• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.3
• /
• pp.130-137
• /
• 2023

Smart farms, which have been receiving attention as a solution to recent rural problems, refer to technologies that optimize the growing environment of crops and increase the productivity and quality of crops through efficient management. If the relationships between environmental data in smart farms are analyzed, additional productivity enhancement and crop management will be possible. In this paper, we propose a method for acquiring and analyzing nine environmental data, including temperature, humidity, CO2, soil temperature, soil moisture, insolation, soil EC, EC, and pH. Data acquisition is done through RS-485 communication between the main board and the sensor board and stored in the database after acquisition. The stored data is downloaded in Excel sheet format and analyzed through histograms, data charts, and correlation heatmaps. First, we analyze the distribution of total, day, and night data through histogram analysis, and identifiy the average, median, minimum, and maximum values by month through data chart analysis separating day and night to see how the data changes by month. Finally, we analyze the correlation of the data through a correlation heatmap analysis separating day and night. The results show a very strong positive correlation between temperature and soil temperature and soil EC and EC during the day, and a very strong positive correlation between temperature and soil temperature and soil EC and EC at night, and a strong negative correlation between temperature and soil EC.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3841-3848
• /
• 2012

The process of an analysis of alternatives(AoA) attempts to select the best and balanced solution among a set of multiple candidate solutions under the constraints of cost, schedule, performance and risk(CSPR). The traditional AoA for the acquisition of a new weapon system has usually centered on the sequence of the requirement analysis, design synthesis, and cost estimation. An improved process for AoA is developed in this paper based on a multi-objective decision-making method, which is intended to be applied in the design concept refinement and material solution analysis stage for the acquisition of naval surface ships. The presentation of the proposed AoA approach is then followed by a case study for the next generation multi-purpose training ship based on the principles of systems engineering and also using the models of the effectiveness measure, cost estimation, and risk assessments.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.423-428
• /
• 2023

In the missile actuator system, the time and position of the wings of the drive device are very important factors in the initial maneuver of the missile, and therefore, the missile actuator device must be inspected while ensuring the accuracy and real-time of motion collection data of the actuator. In this study, the difference between the design and implementation method for checking the existing actuator device and the design implementation method of the actuator device through the DAQ(Data Acquisition) device is compared, and the difference in data collection amount and real-time data collection performance is compared and tested, and the data shown through actual tests are compared. is converted into a graph, the actuator waveform is compared and analyzed, and based on the analyzed data, DAQ device inspection configuration that guarantees real-time response speed and stability during inspection of existing actuators and DAQ devices is proposed.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.122-124
• /
• 2000

As the complexity of power systems increases, especially in the case of multiple faults or incorrect operation of protective devices, fault diagnosis requires new and systematic methods to the reasoning process, which improves both its accuracy and its efficiency. Therefore this paper proposes a method of the modeling of protection systems and fault diagnosis in power systems using Fuzzy Petri Nets (FPN). The proposed method can reduce processing time and increase accuracy when compared with the traditional methods. And also this method can cover online processing of real-time data from SCADA (Supervisory Control and Data Acquisition).

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.120-123
• /
• 2003

Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts have been very important technique in scientific study and engineering, expecially for system design, manufacturing and inspection. Two camera method keeps accuracy more than double than mechanical method. In this paper, we describe the processes surface data of teeth for automatic processing, transformation that changes to coping data of possible numeric data form, and processed inlay teeth. As the result of the Inlay manufacture, which can process with high resolution, therefore we construct the automatic processing system that depends on manual.

• Smart Structures and Systems
• /
• v.12 no.3_4
• /
• pp.271-290
• /
• 2013

The acceleration information is significant for the structural health monitoring, which is the basic measurement to identify structural dynamic characteristics and structural vibration. The efficiency of the accelerometer is subsequently important for the structural health monitoring. In this paper, the distance measure matrix and the support level matrix are constructed firstly and the synthesized support level and the fusion method are given subsequently. Furthermore, the synthesized support level can be served as the determination for diagnosis on accelerometers, while the consensus data fusion method can be used to recover the acceleration information in frequency domain. The acceleration acquisition measurements from the accelerometers located on the real structure National Aquatics Center are used to be the basic simulation data here. By calculating two groups of accelerometers, the validation and stability of diagnosis and recovering on acceleration based on the data fusion are proofed in the paper.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.50-56
• /
• 2010

Military technology transition is the process of transition from the science and technology environment to systems to supply effective weapon systems and support systems to the fighters. In case of technology transition decision, immatured technologies result in increasing acquisition cost and delaying schedule toward the objective system. In this paper, we proposed a method to identify and select critical technology elements by integration relations between technologies or components, for supporting technology transition and risk management of military R&D projects.

• Science of Emotion and Sensibility
• /
• v.21 no.4
• /
• pp.63-76
• /
• 2018

The purpose of this study was to investigate the effect of contact type textile electrode structure on heart activity signal acquisition for smart healthcare. In this study, we devised six contact type textile electrodes whose electrode size and configuration were manipulated for measuring heart activity signals using computerized embroidery. We detected heart activity signals using a modified lead II and by attaching each textile electrode to the chest band in four healthy male subjects in a standing static posture. We measured the signals four times repeatedly for all types of electrodes. The heart activity signals were sampled at 1 kHz using a BIOPAC ECG100, and the detected original signals were filtered through a band-pass filter. To compare the performance of heart activity signal acquisition among the different structures of the textile electrodes, we conducted a qualitative analysis using signal waveform and size as parameters. In addition, we performed a quantitative analysis by calculating signal power ratio (SPR) of the heart activity signals obtained through each electrode. We analyzed differences in the performance of heart activity signal acquisition of the six electrodes by performing difference and post-hoc tests using nonparametric statistic methods on the calculated SPR. The results showed a significant difference both in terms of qualitative and quantitative aspects of heart activity signals among the tested contact type textile electrodes. Regarding the configurations of the contact type textile electrodes, the three-dimensionally inflated electrode (3DIE) was found to obtain better quality signals than the flat electrode. However, regarding the electrode size, no significant difference was found in performance of heart signal acquisition for the three electrode sizes. These results suggest that the configuration method (flat/3DIE), which is one of the two requirements of a contact type textile electrode structure for heart activity signal acquisition, has a critical effect on the performance of heart activity signal acquisition for wearable healthcare. Based on the results of this study, we plan to develop a smart clothing technology that can monitor high-quality heart activity without time and space constraints by implementing a clothing platform integrated with the textile electrode and developing a performance improvement plan.

• Journal of Korean Society for Quality Management
• /
• v.41 no.3
• /
• pp.475-486
• /
• 2013

Purpose: In this study, we propose the evaluation criteria and method for selecting intensive management items which, in order to improve the parts management.1) Methods: Parts management such as MIL-STD-3018, SD-19, SD-22 is used for devising the proposed evaluation criteria and method of selecting intensive management items. Especially, proposed evaluation criteria is customized by using AHP method. Results: We approved the importance of evaluation criteria for selecting intensive management items using AHP method. In production step, the parts problem record, the parts reliability, the supplier reliability, DMSM S1). In development step, the parts problem record, a counterfeit, the parts reliability, MTTF2). Conclusion: The evaluation criteria and method for selecting intensive management items which is applicable to the domestic weapon acquisition environment is proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4108-4114
• /
• 2015

An image acquisition by using an optical mirror is called as a catadioptric method. The catadioptric imaging method is generally used for acquisition of 360-degree all directional visual information in an image. An exemplar omnidirectional optical mirror is the bowl-shaped hyperbolic mirror. In this paper, a single camera omnidirectional stereo imaging method is studied with an additional concave lens. It is possible to obtain 3 dimensional coordinates of environmental objects from the omnidirectional stereo image by matching the stereo image having different view points. The omnidirectional stereo imaging system in this paper is cost-effective and relatively easy for correspondence matching because of consistent camera intrinsic parameters in the stereo image. The parameters of the imaging system are extracted through 3-step calibration and the performance for 3-dimensional coordinates reconstruction is verified through experiments in this paper. Measurable range of the proposed imaging system is also presented by depth-resolution analysis.