• 융합정보논문지
• /
• 제8권5호
• /
• pp.229-236
• /
• 2018

과거 기술사업화는 학계 및 연구계 중심으로 기술이전 또는 창업지원 등 좁은 의미로 해석되어 시행되었으며, 기술 사업화 단계에서 사업의 경험부족, 기술개발 실패, 판로 미확보 등이 실패원인으로 지적되어 왔다. 본 논문에서는 학계 연구소 보유기술의 직접사업화 지원 사업이 공공 자금 및 대기업 영업력을 기반으로, 사업화 기술과 자본, 판로, 정부정책 및 지원 등이 결합한 신개념의 기술사업화 모델을 제시하고, 보유기술을 직접사업화하기 위한 애로요인을 도출하였으며, 조사 및 분석을 통해 기술사업화 수행 주체의 요구요인과 보유역량과의 사이에 차이가 있고, 요구요인과 애로요인간에 상관관계가 있다는 유의미한 결론에 도달하였다. 이 결론을 기반으로, 대학 및 연구기관 보유기술에 대한 사업화의 효율성을 높이기 위한 일환으로 지원정책 개선 방안을 도출하였다.

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.460-469
• /
• 2010

To develop coal gasfication system, many studies have been actively conducted to describe the simulation of steady state. Now, it is necessary to study the gasification system not only in steady state but also in dynamic state to elucidate abnormal condition such as start-up, shut-down, disturbance, and develop control logic. In this study, a model was proposed with process simulation in dynamic state being conducted using a chemical process simulation tool, where a heat and mass transfer model in the gasifier is incorporated, The proposed model was verified by comparison of the results of the simulation with those available from NETL (National Energy Technology Laboratory) report under steady state condition. The simulation results were that the coal gas efficiency was 80.7%, gas thermal efficiency was 95.4%, which indicated the error was under 1 %. Also, the compositions of syngas were similar to those of the NETL report. Controlled variables of the proposed model was verified by increasing oxygen flow rate to gasifier in order to validate the dynamic state of the system. As a result, trends of major process variables were resonable when oxygen flow rate increased by 5% from the steady state value. Coal flow rate to gasifier and quench gas flow rate were increased, and flow rate of liquid slag was also increased. The proposed model in this study is able to be used for the prediction of gasification of various coals and dynamic analysis of coal gasification.

• 한국융합학회논문지
• /
• 제9권4호
• /
• pp.223-232
• /
• 2018

최근 각 대학교에서는 극심한 취업난 해소를 위해 학문 간 융합 교육을 통한 취업과 창업지원에 많은 노력을 기울이고 있다. 본 연구에서는 한국과 중국 대학생들의 취업역량이 기업가정신과 창업 의지에 미치는 영향에 대해 국적 조절 효과를 구조방정식 모형으로 실증 분석하였다. 연구 결과 첫째, 취업역량이 취업뿐만 아니라 기업가정신에 유의한 영향을 미치는 것으로 나타났다. 둘째, 취업역량만으로는 창업 의지에 직접 어떠한 영향을 미치지 못하고 기업가정신을 매개로 창업 의지에 영향을 미치는 것으로 나타났다. 마지막으로 국적에 따라 기업가정신과 창업 의지가 부분적으로 달라지는 결과를 도출하였다. 연구 결과를 바탕으로 취업과 창업에 효과적인 융합기술 교육과정 개발을 위한 기초 자료로 활용할 수 있으며, 향후보다 많은 국가를 대상으로 연구하여 확대 적용할 수 있을 것이다.

• 산업경영시스템학회지
• /
• 제37권3호
• /
• pp.75-81
• /
• 2014

To establish a new creative economy, the worldwide efforts have been made to wriggle out the old economic paradigm after the financial crisis of 2008. When it comes to the limitation of the viability. the start up companies have a high risk of failure. Therefore business incubator (BI) should carry out the role to improve their viability. As for the maximization of the effect on the business incubating services as move in companies, it is important for BI to increase the level of business incubating services by the systemic and scientific measurement. This study showed that the quality of the BI center services was measured by Kano analysis and the previous research as follows. First, BI quality attribute by Timko's customer satisfaction came out into the attractive qualities on the 14 items that amount to the 70% of 20 business incubating services items. It is desirable to perform the strategy for the satisfaction. Secondly, basic business incubating services were interpreted as the one-dimensional quality like incubating spaces, parking facilities, security facilities, industry technology development funds, and incubating managers. Finally, training and educational service was recognized as indifferent quality. Futhermore, the improvement and the limitation of this study as well as the interpretation of analysis results are also provided.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.92-97
• /
• 2007

This study was carried out to minimize the lifting force and to design the slim sized frame of a height adjustment mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment as well as to achieve much slimmer frame for the pedestal. A tolerance analysis of 6 sigma was applied to achieve smooth lift at design stage not to change the tolerance specification of gap several times in a roller type of lifting mechanism at mass production stage. The specification of minimum gap and the target of production yield ratio were agreed with a quality team before tooling. A DFSS simulation on drawings had been done with reasonable tolerance and achievable standard deviation(${\sigma}$) several times until the target specification of gap and yield ratio was met. Once tolerance and deviation(${\sigma}$) were fixed tooling start was done successfully. A CAE method was applied to achieve a slim design. Design parameters were frozen when those parameters matched the reference strength data of standard model. Through those tolerance analysis and CAE simulation the number of tool modification was reduced and production yield ratio was raised up without arguing quality specification at production stage in the end.

• 전력전자학회논문지
• /
• 제18권1호
• /
• pp.45-53
• /
• 2013

Fuel cell power system is one of the most promising energy source for the alternative energy because it has unique advantages such as high energy density, no power drop during operation, and feasible to make compact size. However, due to very low response time, fuel cell is difficult to correspond to drastic load changes and start-up operation. For solving these problem, fuel cell power system must include energy storage device such as Li-Poly battery or super capacitor. Therefore, bi-directional DC-DC converter must be required for this storage device and fuel cell-PCS control. This paper presents a design and modeling of the bi-directional DC/DC converter. Firstly, we present modeling the boost and buck mode of the bi-directional converter through both PWM switch model and state space averaging technique. Secondly, in order to minimize output ripple and transient response overshoot, we have two identical DC-DC converters interleaved and adopt two-loop voltage-current controller. The proposed bi-directional DC-DC converter's modeling method and control design have been verified with computer simulation and experimentation.

• Asia pacific journal of information systems
• /
• 제20권1호
• /
• pp.127-140
• /
• 2010

The benefit that a consumer derives from the use of a good often depends on the number of other consumers purchasing the same goods or other compatible items. This property, which is known as network externality, is significant in many IT related industries. Over the past few decades, network externalities have been recognized in the context of physical networks such as the telephone and railroad industries. Today, as many products are provided as a form of system that consists of compatible components, the appreciation of network externality is becoming increasingly important. Network externalities have been extensively studied among economists who have been seeking to explain new phenomena resulting from rapid advancements in ICT (Information and Communication Technology). As a result of these efforts, a new body of theories for 'New Economy' has been proposed. The theoretical bottom-line argument of such theories is that technologies subject to network effects exhibit multiple equilibriums and will finally lock into a monopoly with one standard cornering the entire market. They emphasize that such "tippiness" is a typical characteristic in such networked markets, describing that multiple incompatible technologies rarely coexist and that the switch to a single, leading standard occurs suddenly. Moreover, it is argued that this standardization process is path dependent, and the ultimate outcome is unpredictable. With incomplete information about other actors' preferences, there can be excess inertia, as consumers only moderately favor the change, and hence are themselves insufficiently motivated to start the bandwagon rolling, but would get on it once it did start to roll. This startup problem can prevent the adoption of any standard at all, even if it is preferred by everyone. Conversely, excess momentum is another possible outcome, for example, if a sponsoring firm uses low prices during early periods of diffusion. The aim of this paper is to analyze the dynamics of the adoption process in markets exhibiting network effects by focusing on two factors; switching and agent heterogeneity. Switching is an important factor that should be considered in analyzing the adoption process. An agent's switching invokes switching by other adopters, which brings about a positive feedback process that can significantly complicate the adoption process. Agent heterogeneity also plays a important role in shaping the early development of the adoption process, which has a significant impact on the later development of the process. The effects of these two factors are analyzed by developing an agent-based simulation model. ABM is a computer-based simulation methodology that can offer many advantages over traditional analytical approaches. The model is designed such that agents have diverse preferences regarding technology and are allowed to switch their previous choice. The simulation results showed that the adoption processes in a market exhibiting networks effects are significantly affected by the distribution of agents and the occurrence of switching. In particular, it is found that both weak heterogeneity and strong network effects cause agents to start to switch early and this plays a role of expediting the emergence of 'lock-in.' When network effects are strong, agents are easily affected by changes in early market shares. This causes agents to switch earlier and in turn speeds up the market's tipping. The same effect is found in the case of highly homogeneous agents. When agents are highly homogeneous, the market starts to tip toward one technology rapidly, and its choice is not always consistent with the populations' initial inclination. Increased volatility and faster lock-in increase the possibility that the market will reach an unexpected outcome. The primary contribution of this study is the elucidation of the role of parameters characterizing the market in the development of the lock-in process, and identification of conditions where such unexpected outcomes happen.

• Structural Engineering and Mechanics
• /
• 제50권5호
• /
• pp.635-652
• /
• 2014

Creep and shrinkage behaviour of an ultra lightweight cement composite (ULCC) up to 450 days was evaluated in comparison with those of a normal weight aggregate concrete (NWAC) and a lightweight aggregate concrete (LWAC) with similar 28-day compressive strength. The ULCC is characterized by low density < 1500 $kg/m^3$ and high compressive strength about 60 MPa. Autogenous shrinkage increased rapidly in the ULCC at early-age and almost 95% occurred prior to the start of creep test at 28 days. Hence, majority of shrinkage of the ULCC during creep test was drying shrinkage. Total shrinkage of the ULCC during the 450-day creep test was the lowest compared to the NWAC and LWAC. However, corresponding total creep in the ULCC was the highest with high proportion attributed to basic creep (${\geq}$ ~90%) and limited drying creep. The high creep of the ULCC is likely due to its low elastic modulus. Specific creep of the ULCC was similar to that of the NWAC, but more than 80% higher than the LWAC. Creep coefficient of the ULCC was about 47% lower than that of the NWAC but about 18% higher than that of the LWAC. Among five creep models evaluated which tend to over-estimate the creep coefficient of the ULCC, EC2 model gives acceptable prediction within +25% deviations. The EC2 model may be used as a first approximate for the creep of ULCC in the designs of steel-concrete composites or sandwich structures in the absence of other relevant creep data.

• 경영과정보연구
• /
• 제28권4호
• /
• pp.27-44
• /
• 2009

이 기술의 가치는 얼마나 될 것인가? 이는 다양한 투자환경 하에서 관심과 중요성이 매우 큰 질문이다. 이러한 환경은 R&D 프로젝트에 투자를 고려하고 있는 기업들은 물론 신생기업에 투자를 고려하고 있는 벤처투자자에 이르기까지 매우 다양하다. 그러나 객관적이고 정확한 가치평가는 매우 어려우며, 적절한 평가를 수행하지 못할 가능성도 매우 높다. 이러한 문제에 닥친 경영자의 의사결정을 돕기 위한 가치평가 기법으로서 전통적인 할인현금흐름(DCF) 분석방법으로부터 실물옵션 방법까지 다양하게 제시되어있다. 특히 DCF 기반의 기술가치평가, 이른바 소득접근법(Income Approach)의 적용을 위한 주요 핵심변수를 추정하기 위한 구조화 작업이 이루어져왔다. 본고에서는 기술가치평가에 대한 선행연구를 기술의 가치분석 또는 가치평가의 이론적 접근, 기술가치 분석 평가 모델과 기법을 개발하거나 모델적용을 위한 기술가치의 결정요인을 구조화하기 위한 연구, 기술가치평가에 대한 사례분석과 실증적 분석 측면에서 검토한다. 다양한 가치평가 방법들은 자체적인 특성을 가지고 있으며, 그에 따른 실제 적용에 한계를 가지고 있다. 본고에서는 가치평가 기법의 실용성을 검토하고, DCF 모델이 가진 한계를 극복하기 위한 하이브리드 모델의 적용 가능성을 탐색하고자 한다. 이를 통해 현장의 경영자들이 이들 기법의 추상적인 아이디어를 더욱 용이하게 접근하여 사용할 수 있도록 하고자 한다.

• 경영정보학연구
• /
• 제18권1호
• /
• pp.157-175
• /
• 2016

시장 경제 자본주의 체제 하에서 부의 불평등, 재분배 기능의 한계, 자본의 흐름에 따른 비효율적 과대생산과 과대소비, 인간 존엄성과 자유의 제한 등의 한계점이 드러나고 있다. 이러한 한계를 조정하기 위하여 새로운 공생의 가치 마련이 요구되고 있으며, 개별 기업 단위에서도 사회적 책임과 공유가치에 대한 요구가 강조되고 있다. 기업의 사적 영리와 사회적 가치를 동시에 추구하고자 하는 사회적 경제 또는 사회적 기업의 형태가 사회공유 가치창출의 대안으로 제시되어, 그 가능성과 영역을 확대하고 있다. 기술적인 면에서 인터넷과 스마트폰을 비롯한 모바일 단말기의 급속한 보급은 대중 참여의 공유경제 확산을 가능하게 만들고 있다. 정보통신 플랫폼과 빅테이터 분석과 같은 초고속 네트워크 통신 및 대용량 데이터 처리 기술의 발달은 개인 대 개인, 기업 대 개인 간의 소통이 실시간으로 가능하게 함으로써 광범위한 수요자와 공급자를 연결해 주어 공유 시장을 확대함에 큰 역할을 하고 있다. 이 논문에서는 지역 협력적 소비를 바탕으로 정보통신기술(Information & Communication Technology)을 활용하여 자전거 관련 공유경제 시스템을 구축, 사회적 기업으로 창업한 (주)푸른바이크쉐어링의 사례를 살펴본다. 푸른바이크쉐어링은 공유, 공생, 공헌의 사회적 책임을 사업 모형 속에 접목하여, 지역 내의 다양한 협력 주체들과의 협업을 통한 사회적 기업을 운영하고 있다. 사례 분석을 통하여, 사회적 기업의 지속가능성을 추구하는 핵심적 요인으로 지역 사회 네트워크 활용이 가능하며, 사회적 기업과 공유경제의 융합 사업 모형을 통해 사회적 기업의 한계를 극복할 수 있는 대안이 될 수 있음을 검토하였다. 또한 정보통신기술의 발달에 따른 기술적 환경 변화가 어떻게 공유경제 시스템에 효과적으로 적용될 수 있는지를 보이고자 하였다. 선행적 이론 정리를 위하여, 사회적 기업의 개념과 현황, 기업의 사회적 책임에 대한 선행 연구의 내용을 살피고, 공유경제의 개념과 특징, 기업의 공유가치 확대에 대한 이론을 정리하였다.