• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3910-3922
• /
• 2000

Current power systems are distributed geographically and operated in the form of Energy Management System(EMS)/ Supervision Control and Data Acquisition(SCADA) with the aid of computers and communications. Recently a variety of utilities have had interests in using inforrration technology to bring the efficiency and low operational costs. There is also a trend to integrdte the production, transmission, distribution and management/control of power into one and unified distributed system. To this end, Electric Power Hesearch Institute(EPRI) announced a new standard communication protocol called Inter-Control Center Protocol(ICCP).ICCP specifies the use of Manufacturing Message Specification(MMS) for services required by rccr in application layer and supports the communications between heterogeneous control centers. This paper presents the characteristics of MMS,ICCP and their relationship. Futherrnore, we implement the basic functional blocks of ICCP using MMS services under TCI/IP environments. Finally, we model a simple power system and apply the rccp protocol to this system in a window-based scheme, and finally show the operation and validation of this protocol.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2388-2398
• /
• 2017

In this study, we propose a robust face recognition system to pose variations based on automatic pose estimation. Radial basis function neural network is applied as one of the functional components of the overall face recognition system. The proposed system consists of preprocessing and recognition modules to provide a solution to pose variation and high-dimensional pattern recognition problems. In the preprocessing part, principal component analysis (PCA) and 2-dimensional 2-directional PCA ($(2D)^2$ PCA) are applied. These functional modules are useful in reducing dimensionality of the feature space. The proposed RBFNNs architecture consists of three functional modules such as condition, conclusion and inference phase realized in terms of fuzzy "if-then" rules. In the condition phase of fuzzy rules, the input space is partitioned with the use of fuzzy clustering realized by the Fuzzy C-Means (FCM) algorithm. In conclusion phase of rules, the connections (weights) are realized through four types of polynomials such as constant, linear, quadratic and modified quadratic. The coefficients of the RBFNNs model are obtained by fuzzy inference method constituting the inference phase of fuzzy rules. The essential design parameters (such as the number of nodes, and fuzzification coefficient) of the networks are optimized with the aid of Particle Swarm Optimization (PSO). Experimental results completed on standard face database -Honda/UCSD, Cambridge Head pose, and IC&CI databases demonstrate the effectiveness and efficiency of face recognition system compared with other studies.

• Journal of Korea Multimedia Society
• /
• v.2 no.4
• /
• pp.476-489
• /
• 1999

HW/SW codesign is integrated design of systems implemented using both hardware and software components. Many design tools has been developed to support this new paradigm, so far. Current codesign tools are not widely used as been expected because of variety problems - rapidly evolving technology, platform dependency, absence of standard specification method, inconsistent user interface, varying target system, different functionality In this paper, we propose a web-based distributed HW/SW codesign environment to remedy this kinds of problem. Our codesign environment has object-based 3 tier client/server architecture. It supports collaborative workspace through session service. Fully object-oriented design of user interface(OOUI) enables easy extension without change of user Interface. Furthermore it contains transaction server and security server for efficient and safe transfer of design data. To show a validity of our design, we developed prototype of web-based HW/SW codesign environment called WebCEDA. Our model of HW/SW codesign can be used for web-based generic CAD tools.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.142-150
• /
• 2014

In this paper, the performance analysis results of time/frequency synchronization and cell search algorithm are presented for aeronautical mobile airport communication systems (AeroMACS). AeroMACS is based on IEEE 802.16e mobile WiMAX standard and uses the aeronautical frequency band of 5GHz with the bandwidth of 5MHz. The simulation model of AeroMACS is designed and the performance evaluation is conducted with the various airport channel models such as apron (APR), runway (RWY), taxiway (TWY), and park (PRK). The proposed synchronization unit was designed in hardware description language (HDL) and implemented on FPGA. Also, the real-time operation was verified and evaluated using FPGA test system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.221-227
• /
• 2008

A vehicle routing problem with time constraint is one of the important problems in distribution and transportation. The service of a customer must start and finish within a given time interval. Our method is based on an improved operators of genetic algorithm and the objective is to minimize the cost of servicing the set of customers without being tardy or exceeding the capacity or travel time of the vehicles. This research shows that a proposed method based on the improved genetic search can obtain good solutions to vehicle routing problems with time constrained compared with a high degree of efficiency other heuristics. For the computational purpose, we developed a GUI-type computer program according to the proposed method and the computational results show that the proposed method is very effective on a set of standard test problems, and can be potentially useful in solving the vehicle routing problems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1408-1414
• /
• 2004

The use of flip-chip technology has many advantages over other approaches for high-density electronic packaging. ACF (anisotropic conductive film) is one of the major flip-chip technologies, which has short chip-to-chip interconnection length, high productivity, and miniaturization of package. In this study, thermal fatigue lift of ACF bonding flip-chip package has been predicted. Elastic and thermal properties of ACF were measured by using DMA and TMA. Temperature dependent nonlinear hi-thermal analysis was conducted and the result was compared with Moire interferometer experiment. Calculated displacement field was well matched with experimental result. Thermal fatigue analysis was also conducted. The maximum shear strain occurs at the outmost located bump. Shear stress-strain curve was obtained to calculate fatigue life. Fatigue model for electronic adhesives was used to predict thermal fatigue life of ACF bonding flip-chip packaging. DOE (Design of Experiment) technique was used to find important design factors. The results show that PCB CTE (Coefficient of Thermal Expansion) and elastic modulus of ACF material are important material parameters. And as important design parameters, chip width, bump pitch and bump width were chose. 2$^{nd}$ DOE was conducted to obtain RSM equation far the choose 3 design parameter. The coefficient of determination ($R^2$) for the calculated RSM equation is 0.99934. Optimum design is conducted using the RSM equation. MMFD (Modified Method for feasible Direction) algorithm is used to optimum design. The optimum value for chip width, bump pitch and bump width were 7.87mm, 430$\mu$m, and 78$\mu$m, respectively. Approximately, 1400 cycles have been expected under optimum conditions. Reliability analysis was conducted to find out guideline for control range of design parameter. Sigma value was calculated with changing standard deviation of design variable. To acquire 6 sigma level thermal fatigue reliability, the Std. Deviation of design parameter should be controlled within 3% of average value.

• Journal of Biomedical Engineering Research
• /
• v.28 no.1
• /
• pp.17-23
• /
• 2007

Long-term potentiation (LTP) of synaptic transmission is the most widely studied model for learning and memory. However its mechanisms are not clearly elucidated and are a subject for intense investigation. Previous attempts to decipher cellular mechanisms and network properties involved a current-source density analysis (CSDA) of the LTP from small animal hippocampus measured with a limited number of microelectrodes (typically <3), only revealing limited nature of spatiotemporal dynamics. Recent advancement in multi-electrode array (MEA) technology allows continuous and simultaneous recordings of LTP with more than 60 electrodes. However CSDA via the standard Laplacian transform is still limited due to its relatively high sensitivity toward noise, inability of resolving overlapped current sources and sinks, and its requirement for tissue conductivity values. In this study, we propose a new methodology for improved CSDA. Independent component analysis and its joint use (i.e., Joint-ICA) are applied to extract spatiotemporal components of LTP. The results show that ICA and Joint-ICA are capable of extracting independent spatiotemporal components of LTP generators. The ICs of LTP indicate the reversing roles of current sources and sinks which are associated with LTP.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.3
• /
• pp.139-144
• /
• 1993

Microencapsulation of acyclovir, an effective antiviral agent which acts as a specific inhibitor of herpes DNA polymerase, by carbopol-gelatin complex coacervation has been carried out to develop an oral controlled release preparation, which could improve the absorption characteristics in GI tract. After dissolving carbopol and gelatin separately in distilled water at $40^{\circ}C$, gelatin solution was mixed with carbopol solution while stirring at the same temperature. The pH of the mixture was lowered gradually by dropwise addition of 10% HCI with continuous stirring, and then, at pH 3.5, positively charged gelatin molecules were attracted to negatively charged carbopol. These coacervation processes were observed by optical microscopy during preparation. Plasma concentrations of acyclovir in rats after an oral administration of microcapsule suspension were assayed by HPLC, and pharmacokinetic parameters were calculated based on the model-independent analyses. Two standard formulations, oral solution and intravenous bolus injection, were used as references to compare the bioavailability. It has been revealed that $C_{max}$, $T_{max}$, and MRT of microcapsule suspension were greater than those of oral solution, which results in about two-fold increases in bioavailability. Therefore, in conclusion, the carbopol-gelatin microcapsule of acyclovir might be evaluated as an effective oral controlled release preparation which could increase the bioavailability of acyclovir.

• Journal of Advanced Navigation Technology
• /
• v.6 no.3
• /
• pp.203-210
• /
• 2002

In this paper, the BER performance of IEEE 802.11a OFDM WLAN system is obtained by simulation and it is shown that the proposed modified channel estimation algorithm improves the channel estimation performance of the system. The wireless channel used in channel simulation includes AWGN and delay spread channel implemented by TDL model. At first, the performance of OFDM WLAN system according to data rate and coding rate defined in standard is evaluated in AWGN channel. Then, imperfect channel estimation in indoor wireless channel is considered. After the performance of conventional channel estimation scheme using only two long training symbols is evaluated, and that of proposed modified channel estimation scheme using additional 8 short training symbol is compared with it. From the simulation results, it is shown that modified channel estimation scheme provides reduced channel estimation error and improves the channel estimation performance due to noise averaging effect with the same preamble format as defined in specification.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.10
• /
• pp.796-800
• /
• 2009

Currently, there are many software tools that can generate 3D human figure models and animations based on the advancement of computer graphics technology. However, we still have problems in interoperability of human data models in different applications because common data models do not exist. To address this issue, the Web3D Consortium and the ISO/IEC JTC1 SC24 WG6 have developed the H-Anim standard. However, H-Anim does not include human motion data formats although it defines the structure of a human figure. This research is intended to obtain interoperable human animation by defining the data for human motions in H- Anim figures. In this paper, we describe a syntactic method to define motion data for the H-Anim figure and its implementation. In addition, we describe a method of specifying motion parameters necessary for generating animations by using an arbitrary character model data set created by a general graphics tool.