• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1342-1347
• /
• 2016

• International Journal of Advanced Culture Technology
• /
• v.7 no.1
• /
• pp.150-154
• /
• 2019

The purpose of this research is to identify major factors that influence the cognition the elderly in community. There was a significant correlation between the cognitive and visual perceptual skills of the elderly. The subject's cognitive skill was statistically higher for males by gender, for lower age group, and for higher level of education.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.58-62
• /
• 2017

In this paper, we studied the structural design for safety improvement of the winch mount of the armored recovery vehicle. From the finite element analysis using the safety factor of the original winch mount, the results determined that the safety factor was very low, namely 1.14 at $-15^{\circ}$ when towing the maximum force. For considering the usage and safety, the safety factor needs to increase to between 1.4 and 1.6. To improve the safety factor, a re-design, such as shape modification and strengthening the welded zone, was performed. After the improvement of the structural design, the safety factor of the improved mount was calculated at 1.78, an increase of about 56.1% from that of the original mount.

• Journal of Power Electronics
• /
• v.11 no.1
• /
• pp.37-44
• /
• 2011

In this paper, a four-phase 8/6-pole 4-kW SR motor drive model is presented. Based on experimental data, the model allows an accurate simulation of a drive in dynamic operation. Simulations are performed and a laboratory type set-up is built based on a TI TMS320F2812 platform to experimentally verify the theoretical results obtained for a SR motor. To reduce acoustic noise and to correct the power factor of this drive, a two-stage power converter is proposed that uses a current source rectifier (CSR) as the input stage for the asymmetrical converter of the studied SRM. Employing the space-vector modulation (SVM) method in matrix converters, the CSR switching allows the dc link's capacitors to be eliminated and the power factor of the SRM drive to be improved. As the electrical motive force (emf) is directly proportional to the rotor speed, the input voltage to the machine can be programmed to be a function of the speed with the modulation index of the CSR, leading to a reduction in the acoustic noise of the SRM drive. Simulation of the whole SRM drive system is performed using MATLAB-Simulink. The results fully comply with the required conditions such as power factor correction with an improvement in the THD.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.11
• /
• pp.1-10
• /
• 2021

This paper compares the performance of Fama-French three-factor and five-factor models using a dataset of 20 Pakistani commercial banks for the period 2011 to 2020. We focus on an emerging economy as the findings from earlier studies on developed countries cannot be generalized in emerging markets. For empirical analysis, twelve portfolios were developed based on size, market capitalization, investment strategy, and growth. Subsequently, we constructed five Fama-French factors namely, R_M, SMB, HML, RMW, and CMA. The OLS regression technique with robust standard errors was applied to compare the predictive power of both the Fama-French models. Further, we also compared the mean-variance efficiency of the Fama-French models through the GRS test. Our empirical analysis provides three unique and interesting findings. First, both asset pricing models have similar predictive power to explain the expected portfolio returns in most cases. Second, our results from the GRS test suggest that there is no noticeable difference in the mean-variance efficiency of one asset pricing model over the other. Third, we find that all factors of both Fama-French models are statistically significant and are important for explaining the volatility of expected commercial bank returns in the context of Pakistan.

• Current Optics and Photonics
• /
• v.5 no.1
• /
• pp.8-15
• /
• 2021

An elliptical zone plate (EZP) array is important in off-axis optical systems because it provides two advantages. First, the residual beam and the main source are not focused in the same direction and second, the light from the observation plane is not reflected back towards the beam source. However, the fill factor of the previous EZP array was about 76% which was a little low. Hence, this EZP array could not collect the maximum amount of illumination light, which affected the overall optical performance of the lens array. In this study, we propose a new EZP array design with a 97.5% fill factor used in off-axis imaging system for enhancement of brightness and contrast. Then, direct laser lithography was used to fabricate the high fill factor EZP array by moving the XY linear stage of the system in a zigzag motion. The imaging properties of the proposed EZP array were experimentally verified at the focal plane and compared with the previous model.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.2
• /
• pp.281-292
• /
• 2017

It is demanded to promote research and development of cyber weapons system and core technology in response to the ongoing cyber attack of North Korea. In this paper, core technologies of the future cyber weapon system are developed and the factors affecting the realization timing of core technologies were analyzed. 9 core technology groups and 36 core technologies are derived. Afterwards, these core technology groups are compared to the operation phase of the joint cyber warfare guideline and the cyber kill chain of Lockheed Martin. As a result of the comparison, it is confirmed that the core technology groups cover all phases of the aforementioned tactics. The results of regression analyses performed on the degree of influence by each factor regarding the moment of core technology realization show that the moment of core technology realization approaches more quickly as factors such as technology level of the most advanced country, technology level of South Korea, technology transfer possibility from the military sector to the non-military sector(spin-off factor), and technology transfer possibility from the non-military sector to the military sector(spin-on factor) increase. On the contrary, the moment of core technology realization is delayed as the degree at which the advanced countries keep their core technologies from transferring decrease. The results also confirm that the moment of core technology realization is not significantly correlated to the economic ripple effect factor. This study is meaningful in that it extract core technologies of cyber weapon system in accordance with revision of force development directive and join cyber warfare guideline, which incorporated cyber weapon system into formal weapon system. Furthermore, the study is significant because it indicates the influential factor of the moment of core technology realization.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.169-178
• /
• 2000

The 4-point bending tests have been performed In order to estimate the effect of TIG-dressing on fatigue strength and fatigue characteristics quantitatively for non load-carrying fillet welded joints subjected to pure bending. As a result of fatigue tests, fatigue strengths of as-welded specimens have satisfied the grade of fatigue strength prescribed in specifications of korea, AASHTO and JSSC. Fatigue strength at 2 million cycles of TIG-dressing specimens have increased compared with as-welded specimens. As the result of beachmark tests, fatigue cracks occurred at several points, where the radius of curvature and flank angle in the weld bead toes were low, and grew as semi-elliptical cracks, then approached to fracture. As a result of finite element analysis, stress concentration factor in weld bead toes has closely related to the flank angle and radius of curvature, and between these, the radius of curvature has more largely affected in stress concentration factor than flank angle. As a result of fracture mechanics approaches, the crack correction factor of test specimens has largely affected on stress gradient correction factor in case a/t is below 0.4. From the relations between stress intensity factor range estimated from FEM analysis and fatigue crack growth rate, fatigue life has been correctly calculated.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.2
• /
• pp.26-33
• /
• 2007

This study was to investigate the reaction analysis of citizen on fence removal for securing green space. The results are as following; The majority of users went to green space more than one time per week to take a walk, rest and stayed there less than an hour. The places, where the fence removal was required mostly, were public institutions, parks and schools. The physical factor was the highest influence on whether the fence removal project could be expanded or not. With a slight difference from the physical factor, the environmental and emotional factor followed after. The social factor was also significant at 1 % level. In the physical aspect, the increase of garbage littering was the most negative part after fence removal.When the citizens were asked if they would participate in the fence removal project, the environmental and emotional factor and the social factor were the most influential ones on work places while the environmental and emotional factor influenced only on private houses.

• Nuclear Engineering and Technology
• /
• v.49 no.4
• /
• pp.838-849
• /
• 2017

This paper proposes penalty factor equations that take into consideration the weld strength over-match given in the classified form similar to the revised equations presented in the Code Case N-779 via cyclic elastic-plastic finite element analysis. It was found that the $K_e$ analysis data reflecting elastic follow-up can be consolidated by normalizing the primary-plus-secondary stress intensity ranges excluding the nonlinear thermal stress intensity component, $S_n$ to over-match degree of yield strength, $M_F$. For the effect of over-match on $K_n{\times}K_{\nu}$, dispersion of the $K_n{\times}K_{\nu}$ analysis data can be sharply reduced by dividing total stress intensity range, excluding local thermal stresses, $S_{p-lt}$ by $M_F$. Finally, the proposed equations were applied to the weld between the safe end and the piping of a pressurizer surge nozzle in pressurized water reactors in order to calculate a cumulative usage factor. The cumulative usage factor was then compared with those derived by the previous $K_e$ factor equations. The result shows that application of the proposed equations can significantly reduce conservatism of fatigue assessment using the previous $K_e$ factor equations.