• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.209-217
• /
• 2016

This study with the aim to develop a system that can be objectively measured and evaluated as a scientific support and of R&D. To this end, this study aimed at companies participating in the development of national technology transfer support program for SMEs examined the factors affecting performance. By developing metrics that meet the business objectives refer to the applicable national and international case studies and literature reviews, etc. In order to achieve the systematization of technology evaluation index, which was selected indicators. To evaluate the weight through the duality comparing selected indicators in order to take advantage of the AHP analysis conducted targeted surveys.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.6
• /
• pp.841-846
• /
• 2008

Recently the LNG(liquified natural gas) public buses have been introduced to prevent the air pollution in metropolitan areas. As the LNG temperature in fuel tank is as low as $-162^{\circ}C$. the thermal and structural effects of tank components need to be studied for safe introduction in the market. Especially the support system of LNG fuel tank in vehicle, which has connected with inside and outside of tanks, should put attention to reduce the structural stress due to cryogenic temperature and to restrict the heat flux from ambient. There are two supporting systems in the tank, that one is connected between inside and outside tanks by welding, and the other is the inserted support system which is a cylindrical SUS bar inserted in a hole of the supporting plate. In this study the temperature distribution and thermal stress of the inserted support system were evaluated by using the utility program as ANSYS. The results showed that the rate of heat transfer to inner tank through this support system was quite small due to limited contact of support bar with plate. but the thermal stress of support plate was obtained beyond the limited tensile value of SUS304. The cautious design for the support plate part, therefore, should be given to make the safe support system of LNG vehicle fuel tank.

• Journal of Information Management
• /
• v.32 no.3_4
• /
• pp.123-145
• /
• 2001

The purpose of this study is to develop technology valuation system for technology transfer, which is using and supporting knowledge information. The valuation system comprises estimation of latent business profit by supporting formatted patent and technology-products market information, analysis of contribution profit by using industrial standard and innovation step and value of technology by using a real option equation. This study suggests a successful system in order to valuate the technologies quantitatively, and to use and support knowledge information from KISTI databases or other selected internet Information.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.60-65
• /
• 2006

A vibrational model of powder transfer equipment based on the lumped parameter method was developed, in which the operating motion consists of surging, bouncing, and pitching. After decoupling the equation of motion, the vibrational excitation source of the pitching motion was removed. So the designers are able to plan the optimum design to adjust the motion trajectory of the powder transfer equipment. That is, a procedure to adjust the motion trajectory of powder transfer equipment by changing design specifications such as the installation position, the direction of the motor, the driving speed, the mass unbalance, the stiffness coefficient, and the installation position of the support spring, is presented in this paper. The powder transfer equipment manufactured according to the results of this study did not suffer fatigue destruction, since the maximum stress on the basket structure was sufficiently small.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.1
• /
• pp.165-175
• /
• 2012

Recently, accumulation of technology, transfer, absorption, and commercialization is being significantly recognized as a key factor for sustainable growth of the 21st century global economy. The government established "Technology Transfer and Commercialization Promotion Act" In order that the technology developed at public research institutions can be transferred to the private sector and commercialized; the technology developed in the private sector can be traded and commercialized. Also, the Article 14 of "Technology Transfer and Commercialization Promotion Act" is concerning technology transfer agents' registration, promotion, and support: it introduced the special status system of technology transfer agents and the government registers, manages, and supervises it. In most developed countries, the technology transfer agency is transferred to the private sector and it is referred as a technology transfer agent or technology broker. In the domestic market, despite the introduction of the above special status system and the building a various organization and transfer medium system for boosting the market's revitalization, some problems occurred; because the registration system of a technology transfer agent and legal basis and system about its following-up control fall short. For example, recently technology transfer-related performance exemption has brought the activation of technology transfer agent's registration, but there was the limit of selecting the expert above a certain level. Therefore, some countermeasures for this are urgent, In addition, through a compulsory training completion system before the technology trade agent registration is prepared, a short period of curriculum was not sufficient to provide applicants various specialized knowledge. In this research, it is considered about the reform of technology transfer agent through its comparative study in China and Korea. Some improvements are suggested for expanding the market of technology transfer commercialization, assuring the agents' service and strengthening the competitiveness.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.77-85
• /
• 2013

Objective: The aim of this study sets factors from previous research known to impact transfer effects as the independent variables, and examines their relationship with the dependent variables, near transfer effects and far transfer effects. Background: Transfer of Training refers to the application of what learners acquire knowledge and skills in training programs to their job. The ultimate goal of training is to apply what employees learn in training sessions to their workplace. In this sense, transfer of training has been a vital concern for training effectiveness. For training to be effective, trainees(learners) should be able to use what they learn in training program back on the job. Method: For this research purpose, this study conducted a survey on 170 nuclear operators in nuclear education and training center. Of these, survey result from the 167 recruits were sampled. Theoretical model of this study is based on Holton & Baldwin's(2003) distance model of transfer effects. This study sets transfer effects(near transfer, far transfer) as the main dependent variables. Meanwhile, the independent variables are trainee characteristics, training characteristics, organizational transfer climate. Each independent variable has subordinate variables. Subordinate variables of trainee characteristics are self-efficacy, motivation to learn, motivation to transfer and ability to transfer. Subordinate variables of training characteristics are training contents, ability of trainers, training design, training climate. The last Subordinate variables of organizational transfer climate are support of supervisors, support of peer, support of organization. Conclusion: As a analysis result, trainee characteristics appeared to be in effect only significant influence near far transfer of training, the effect of the far transfer of training, there is no significant. In addition, the training characteristics appeared to be having a significant influence on near and far transfer effects. Organizational transfer climate appeared to be having a significant influence on near and far transfer effects. Finally, near transfer effect appeared to be having a significant influence on far transfer effects. Application: Results of this analysis in the study to training organization and training characteristics of the transition environment effects on nuclear power institutions and operators training organization having a significant impact that says. The transfer of knowledge and technology, as well as that can be applied to a new situation in terms of education and training are important characteristics.

• Journal of Digital Convergence
• /
• v.16 no.9
• /
• pp.51-61
• /
• 2018

This The purpose of this study is to propose a Technology Transfer Commercialization Model(TTC Model) that reflects the domestic background of R&D, technology transfer and its commercialization. This study outlines the existing technology commercialization model, examines the background of domestic technology transfer, presents TTC Model, and introduces the application of this model. As a result of this study, the TTC Model suggested the role of each participant in each stage and divided into the provider-led domain and the consumer-led domain. The use of this model can be applied to a technology provider in a way that progressively reduces its role. In the case of technology users, it can be used a corporate innovation model that gradually expands leading to commercialization and profit realization. This study is meaningful in that it clarifies the roles and the level of leadership of technology transfer entities.

• The Journal of Economics, Marketing and Management
• /
• v.8 no.4
• /
• pp.1-12
• /
• 2020

Purpose- The purpose of this study is to increase the effect of public technology transfer through government R&D support to secure the competitiveness of public technology startups. The government's R&D budget in 2019 is over 20 trillion won, and there is a legitimate need to increase the performance of technology startups through such R&D results. Research design, data, and methodology- In this paper, we comprehensively analyzed the current status of public research institutes and R&D support projects suitable for founders and analyzed and presented cases of follow-up research conducted by the Institute of Science and Technology Jobs to analyze actual performance cases of R&D support institutes. Results- In this conclusion, a developmental model of public technology entrepreneurship was proposed to increase the performance of public technology commercialization with the scalability of research institutions. In order to create a public technology information system between consumers and suppliers, a Steinweiss-type technology commercialization model for public technology commercialization, and a job-creating enterprise-type linkage R&D support business model were presented to create the results of R&D support organizations. Conclusions- Through the results of this study, it is meaningful to analyze the performance cases of technology commercialization of R&D support institutions, which have not been studied so far, to build competitiveness of research institutions and to present a growth model for the spread of technology startups. This study has implications in terms of suggesting a way to build competitiveness in technology commercialization between market demanders and suppliers by linking existing public technology startups, which deviated from the simple commercialization support system, with job creation by expanding the R&D support system.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.355-364
• /
• 2010

A session transfer method, referred to as a Recipient Serving-call session control function (S-CSCF) Assured (RSA), is proposed in order to support both session mobility and consistency in IP multimedia subsystem (IMS) based next generation network (NGN). RSA session transfer simplifies a basic session transfer operation specified in [1] by using the user agent client (UAC) like characteristics of an S-CSCF. To show its efficiency, the session transfer delay and the traffic cost of RSA session transfer are investigated and compared with those of existing session transfer applications, including Assured and Consultative session transfers, by practically considering multiple session transfer failures. It is shown that RSA session transfer can further improve user experience by reducing session transfer delay as well as traffic cost than Assured and Consultative session transfers.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.1
• /
• pp.105-114
• /
• 2015

An empirical analysis study applied to evaluate the effect of critical factors for technology transfer. The research aims to suggest ways of political support in order to facilitate technological transfer and commercialization of public research institute'technology. Based on previous researches, it is determined that five critical factors which effect on technology commercialization. These critical factors are used to derive the order of priority, attribute of the success, and failure factors. The result of this research emphasized on both roles of technology introduction motivation and type of technology transfer. In order to collect data for this research, it is carried out that survey and field study toward to technology user such as manufacturing companies which have contracted with institute A. This research has a meaning in aspects of verification of previous hypothesis through scientific approach and new findings of a significant factor that motivation determines the success or failure of technology commercialization.