• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.1122-1130
• /
• 2016

This paper presents a novel approach for achieving both a tight DC voltage regulation and a power factor control by applying the Reaching Law Sliding Mode Control (RL-SMC) and the conventional Sliding Mode Control (SMC). Applying these strategies on a matrix rectifier (MR) can achieve a unity grid side power factor when the DC load changes widely and it can provide a ripple-free output voltage that is easily affected by distortions of the three-phase ac voltage supply. Furthermore, by employing the reaching law on the SMC can solve the chatting problem of the sliding motion. Comparative Matlab simulations and experimental verifications for these strategies have been presented and discussed in this paper. The results show that by applying the SMC and RL-SMC on a MR can achieve a unity grid side power factor and a regulated ripple-free DC output.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1807-1811
• /
• 2004

Supercritical fluid chromatography (SFC) was considered for separating racemic ibuprofen. The chromatographic column (3.9 ${\times}$ 150 mm) was packed with Kromasil$^{\circledR}$ CHI-TBB, and the mobile phase was supercritical carbon dioxide with modifier of IPA. The experimental variables were the content of IPA, and temperature and pressure of supercritical mobile phase. To determine the separation condition, the empirical equation of retention factor and resolution was proposed. In the case of retention factor, the empirical equation was in the form, $k\;=\;a{\rho}\;+b/F\;+\;c\;({\rho}/F)\;+\;d$. The empirical equation for resolution was proposed as a linear form, $R\;=\;a{\rho}\;+\;bF\;+\;c$.

• Journal of Environmental Science International
• /
• v.23 no.4
• /
• pp.615-623
• /
• 2014

The groundwater level varies according to the characteristics and composite materials of aquifer. In this study, specific yield and reaction factor which are the major two hydrogeological parameters in the WTF(Water Table Fluctuation) method were estimated and analyzed spatial characteristics. 8 groundwater level stations which have enough measuring period and high correlation with rainfall in the Hancheon watershed were used. The results showed that specific yield was randomly distributed and reaction factor showed inverse trend with altitude. If the enough data were collected, reaction factor according to altitude in ungauged points could be estimated by using these parameter characteristics.

• Corrosion Science and Technology
• /
• v.8 no.6
• /
• pp.243-250
• /
• 2009

When a steel sheet pipe applied to marine environment, an anti-corrosive coating should be treated to obtain long-term life-time for steels, especially, splash zone. Although anti-corrosive property of coatings is required to be tested in real marine environment, it is difficult because of long test time such as 20 years or more time. Therefore, we used cyclic corrosion tester in a laboratory, which has similar conditions with salt-dry-wet process such as real marine environment. Anti-corrosive properties of the coatings and two steels were tested their anti-corrosive properties under cyclic corrosion test conditions(KS D ISO 14993) and the results were compared with estimate life-time in real marine environment. According to cyclic corrosion test, accelerated corrosive factor of each anti-corrosive coating was investigated accelerated corrosive factor from impedance with EIS method. Accelerated corrosive factor of type SS400 carbon steel and A690 was also investigated their accelerated corrosive factor from the regression curves of weigh loss results. One of the anti-corrosive coatings showed about 50 years life-time compared with standard sample life-time. Carbon steel SS400 showed from 0.1 mm/yr to 0.06 mm/yr as its corrosion rate.

• Knowledge Management Research
• /
• v.6 no.2
• /
• pp.105-118
• /
• 2005

The future will see all industries become technology-driven in the competitive global market place. Firms with deep technological roots and innovation strategies have some advantages. Business valuation of technology is critical to the future of firm's business. In this situation widely used scoring valuation is not enough to evaluate relative business competitiveness associated with technology and to assign its relative ranking category. Therefore, a more useful and comprehensive new valuation approach, which is called business composite index, is needed to complement and to enhance the existing scoring valuation approach. In this research, statistical factor analysis is applied to determine the common factors and to estimate associated weights. And business composite index, which is a kind of weighted scoring method, is derived based on the results of factor analysis. This research shows that business composite index is considered very useful to measure the business relative strength of individual technology and also to assign its relative ranking category instead of absolute ranking based on scoring valuation approach.

• Culinary science and hospitality research
• /
• v.13 no.1 s.32
• /
• pp.166-178
• /
• 2007

A review of literature relating to the research topic and a survey method have been implemented in order to analyze effects of service orientation. For data analysis, a reliability analysis was performed to test the reliability of the construct and a series of an exploratory factor analysis was used for the validity test. The findings of the study were as follows: Classified into sex, service leadership factor and service skill factor showed meaningful difference between groups. Classified with age, service training factor, service leadership factor, service standardization factor, service technology factor, and service compensation factor showed meaningful difference between groups. Classified with scholarship, service compensation factor showed meaningful difference. Classified into working year, employees' discretion factor showed meaningful difference. Classified into work department, service training factor and employees' right factor showed meaningful difference. In addition, classified into monthly average incomes, employees' discretion factor showed meaningful difference.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2283-2286
• /
• 2003

This paper presents conservation of electrical energy in building with harmonics analysis and compensation which occur in electrical system. We use load controlling and management system in order to adjust load factor of system.The maximum demand limiting and controlling are used ,then the system can acquire the prediction and compare it to the maximum demand set point.The electrical signal analysis based on FFT technique. The harmonics are compensated by using harmonic filters.This system consists computer which works as controller, processor , analysis and database unit together with digital power meter in form of multidrop network through serial communication via RS-485.The load control system uses PLC to control load via serial communication RS-485. The A/D converter is used for sampling the electrical signals via parallel port of computer.The harmonic filters are controlled by a computer.The data of measurement such as voltage, current, power, power factor, total harmonic distortion, energy, etc., can be saved as database and analysis. The load factor is adjusted by limiting and controlling maximum demand. The load factor adjustment can reduce the cost of electric consumption and energy generation together with harmonics compensation in order to increase high efficiency of electrical system.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.79-85
• /
• 2016

In this study, we proposed a new single-stage small power MH lamp electronic ballast and power-factor correction circuit with improved circuit by the current of passive power factor correction. Main circuit integrates traditional DC/DC and DC/AC circuits into one-stage DC/AC inverter. Moreover, we described the working principle and control strategy of the new circuit; it's soft switching principle; and resonant element parameter design formula. An experimental prototype of HID lamp electronic ballast with output power of 70 W was built to verify the feasibility of the analysis and design. The simulation and experimental results proved that the power factor of this circuit could reach 94%, with efficiency of 90%. The input current harmonics conform to IEC 61000-3-2 standards and its cost is low. These superior performances of the new circuit indicate certain practical values.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.171-192
• /
• 2017

The change of any element in the network is possible to cause performance degradation of the multicast network. So it is necessary to optimize the topology path through the multicast update strategy, which directly affects the performance and user experience of the overlay multicast. In view of the above, a new multicast tree update strategy based on perturbation theory Musp (Multicast Update Strategy based on Perturbation theory) is proposed, which reduces the data transmission interruption caused by the multicast tree update and improves user experiences. According to the multicast tree's elements performance and the topology structure, the Musp strategy defines the multicast metric matrix and based on the matrix perturbation theory it also defines the multicast fluctuation factor. Besides it also demonstrates the calculability of the multicast fluctuation factor presents the steps of the Musp algorithm and calculates the complexity. The experimental results show that compared with other update strategies, as for the sensitivity of the multicast fluctuation factor's energized multicast tree to the network disturbance, the maximum delay of the Musp update strategy is minimal in the case of the local degradation of network performance.

• Geomechanics and Engineering
• /
• v.1 no.1
• /
• pp.85-96
• /
• 2009

The radius and coordinate of sliding circle are taken as searching variables in slope stability analysis. Genetic algorithm is applied for searching for critical factor of safety. In order to search for critical factor of safety in slope stability analysis efficiently and in a robust manner, some improvements for simple genetic algorithm are proposed. Taking the advantages of efficiency of neighbor-search of the simulated annealing and the robustness of genetic algorithm, a hybrid optimization method is presented. The numerical computation shows that the procedure can determine the minimal factor of safety and be applied to slopes with any geometry, layering, pore pressure and external load distribution. The comparisons demonstrate that the genetic algorithm provides a same solution when compared with elasto-plastic finite element program.