• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.93-102
• /
• 2021

The analysis of the fluid flow characteristics in reactor pressure vessel is an important part of the hydraulic design of nuclear power plant, which is related to the structure design of reactor internals, the flow distribution at core inlet and the safety of nuclear power plant. The flow distribution and mixing characteristics in the pressurized reactor vessel for the 1000MWe advanced pressurized water reactor is analyzed by using Computational Fluid Dynamics (CFD) method in this study. The geometry model of the full-scaled reactor vessel is built, which includes the cold and hot legs, downcomer, lower plenum, core, upper plenum, top plenum, and is verified with some parameters in DCD. Under normal condition, it is found that the flow skirt, core plate holes and outlet pipe cause pressure loss. The maximum and minimum flow coefficient is 1.028 and 0.961 respectively, and the standard deviation is 0.019. Compared with other reactor type, it shows relatively uniform of the flow distribution at the core inlet. The coolant mixing coefficient is investigated with adding additional variables, showing that mass transfer of coolant occurs near the interface. The coolant mainly distributes in the 90° area of the corresponding core inlet, and mixes at the interface with the coolant from the adjacent cold leg. 0.1% of corresponding coolant is still distributed at the inlet of the outer-ring components, indicating wide range of mixing coefficient distribution.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.923-931
• /
• 2021

The aim of the present study is to analyze the financial performance of converted commercial bank from non-banking financial institution through a case study of Bangladesh Commerce Bank Limited as sample organization. It is observed that the bank is able to achieve a stable growth rate in total deposits, total loans and advances, and net income after tax during the period of 2015-2019. Researchers also calculated some ratio analysis and noticed that the financial position of Bangladesh Commerce Bank Limited was not so strong because bank's ROA, ROE, NIM and other ratios were below standard. Researchers used secondary data that were examined by using descriptive statistical tools and panel data regression model. Result shows that Bangladesh Commerce Bank has satisfactory operating efficiency, assets management efficiency, and gives loans to customers. In addition, the present study has tested some hypotheses regarding net income after tax, ROA and ROE with total assets, total loans, total deposits and interest income. These hypotheses have been accepted, which means there is no significant influence of the independent variable on the dependent variable. The study suggests that Bangladesh Commerce Bank Limited had the opportunities to make their financial position stronger by utilizing their good financial position and management efficiencies.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.675-684
• /
• 2021

This paper aims to analyze factors influencing earnings of workers in Vietnam using provincial-level data from 2016 to 2018. We show the important determinants of earnings of workers of more than 15 years old including working hour, labor force, life expectancy, education, regulation measured by Provincial Competitiveness Index (PCI) and especially Industry 4.0, our major depart from literature proxies by government expenditure on science and technology, number of phone lines, and number of internet users. Working hours are a typical measurement of quantity of labor supplied. Labor force represents market size from the supply side. Life expectancy measures the health of laborers, a physical quality measure of workers. PCI stands for institutional status of the locality. Two most important factors of our interest are education, representing qualification of workers, and Industry 4.0, reflecting the new working environment of workers. By estimating a robust standard error fixed-effect model, we have evidence that all factors are significant in explaining earnings of Vietnamese workers. Education and IR4.0 play an important role in earnings of workers of Vietnam. Results also provide an estimation of Vietnam's labor supply in the context of Industry 4.0. In addition, findings contribute to explain the income discrepancy among Vietnamese provinces.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_2
• /
• pp.271-278
• /
• 2022

The solar energy has been widely used to reduce the fossil fuel and prevent the environmental pollution. The renewable energy including solar heat tends to spread due to carbon neutrality for main country of the world. Targets of solar collector are usually acquisitions of hot water or hot air. Especially, air-heating collector using solar heat is known as the technology for obtaining hot air. This study aims to investigate of characteristics of thermal flow when the hot air by air-heating collector using solar heat flows inside of indoor space. The thermal flow of heating indoor space was simulated using ANSYS-CFX program and thus the behaviors of hot air in indoor space were evaluated with standard k-𝜀 turbulence model. As the results, as the inlet velocity was increased, the behaviors of hot air became simple, and temperature range of 25~75℃ had almost no effect on behavior of flow. As the inlet temperature was increased, the temperature curve of indoor space from bottom to top was changed from linear to quadratic. Furthermore, it was confirmed that inlet velocity as well as inlet temperature also should be considered to heat indoor space equally by air-heating collector using solar heat.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.4
• /
• pp.13-28
• /
• 2022

The growth of the Islamic finance sector has been well-documented. One of the most booming sectors has been Sukuk. According to several past studies, non-Islamic investors' interest in Sukuk is due, at least in part, to the diversification benefits that Sukuk provides in the context of a fixed-income portfolio. This paper compares a pair between Sukuk and Bonds in the Malaysian market issued by the same issuer to have an unbiased comparison. Using unconditional correlation methodology provides an initial examination of the relationship between the matched pairs. In addition, this paper adopts the standard GARCH-DCC approach of Engle (2002). This is a generalization of the Bollserslev (1990) GARCH model, allowing for the conditional correlation matrices to be time-varying. The findings reveal that the correlation between bonds and Sukuk is similar to that of bonds, making Sukuk a less appealing type of bond from a diversification standpoint. There are no significant differences between Sukuk and bonds. These finding questions the previously considered differences among different types of Sukuk and supports the argument that some Sukuk might not be compliant with Islamic rules and their structure, as contracts have the same risks for Sukuk holders regardless of the type of Sukuk.

• Structural Engineering and Mechanics
• /
• v.81 no.6
• /
• pp.751-767
• /
• 2022

In the hogging bending moment area, continuous composite beams are subjected to the ultimate limit state of lateral-torsional buckling (LTB), which depends on web stiffness as well as concrete slab and shear connection stiffnesses. The design of the LTB and the determination of the elastic critical moment are produced approximately, using the European Standard EN 1994-1-1:2004, for continuous composite steel beams, but is applicable only for those with a plane web steel profile. Also, and from the previous researches, the elastic critical moment of the continuous composite beams with corrugated sinusoidal web steel profiles was determined. In this paper, a finite element analysis (FEA) model was developed using the ANSYS 16 software, to determine the elastic critical moments of continuous composite steel beams with various corrugated web profiles, such as trapezoidal, zigzag, and rectangular profiles, which were evaluated against numerical data of the sinusoidal one from the literature. Ultimately, the failure load of a composite steel beam with various web profiles was predicted by studying 46 models, based on FEA modeling, and a procedure for predicting the elastic critical moment of composite beams with various web steel profiles was proposed. When compared to sinusoidal web profiles, the trapezoidal, zigzag, and rectangular web profiles required an average increase in load capacity and stiffness of 7%, 17.5%, and 28%, respectively, according to the finite element analysis. Also, the rectangular web steel profile has a greater stiffness and load capacity. In contrast, the sinusoidal web has lower values for these characteristics.

• Journal of Drive and Control
• /
• v.20 no.1
• /
• pp.34-40
• /
• 2023

The agricultural tractor ROPS test method according to OECD code 4 is a test to assess whether the driver's safety area can be secured when a tractor overturns, and reliability should be ensured. In this study, a model formula and procedure for calculating measurement uncertainty expressing reliability in the field of agricultural machinery testing were established according to the ISO/IEC Guide 98-3:2008. The characteristics of the ROPS test device were assessed and repeated tests were performed, and the were used as factors to calculate the measurement uncertainty. As a result of repeated tests, the accuracy was higher than 1.9 % in all load directions; thus, they were, applied to calculate the type A standard uncertainty. The final expanded uncertainty was calculated within the range of less than ± 7.76 kN of force and ± 6.96 mm of deformation in all load directions.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.615-621
• /
• 2023

In this study, flow analysis of single, double, and triple filter systems of cylindrical structures was performed to analyze the flow characteristics of each filter. As a result of the flow analysis of the filter system, the number of filters and the pressure drop rate tend to be proportional to each other. It was found that the area passing through the inside of the filter had almost the same pressure. The maximum pressure drop rate of the triple filter system was about 14.9% for the forward-flow and about 12.4% for the reverse-flow. It was determined that the performance of the filter was stable within 20% of the allowable pressure drop rate of the filter system, which is the standard presented to the Korea Water Technology Certification Institute(KWTCI). In the future, a study on the decompression characteristics of the filter system according to the effect of the arrangement interval and filter density of the triple filter will be conducted.

• Journal of Information Science Theory and Practice
• /
• v.11 no.3
• /
• pp.43-57
• /
• 2023

Government codes are created and utilized to streamline and standardize government administrative procedures. They are generally employed in government information systems. Because they are included in open datasets of public data, users must be able to understand them. However, information that can be used to comprehend administrative code is lost during the process of releasing data in the government system, making it difficult for data consumers to grasp the code and limiting the connection or convergence of different datasets that use the same code.This study proposes a way to employ the administrative code produced by the Korean government as a standard in a public data environment on a regular basis. Because consumers of public data are barred from accessing government systems, a means of universal access to administrative code is required. An ontology model is used to represent the administrative code's data structure and meaning, and the full administrative code is built as a knowledge graph. The knowledge graph thus created is used to assess the accuracy and connection of administrative codes in public data. The method proposed in this study has the potential to increase the quality of coded information in public data as well as data connectivity.

• Transactions of Materials Processing
• /
• v.33 no.3
• /
• pp.169-177
• /
• 2024

Recently, hydrogen energy has been widely used because of strict regulations on greenhouse gas emissions. For using the hydrogen energy, it is required to supply hydrogen through a tube trailer. However hydrogen tube trailer can have excessive load problems during transportation due to reasons such as road shape and driving method, which may lead a risk of hydrogen leakage. So it is necessary to secure a high level of safety. The purpose of this study is to evaluate structural safety for the conservative design of hydrogen tube trailer. First, finite element(FE) modeling of the designed hydrogen tube trailer was performed. After that, safety evaluation method was established through static structural simulation based on the standard GC207 conditions. In addition, effectiveness of the designed model was confirmed through the results of the structural safety evaluation. Finally, driving simulation was used to derive acceleration graph according to time, which was considered as a dynamic property for the evaluation of conservative tube trailer safety evaluation. And dynamic structural simulation was conducted as a condition for actual transportation of tube trailer by applying dynamic properties. As a results, conservative safety was evaluated through dynamic structural simulation and the safety of hydrogen tube trailer was confirmed through satisfaction of the safety rate.