• 한국경영과학회지
• /
• 제13권1호
• /
• pp.13-13
• /
• 1988

This paper considers the sequencing problem in mixed model assembly lines with hybrid workstation types and sequence-dependent setup times. Computation time is often a critical factor in choosing a method of determining the sequence. We develop a mathematical formulation of the problem to minimize the overall length of a line, and present a tabu search technique which can provide a near optimal solution in real time. The proposed technique is compared with a genetic algorithm and a branch-and-bound method. Experimental results are reported to demonstrate the efficiency of the technique.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.375-379
• /
• 2016

A current subtraction technique with parallel operation system is proposed to remove excessive current in touch screen application. The proposed current subtraction remove the current which go into the input node of charge amplifier. The value of subtraction current is same with current when touch screen is not touched. As a result, charge amplifier output is only proportional to variation of mutual capacitor, which make dynamic rage is increased. Also, Transmitter (Tx) driving signal and subtraction driving signal are out of phase each other. Thus, noise generated in Tx is cancelled. The proposed IC is implemented in a mixed-mode 0.18-um CMOS process. Overall system is designed for touch screen panel (TSP) with 16 driving lines and 8 sensing lines. 5-V supply voltages are used in the proposed circuits. For multiple Tx driving signal, Walsh codes are used and signal frequency is 300 khz. By using proposed technique, dynamic rage is improved 36 dB.

• Journal of information and communication convergence engineering
• /
• 제5권1호
• /
• pp.64-67
• /
• 2007

IT industry strategy trend and home network security technology is presented. First, we consider the development strategy to improve next generation IT industry. Second, we have analyzed the technique for implementing home network. Last, we have analyzed the technique to security home network field.

• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.38-46
• /
• 1996

This paper discusses the feasibility of Ultrasonic Nondestructive Evaluation (UNDE) technique for sport weld quality. Ultrasonic c-scan image assisted by image processing technique was used for Nondestructive Evaluation(NDE) of spot weld quality. Ultrasonic testing results obtained were confirmed and compared by Optical Microscope and SAM(Scanning Acoustic Mircroscope) observation of the spot-weld cross section, The results show that the nugget dinameter can be successfully measured with the accuracy of 0.5mm. It was ascertained that ultrasonic c-scan technique is very effective method for the sake of the approach to the quantitative measurement of nugget diameter and the discrimination of the corona bond from nugget. Additional support for the above conclusions is provided by the results for galvanized steel. The ultrasonic results for galvanized welds generally correspond to the results for uncoated steel. Finally, it was found that the above-mentioned technique can be sufficiently applied to NDE method for securing the Quality Assurance(QA) of spot welded products in production line.

• 한국전자파학회논문지
• /
• 제11권8호
• /
• pp.1355-1362
• /
• 2000

Microstrip antennas are attractive for many applications because of their compact size, low profile, and light weight. Recently, the demand for the miniaturization of the personal communication equipment has been increasing along with the proliferation of personal communication systems. Thus, the development of small antenna has been highly demanded. In this paper, a new technique to reduce the overall dimension of a microstrip antenna with a locally non-homogeneous substrate configuration is proposed. The miniaturized microstrip antenna for a repeater system in a mobile communication cellular band(824~894 MHz) is designed with the proposed technique, and commercialized with low cost, light weight, and small size. Comparison between simulations, based on Agilent Technologies HFSS software, and measurements are provided. The proposed method will be more attractive for a light-weight, small-size, and low-cost microstrip array design. This paper also presents the bandwidth improvement technique for under-coupled microstrip patch antenna with a tuning stub.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권5호
• /
• pp.2698-2717
• /
• 2019

This paper proposes a multi-stage encryption technique to enhance the level of secrecy of image to facilitate its secured transmission through the public network. A great number of researches have been done on image secrecy. The existing image encryption techniques like visual cryptography (VC), steganography, watermarking etc. while are applied individually, usually they cannot provide unbreakable secrecy. In this paper, through combining several separate techniques, a hybrid multi-stage encryption technique is proposed which provides nearly unbreakable image secrecy, while the encryption/decryption time remains almost the same of the exiting techniques. The technique consecutively exploits VC, steganography and one time pad (OTP). At first it encrypts the input image using VC, i.e., splits the pixels of the input image into multiple shares to make it unpredictable. Then after the pixel to binary conversion within each share, the exploitation of steganography detects the least significant bits (LSBs) from each chunk within each share. At last, OTP encryption technique is applied on LSBs along with randomly generated OTP secret key to generate the ultimate cipher image. Besides, prior to sending the OTP key to the receiver, first it is converted from binary to integer and then an asymmetric cryptosystem is applied to encrypt it and thereby the key is delivered securely. Finally, the outcome, the time requirement of encryption and decryption, the security and statistical analyses of the proposed technique are evaluated and compared with existing techniques.

• Journal of Power Electronics
• /
• 제8권2호
• /
• pp.171-180
• /
• 2008

One of the major problems in electric power quality is the harmonic contents. There are several methods of indicating the quantity of harmonic contents. The most widely used measure is the total harmonic distortion (THD). Various switching techniques have been used in static converters to reduce the output harmonic content. This paper presents and compares the two harmonic optimization techniques, known as optimal minimization of the total harmonic distortion (OMTHD) technique and optimized harmonic stepped-waveform (OHSW) technique used in multi-level inverters with unequal dc sources. Both techniques are very effective and efficient for improving the quality of the inverter output voltage. First, we describe briefly the cascaded H-bridge multi-level inverter structure. Then, we present the switching algorithm for the inverter based on OHSW and OMTHD techniques. Finally, the results obtained for the two techniques are analyzed and compared. The results verify the effectiveness of the both techniques in multi-level voltage-source inverter with non-equal dc sources, clarifying the advantages of each technique.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.252-255
• /
• 2004

This paper presents a new technique to generate the 1-bit signal by decoding Pulse Width Modulation (PWM) signal to a binary file before programming onto the ROM. Since each PWM signal requires only 1-bit digital signal, PWM signal and other forms of digital signal related to multi-bit can be simply generated. The results demonstrate that using this new technique to generate the PWM signal can simplify the process and hardware complication. Moreover, the signal's data and frequency can be easily modified by programming the data onto the ROM and using the counter, respectively, which can reduce the size of the circuit and make the PCB easier.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권1호
• /
• pp.1-14
• /
• 2018

The Global Positioning System (GPS) provides more accurate positioning estimation performance by processing L1 and L2 signals simultaneously through dual frequency signal processing technology at the L-band rather than using only L1 signal. However, if anti-spoofing (AS) mode is run at the GPS, the precision (P) code in L2 signal is encrypted to Y code (or P(Y) code). Thus, dual frequency signal processing can be done only when the effect of P(Y) code is eliminated through the L2 signal processing technology. To do this, a codeless technique or semi-codeless technique that can acquire phase measurement information of L2 signal without information about W code should be employed. In this regard, this paper implements L2 signal processing technology where two typical codeless techniques and four typical semi-codeless techniques of previous studies are applied and compares their performances to discuss the optimal technique selection according to implementation environments and constraints.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.61-64
• /
• 1999

In this paper, a technique to expand the Input and Output (I/O) of the programmable logic controller (PLC) using remote I/O module is presented. The controller and the remote I/O module should have the same protocol and are interfaced through RS 485. Each remote I/O module consists of 16 digital input and 16 digital output, and the maximum of 32 remote I/O module can be linked to one controller. The remote I/O is programmed for interrupt request to controller independently. Therefore, there is no affect to the scan time of the controller. Using this technique, the PLC can be efficiently applied to the several hundred meters different control points such as the ON-OFF control fur the agriculture farm, the building automation system, a multi group of machine control.