence of dual GC populations. However, here we show that the observed spectroscopic dichotomy of M31 GCs emerges due to the nonlinear nature of metallicity-to-index conversion and thus one does not necessarily have to invoke two separate GC subsystems. We present spectra of 130 old globular clusters (GCs) associated with the Virgo giant elliptical galaxy M87, obtained using the Multi-Object Spectrography (MOS) mode of Faint Object Camera and Spectrograph (FOCAS) on the Subaru telescope. M87 GCs with reliable metallicity measurements exhibit significant inflection along the color-metallicity relations, through which observed color bimodality is reproduced from a broad, unimodal metallicity distribution. Our findings lend further support to this new interpretation of the GC color bimodality, which could change much of the current thought on the formation of GC systems and their host galaxies.

• Journal of The Korean Astronomical Society
• /
• v.49 no.6
• /
• pp.255-259
• /
• 2016

We estimate the fractal dimension of the ${\rho}$ Ophiuchus Molecular Cloud Complex, associated with star forming regions. We selected a cube (${\upsilon}$, l, b) database, obtained with J = 1-0 transition lines of $^{12}CO$ and $^{13}CO$ at a resolution of 22" using a multibeam receiver system on the 14-m telescope of the Five College Radio Astronomy Observatory. Using a code developed within IRAF, we identified slice-clouds with two threshold temperatures to estimate the fractal dimension. With threshold temperatures of 2.25 K ($3{\sigma}$) and 3.75 K ($5{\sigma}$), the fractal dimension of the target cloud is estimated to be D = 1.52-1.54, where $P{\propto}A^{D/2}$, which is larger than previous results. We suggest that the sampling rate (spatial resolution) of observed data must be an important parameter when estimating the fractal dimension, and that narrower or wider dispersion around an arbitrary fit line and the intercepts at NP = 100 should be checked whether they relate to firms noise level or characteristic structure of the target cloud. This issue could be investigated by analysing several high resolution databases with different quality (low or moderate sensitivity).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.6
• /
• pp.640-646
• /
• 2008

Design procedure of corrugated horn antenna for the mm-wave frequency range is presented, and hybrid condition in horn is calculated. In this paper, corrugate profiles of horn which satisfy both transition to balanced hybrid condition and fabrication possibility under the mm-wave short wavelength are obtained. Electromagnetic fields inside horn and corrugation are derived by the cylindrical mode theory. Propagation characteristics in the horn are calculated by the mode impedance matching method with boundary conditions, and radiation fields are obtained by the Kirchhoff-Hyugen principle to the horn aperture fields. A mm-wave corrugated horn antenna which operates on $85{\sim}115GHz$ is fabricated by electric forming method. Measurements show that VSWR is under 1.3:1 over whole band and the half power beamwidth on radiation pattern 9.2, 9.16 and 9.02 degree on 85, 100 and 110 GHz are agree well with theoretical calculation.