• 제목/요약/키워드: Telecommunication Cable

검색결과 75건 처리시간 0.028초

기판 집적 도파관 기술을 이용한 위성 통신용 4분기 전력 분배기 (4-Way Power Divider Based on Substrate Integrated Waveguide for Satellite Communications)

  • 서태윤;이재욱;이택정;조춘식
    • 한국전자파학회논문지
    • /
    • 제20권8호
    • /
    • pp.721-728
    • /
    • 2009
  • 본 논문에서는 기판 집적 도파관(Substrate Integrated Waveguide: SIW) 기술을 이용한 위성통신용 전력 분배기를 제안하였다. 출력 구형 도파관의 크기를 변화시키지 않고, 가이딩 포스트의 위치를 조절하여 등분 비등분의 전력 분배 비율을 조절하였다. 또한, 방사형 도파관의 기본적인 특성과 입력부, 전력 분배의 과정을 자세히 설명하였다. 방사형 도파관의 신호 여기 방법으로 전류 프로브를 사용하여 동축 케이블로 구현하였으며, 출력부는 마이크로스트립 선로를 천이 구조를 이용하여 SMA 커넥터를 이용하였다. 설계된 4분기 전력 분배기는 등분/비등분으로 동작할 수 있으며, 설계 결과를 시뮬레이션과 제작으로 검증하였다. 등분/비등분 전력 분배기의 측정된 결과는 VSWR 2:1을 기준 대역특이 약 2.1 GHz와 3 GHz이다.

고소지역 작업현장에서 공중선 상태 진단 모듈 기반 정비 지원 장치 개발 (Development of a Diagnostic Module Based Maintenance Support Device for Fiber Optic Telecommunication Cable in Overhead Region)

  • 김희철
    • 한국전자통신학회논문지
    • /
    • 제9권4호
    • /
    • pp.469-474
    • /
    • 2014
  • 전신주에 설치된 난립 통신선로의 포설 상태를 모니터링하고, 정비용 부가정보 수단을 제공할 수 있는 현장 모니터링 지원 시스템을 개발한다. 공중선로 정비 지원을 위한 모니터링 모듈 및 정보 처리 어플리케이션을 적용 임베디드 시스템을 제작한다. 본 연구에서는 정부의 공중선 정비 종합계획에 따라 작업 안전사고 예방 지원 장치로 보급하기 위한 대도시 공중선 정비 사업에 즉시 활용하고, 고소 공사 편의 및 작업자의 정비 효율성을 제고하는데 목적을 둔다.

광섬유 접속부의 환경 변화에 따른 손실변화 연구 (A Study on the Variation of Optical Fiber Splicing Loss due to Environment)

  • 김영호;유강희
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2006년도 하계학술대회
    • /
    • pp.105-110
    • /
    • 2006
  • The most sensitive part of the installed optical cable is the optical loss variation of the splicing point according to the environmental changes. This paper presents the details of the experimental results of the external environmental changes on optical loss, such as bending, temperature variation, temperature variation after water osmosis and variation. Through the bending test of optical fiber, rapid increase of optical loss was measured within the diameter of 30mm. The result of optical loss variation within the temperature range of $-30^{\circ}C{\sim}60^{\circ}C$ is less than 0.02dB. It was confirmed that the maximum optical loss increased up to 0.2dB in case of water osmosis within the temperature range of $-40^{\circ}C{\sim}80^{\circ}C$. There is small optical loss variation of 0.01dB under the 1mm vibration test. The experimental results of this paper can be used as the reference data for the design of the optical fiber cable splicing enclosure to protect the optical loss variation due to environmental changes.

  • PDF

기포설된 광케이블 특성측정과 이 선로조건에 대한 SDH 및 DWDM 광전송장치 전송특성측정과 시뮬레이션 (Characteristic Measurement for Ready-Deployed Optical Cable and Simulation for SDH and WDM System Existing Conditions)

  • 이성원;김영범
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제1권2호
    • /
    • pp.121-138
    • /
    • 2001
  • Due to large demand for high speed and great capacity for data transfer, WDM, which uses the wavelength division multiplexing technique, is known as alternative way to satisfy those demand for its flexible network operation and management, easy network expansion with existing networks, and enhancement of efficient data transfer rate. For these reasons, a new high capacity WDM optical communication network plan was established. Therefore, the quality of currently deployed optical cables with 81.6 km in length should be assessed to ensure if high capacity WDM system could be implemented on existing optical cables. Two important characteristic parameters, Transfer Loss and PMD (Polarization Mode Dispersion), were measured to evaluate quality of existing optical cable. Transfer Loss was measured at 0.244 dB per kilometer, which is lower than the design standard value at 0.275 dB/km. The measured PMD value gave at 0.030ps/km, and it, therefore, satisfies the value recommended by ITU-T (International Telecommunication Union-T) of 0.5ps/km. In addition, the transfer characteristic for existing 2.5 Gbps and 10 Gbps system were measured and evaluated, and the results showed that error-free transfer is very much feasible. Computer simulation for DWDM system, which is likely be a future backbone network in Korea, to assess the transfer characteristic using the same condition employed for 2.5 Gbps and 10 Gbps was carried out as well. The simulation verified that a stable network operation and reliable service could be provided.

  • PDF

광통신 시공인력 실습교과과정 및 종합 실습장 조성에 관한 연구 (An optical fiber construction training curriculum and an embodiment system)

  • 김명생
    • 정보통신설비학회논문지
    • /
    • 제2권2호
    • /
    • pp.22-31
    • /
    • 2003
  • 광통신 실습교육이 대학 및 전문교육기관에서 이루어지고 있으나 실습의 내용이 각부분별로 이루어지고 있어 광통신망 구축의 전반적인 내용을 이해하기 어려웠으며, 이에 따라 광통신의 교육은 단순한 접속위주의 교육만이 이루어져 시공현장에서는 단순한 기능인력으로만 취급되어져 왔다. 따라서, 시공현장에서 광통신망에 전체적인 내용을 평가하고 설계, 감독 및 실제 융착 접속까지 전반전인 내용을 습득할 수 있는 종합 광통신 실습교육 과정 및 종합교육장이 필요로 하게 되었다. 본 연구에서는 광통신 시공인력을 위한 실습교과 과정의 필요내용과 이를 실습할 종합광통신 실습장 구현에 필요한 내용을 제시하였다.

  • PDF

4G 이동통신기반 초간편 접속 고기능 광커넥터의 구현 (Implementation of Quick fit, High Performance Outdoor Optical Connector for 4G Mobile Communication System)

  • 이영철;김철균;천승창;정우연
    • 정보통신설비학회논문지
    • /
    • 제10권3호
    • /
    • pp.110-114
    • /
    • 2011
  • The recent development of 4G mobile communication system has led to the rapid technology shift from conventional repeater systems using coaxial cable links towards new fiber optic repeater systems using fiber-optic links between the base station and the outdoor fiber optic repeater. The technical changes have brought up the increasing needs of robust optic links that can be used in harsh environments. Based on the most demanding requirements, a new outdoor optical connector employing 2-channel fiber optics, uplink and downlink, has been developed for the applications where the rugged environmental protection is essential. This paper describes the development of the new connector along with the design criteria and performance results. In summarizing, the prototype optical connectors have undergone extensive laboratory and field test, and they have shown exceptional optical and mechanical characteristics under extreme environmental conditions. The connectors have also exhibited capabilities of providing fast and easy installation while maintaining high performance fiber optic connections.

  • PDF

SIAS를 이용한 웹 기반 가동배전설비 종합 정보관리 시스템 개발에 관한 연구 (A Study on the Web-based Overall Information Management System Developement of the Overhead Distribution Facilities Using SIAS)

  • 이동엽;김동식
    • 전기학회논문지
    • /
    • 제58권5호
    • /
    • pp.898-904
    • /
    • 2009
  • The objective of the present study lies in constructing web-based GIS system providing broad range of information applicable for power/telecommunications distribution facilities through cable. Nowadays, Korea is renowned forits faste sttele communications network across the nation enjoyable for being a test-runbed by worldwide contents providers. It is not too much to say that the trend is caused by the fact that Korea utilizes the cobweb-like power transmission cables applicable for the nationwide telecommunications networking. In particular, the trend has been all the more encouraged by the governmental drive to expedite the telecommunication network by way of the established power transmission facilities deemed as publicutility. Nevertheless, few can deny that the overexcessive competition among telecommunication service providers increasingly gives rise to unauthorized, arbitrary facilitation of distribution devices, which becomes much burden in operating the normal power/telecommunications distribution facilities by a power-generating company. In this regard, the study, to cope with such problems, attempts to develop a web GIS-based information management system compatible with NDIS(New Distribution Information System), a distribution facility management system now under operation by KEPCO, making advantage of GE Energy's SIAS(Smallworld Internet Application) technology. The model provided by this study is expected to get closer into effective operation of distribution facilities along with better sharing of information among conventional telecommunications operators, while getting rid of infringed facilitation cases

철도에서 DSL 모뎀을 사용한 데이터 전송에 관한 고찰 (An investigation of data transmission scheme using DSL modem)

  • 조봉관;최규형;장석각
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2004년도 춘계학술대회 논문집
    • /
    • pp.1446-1448
    • /
    • 2004
  • Communication line used in the rail-road have different use from subscriber line in the public telecommunication. But, when an existing communication equipment is replaced, by applying new high-speed transfer technology, we can anticipate the increase of transmission rate and decrease of waiting time according to high-speed of communication line. cost reduction of infrastructure construction and maintenance/repair according to centralization of communication line and transmission equipment. In this study, the transmission scheme of several xDSL(Digital Subscriber Line) modems were compared and analyzed. The way of applying xDSL modem to the metal cable which is used in the JR(Japan Railroad) is analyzed. In addition, the result tested in railroad communication line was reviewed.

  • PDF

무인통신구(${\Phi}1000mm$)건설용 마이크로터널링 장비 개발 (Development of Microtunneling machine for Unmanned Cable-Tunnel)

  • 박정권;서명우;김정윤
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2003년도 하계학술대회
    • /
    • pp.376-378
    • /
    • 2003
  • 본 논문에서는 2002년도에 KT에서 개발한 내경 1,000mm의 무인통신구를 건설 할 수 있는 마이크로터널링 장비에 대해 소개하고자 한다. 개발된 장비는 3D 기법을 이용한 최첨단 기법을 통하여 개발되었으며, 소형 굴진기의 취약점인 장애물 돌파능력을 보완하기 위하여 막장으로 진입이 가능한 구조로 되어있다. 따라서 굴진 중 장애물에 직면했을 경우 막장을 통하여 장애물을 효과적으로 제거할 수 있으며, 이 막장 진입통로를 이용하여 면판의 비트와 롤러커터를 교체할 수 있으므로 장거리 굴진이 가능하다. 그리고 굴진작업 시 필요한 원압잭과 후방설비인 Desander, 송 배니펌프등의 주변설비를 Operating Room에서 통합관리 할 수 있는 터널링 관리시스템을 개발하여 적용함으로써 보다. 효율적인 굴진관리를 수행할 수 있는 특징을 갖고 있다. 이렇게 개발된 장비와 시스템은 시험 시공을 통해 그 성능을 확인하였으며, 여기서 그 개발 과정 및 시험 시공 결과에 대해 기술하고자 한다.

  • PDF

지중레이다와 충격반향기법에 의한 지하 통신구 터널의 라이닝 두께 추정 (Prediction of ling concrete thickness for cable tunnel by GPR and impact-echo method)

  • 김형우;한진우;최광철;강호경;박종호
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2003년도 하계학술대회
    • /
    • pp.382-384
    • /
    • 2003
  • 지하 30m 암반에 건설된 통신구 터널의 안전성을 검토하기 위하여 콘크리트 라이닝 두께를 지중레이다(Ground Penetrating Radar)와 충격반향기법(Impact-Echo Method)으로 추정하였다. 지중레이다에 의한 콘크리트 라이닝 단면의 연속적인 화상으로부터 라이닝 두께의 상대적인 변화를 파악하였으며, 라이닝 두께가 얇은 구간은 충격반향 기법에 의해 일정 간격으로 두께를 추정하였다. 터널 천장의 라이닝 두께는 31.85cm, 좌측 및 우측 측벽부의 라이닝 두께는 각각 32.45cm. 32.97cm로서 설계 값인 30cm와 비교적 잘 일치하는 것으로 파악되었다. 지중레이다와 충격반향기법을 조합한 본 방법은 터널 라이닝 콘크리트 두께를 추정하는데 있어서 매우 효율적이고 신뢰성 있는 방법으로 분석되었다.

  • PDF