• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.291-301
• /
• 2021

OPC UA at the control and field level does not provide enough performance to replace the field bus. The OPC Foundation aims for a real-time and connection-less mechanism, and has added the OPC UA publish-subscribe model, a new specification that supports broker functions such as MQTT and AMQP, as the OPC UA Part 14 standard. This paper is about a gateway for interoperability between OPC UA publisher with the addition of OPC UA Part14 standard and DDS subscribers. Raspberry Pi 4 is used for the gateway proposed in this paper, and OpenDDS, an open source, is used for DDS. OPC UA publish-subscribe module used A-Open62541 publish-subscribe module, which additionally implements functions not provided by the corresponding source based on Open62541 publish-subscribe open source.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.7-13
• /
• 2021

Recently, due to the many features and advantages of cloud computing, cloud service is being introduced to countless industries around the world at an unbelievably rapid pace. With the rapid increase in the introduction of multi-cloud based services, security vulnerabilities are increasing, and the risk of data leakage from cloud computing services are also expected to increase. Therefore, this study will propose an AWS Well-Architected based security architecture configuration method such as AWS standard security architecture, AWS shared security architecture model that can be applied for personal information security including cost effective of cloud services for better security in AWS cloud service. The AWS security architecture proposed in this study are expected to help many businesses and institutions that are hoping to establish a safe and reliable AWS cloud system.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.10
• /
• pp.105-111
• /
• 2008

To improve the stability of levee structure, it is required to use good quality fill materials, intensive management, appropriate hydraulic structure and construction of cut-off wall. In particular, the most important factor of levee construction technology is to use bed sediment for its safety. In this study, seepage model test and numerical analysis were performed based on a standard section of levee recommended in the river design standard of korea (2005). The results of test and analysis show that most of the bed soil is a sand (SP in USCS), which does not satisfy the permeability criteria for levee materials ($< k=10^{-3}cm/sec$), thus for the safety of levee it is required to adopt a stabilizing method such as good quality soil mixing, water content control.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.10
• /
• pp.251-259
• /
• 2018

This study is to understand the entrepreneurship of youth and entrepreneurship education of youth, to examine the characteristics of entrepreneurship education of youth between South Korea and United States. And entrepreneurship is also the process of creating a new organization, which is understood as a process by an individual and a group of entrepreneurs who possess qualities and abilities with social opportunities, and move them into action and practice. There is a need for a comprehensive entrepreneurial mentality training and execution center for youth. To discussion social changes between South Korea and United States. The United States uses Junior Achievement ASK model. In contrast, South Korea through systematic and proactive education development, but due to the lack of standard founding education content. Therefore, it presented the need for professional institutions for comprehensive entrepreneurship education and operation. Korea is not well organized with the lack of standard start-up education contents, so it is urgent to develop and distribute education actively. Although the United States has been leading education at the national level, foundations are conducting education more actively.

• Journal of Korean Society for Quality Management
• /
• v.51 no.4
• /
• pp.619-632
• /
• 2023

Purpose: The main function of INS (Inertial Navigation System) is to measure the position of an armed vehicle and its performance is confirmed through the positioning accuracy test of Korean Defense Standards (KDS). The current standards, however, do not provide clear test methods and the conditions for performing positioning accuracy tests. Accordingly, the purpose of this study is to develop a new method for positioning accuracy test which would be effective. Methods: In this study, a new INS positioning accuracy test method is suggested based on the analysis of test data collected through a statistical experiment known as central composite design. For the positioning accuracy experiment of K105A1, a self-propelled artillery, two factors of driving velocity and driving distance are considered. Results: Based on the analysis of experimental data, a regression model for the positioning error is fitted and the positioning accuracy test of INS is so developed to maximize the positioning error. The standard proximity rate is used as an additional test criterion to evaluate the performance level of INS. Conclusion: The proposed new positioning accuracy test for INS has the advantage of finding the nonconforming items effectively. It is also expected to be utilized for the other similar INS positioning accuracy tests.

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.2
• /
• pp.87-93
• /
• 2013

In order to study the effect of the fluid-structure interaction (FSI) on the simulation results, the external characteristics and internal flow features of a diffuser pump were analyzed with a two-way flow solid coupling method. And the static and dynamic structure analysis of the blade was also caculated with the FEA method. The steady flow field is based on Reynolds Averaged N-S equations with standard $k-{\varepsilon}$ turbulent model, the unsteady flow field is based on the large eddy simulation, and the structure response is based on elastic transient structural dynamic equation. The results showed that the effect of FSI on the head prediction based on CFD really exists. At the same radius, the van mises stress on the nodes closed shroud and hub was larger than other nodes. A large deformation region existed near inlet side at the middle of blades. The strength of impeller satisfied the strength requirement with static stress analysis based on the fourth strength theory. The dynamic stress varied periodically with the impeller rotating. It was also found that the fundamental frequency of the dynamic stress is the rotating frequency and its harmonic frequency. The frequency of maximum stress amplitude at node 1626 was 7 times of the rotating frequency. The frequency of maximum stress amplitude at node 2328 was 14 times of the rotating frequency. No matter strength failure or fatigue failure, the root of blades near shroud is the key region to analyse.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1480-1484
• /
• 2003

This paper presents the design and development of network for housing estate security system. The system can cover up to 961 houses which can be up to 1,200 meters long transfer rate of 9,600 bps. This system uses checking and warning the abnormal situation. More over this system has ability to control switch on/off the electrical equipment in the house via AC line control system. The system consists of 4 parts. The first part is a security system of each house using MCS-51 microcontroller as a central processing unit scan 32 sensors and control 8 appliances and send alarm. The MCS-51 microcontroller received control signal via telephone used DTMF circuit. The second part is distributed two levels master/slave network implementing after RS-485 serial communication standard. The protocol its base on the OSI (Open Systems Interconnection) 7 layers protocol model design focus on speed, reliability and security of data that is transferred. The network security using encrypt by DES algorithm, message sequence, time stamp checking and authentication system when user to access and when connect new device to this system. Flow control in system is Poll/Select and Stop-and-Wait method. The third part is central server that using microcomputer which its main function are storing event data into database and can check history event. The final part is internet system which users can access their own homes via the Internet. This web service is based on a combination of SOAP, HTTP and TCP/IP protocols. Messages are exchanged using XML format [6]. In order to save the number of IP address, the system uses 1 IP address for the whole village in which all homes and appliance in this village are addressed using internal identification numbers. This proposed system gives the data transfer accuracy over 99.8% and maximum polling time is 1,120 ms.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.81-94
• /
• 2015

The purpose of this study is to find ways to build a desirable risk governance to respond to these uncertainties like such as increased risk due to the rapid development of modern science and technology in S. Korea. This study is about model of risk communication with scientific technology for additional construction of nuclear power plants. This study analyzed risk communication with scientific technology through new explanatory models between approval opinions of scientific professional group and opposition opinions of the public with Kori nuclear power plant of S. Korea. And then This study investigated related system for policy promotion in the field of nuclear energy of the current S. Korea. Consequently, Governance to strengthen the negotiations on nuclear technology at the time of the interaction in risk communication have been identified and the future of policy direction of the Korean Standard Nuclear Power Plant was detected.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.7
• /
• pp.561-568
• /
• 2013

After we designed Bearingless rotor hub system for 7,000lb class helicopter, flexbeam fatigue analysis was conducted for validation of requirement life time 8,000 hours. sectional structural analysis method applying elastic beam model was used. Fatigue analysis for two sections of flexbeam which were expected to weak to fatigue damage from result of static analysis was conducted. Extension, bending and torsion stiffness of flexbeam section shape was calculated using VABS for structure analysis. S-N curve of two composite material which composed flexbeam was generated using wohler equation. Load analysis of bearingless rotor system was conducted using CAMRAD II and load analysis result was applied HELIX/FELIX standard load spectrum to generate bearingless rotor system load spectrum which was used flexbeam fatigue safe life analysis.

• Journal of Advanced Navigation Technology
• /
• v.16 no.4
• /
• pp.602-610
• /
• 2012

Ionospheric delay error, one of main error sources in GPS signal, varies with signal frequency. Dual-frequency user uses L1, L2 frequency pseudorange to estimate the ionospheric delay, and there are errors caused by pseudorange measurement noise. So, filter is usually used to smooth the measurement. Weighted hatch filter can estimate optimal smoothed pseudorange measurement. But measurement noise model is needed to use this filter. In this paper, measurement noise modeling is conducted for NDGPS reference station. Using noise modeling result, weighted hatch filter estimate smoothed pseudorange measurement and ionospheric delay. Standard deviation of ionospheric dealy error drops to one-twenty fifth of non-filtered result.