• Nuclear Engineering and Technology
• /
• v.21 no.3
• /
• pp.171-185
• /
• 1989

On the basis of equal health hazard risk, economic assessment of nuclear was compared with that of coal for the expansion planning of electric power generation in the year 2000. In comparing health risks, the risk of coal was roughly ten times higher than that of nuclear according to various previous risk assessments of energy system. The zero risk condition can never be achievable. Therefore, only excess relative health risk of coal over nuclear was considered as social cost. The social cost of health risk was estimated by calculation of mortality and morbidity costs. Mortality cost was ＄250,000 and morbidity cost was ＄90,000 in the year 2000.(1986US＄) Through Cost/Benefit Analysis, the optimal emission standards of coal-fired power generation were predicted. These were obtained at the point of least social cost for power generation. In the year 2000, the optimal emission standard of SOx was analyzed as 165ppm for coal-fired power plants in Korea. From this assessment, economic comparison of nuclear and coal in the year 2000 showed that nuclear would be more economical than coal, whereas uncertainty of future power generation cost of nuclear would be larger than that of coal.

• Clean Technology
• /
• v.16 no.3
• /
• pp.182-190
• /
• 2010

The feasibility of clean technology to minimize the $CO_2$ emission by recycling and reuse the waste materials and energy have been studied for the cement industry. A life cycle assessment (LCA) was performed for an alternative raw material-supply method to use the molted slag as the major raw material in the cement clinker manufacturing. Using this new method, a 60% of $CO_2$ could be reduced that comes out during the decarboxylation from the cement rotary kiln. The energy-efficiency improvement and the alternative energy methods that had been determined in our previous study through the environmental assessment of cement industry were applied to the study for the reduction of $CO_2$ emission. The natural gas, one of the fossil fuels, was also used as the first choice to get the result at the earliest time by the most economic and the most efficient green technology and to switch into the carbon neutral energy consumption pattern.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.685-693
• /
• 2021

This study examined the fire risk of the region in Goyang City using the spatial information data of buildings. The economic damage by industry was assessed according to the probability of fire risk. The study area was confined to Goyang-si, Gyeonggi-do, and the same fire risk reduction rate was applied to each region for the convenience of analysis. The possibility of fire was derived based on the buildings' density and usage in the area by National GIS building-integrated information standard data. The calculation of economic damage by industry in Goyang City due to the fire risk was calculated by combining the Goyang-si industry-related model produced by matching with 30 industrial categories in Input-Output Statistics of Korea Bank and 20 industrial categories in the Goyang-si business survey and the possibility of fire. The basic scenario of production impossibility during six months and business loss due to fire was established and analyzed based on the supply model. The analysis showed that Ilsan-dong-gu, Ilsan-seo-gu, and Deokyang-gu suffered the most economic damage. The "electricity, gas, steam, and water business" showed the greatest loss by industry.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1643-1653
• /
• 2021

This study is to investigate the effect of beauty lifestyle on the quality of life of middle-aged women. For this study, 417 middle-aged women aged 35-65 years living in Seoul, Gyeonggi, Gwangju, Sejong, and Daejeon were conducted from February 27, 2021 to March 14, 2021. As a result of this study, the correlation of quality of life of middle-aged women according to beauty lifestyle was positively correlated in the order of show-off type, appearance-seeking type, practicality-seeking type, and fashion-seeking type. In addition, it was found that the practical pursuit of beauty lifestyle and the pursuit of show-off affect the quality of life of middle-aged women. Therefore, it is necessary to develop customized communication information and marketing strategies for beauty products based on the ambivalent perspective that pursues economic efficiency and luxury for the practical and flaunting types that can have a positive impact on the quality of life of middle-aged women.

• Proceedings of the Technology Innovation Conference
• /
• 2004.06a
• /
• pp.151-169
• /
• 2004

Studies on compensation structures of international technology licensing show that the level of intellectual property protection in the host market and the favorableness of the host country's economic environment are positively related to the use of running royalty-based compensation structure. Lump-sum fee or fixed royalty compensation is more likely to be used in the introduction and decline stages of the technology life cycle, and running royalty compensation in the growth stage. The international experience and the size of the licensor company are positively related to the use of running royalty. In this theoretical context, this paper analyzes the compensation structures of technology import in Korea. The paper uses the officially reported data to analyze the compensation structures. It analyzes the characteristics of the compensation structures in terms of fixed royalty and running royalty by licensor country, group of licensor countries and size of licensee companies.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.733-741
• /
• 2021

Globally, in accordance with the goals set forth in the 2015 Paris Climate Agreement, each country has established and declared a reduction target for carbon neutrality by 2050. The roadmaps for establishing long-term greenhouse gas emissions development strategies and setting reduction targets have been announced. As the international community accelerates the transition to the net-zero society, 128 countries have declared net-zero by the end of 2020, and the net-zero declaration continues to expand around G20 member states. In December 2020, Korea announced the "2050 Net-zero Strategy" to establish a foundation for simultaneously achieving carbon reduction, economic growth, and improved quality of life for the people through active response to the net-zero, and pursuing policy tasks in stages to do this. Comprehensive carbon management is insufficient due to the lack of comprehensive carbon management due to the departure from the areas of mandatory reduction, such as the GHG energy target management system and the GHG emissions trading offset system implemented to reduce greenhouse gases in Korea. Currently, there is no cases for estimation or calculation of carbon dioxide emissions for the Mine Reclamation projects. It is reviewed the standard methods proposed by domestic and foreign carbon emission calculation methods and proposed appropriate carbon emission estimation methods for the Mine Reclamation projects in this study.

• Journal of Technologic Dentistry
• /
• v.39 no.3
• /
• pp.187-196
• /
• 2017

Purpose: The purpose of this study was to investigate the factors contributing to temporomandibular joint disorder symptoms. Methods: The survey was conducted from May 1 to June 10 2017 against college students(120 males and 123 females) in Daejeon and Gangwon who understood the purpose of this study and agreed to participate. Results: First, The most frequent symptom of temporomandibular joint disorders is noises from the joint (male 45%, female 61.8%), followed by headache or neck pain (male 25.8%, female 52.8%). There was shown a significant difference by gender in all items except for jaw dropping, poor alignment of teeth and trauma(p<0.05). Second, Looking into the correlation between stress and subjective symptoms of Temporomandibular joint disorders, The stress of Temporomandibular joint disorders showed more significant relation with realistic issues such as academic task, economic burden (e.g., treatment cost), future career, and life values rather than aspect of social relationship(p<0.01). Conclusion: As a result of analyzing variables to understand the influence of stress on temporomandibular joint disorders, the accumulated number of bad habits, stress and temporomandibular joint disorders showed a significantly positive correlation with one another (p<0.05). In other words, the higher the stress level the severe the temporomandibular joint disorders; the more the bad habits the severe the temporomandibular joint disorders;

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.7
• /
• pp.131-143
• /
• 2023

In the future knowledge society, the importance of business data is expected to increase, and it is recognized as a raw material for companies to manufacture product or develop service. As the importance of data increases, methods to calculate the economic value of database assets is being studied. There are many studies to evaluate the value of database assets, but the characteristics of database assets are not fully reflected. In this study, we classified database assets into revenue-type, non-revenue-type, and public-type database assets by considering the characteristics of database assets. In addition, focusing on the fact that revenue-type database assets can be valued similarly to existing technology valuation, we developed a method for calculating the life of database assets that includes risk-adjusted discount rate.

• Resources Recycling
• /
• v.25 no.6
• /
• pp.13-22
• /
• 2016

This study is aimed at compare and evaluate the environmental impact of End-of-Life Vehicle(ELV) on the eco-friendly technology dismantling and recycling system, using Life Cycle Assessment (LCA) method. In this study, it was analyzed for the environmental impacts of raw materials, disassemble process, recycle parts separation and waste treatment into the process of ELV treatment by greenhouse gas and resource consumption, etc. Through this study, the indoor rail type dismantling technology were recycling rate applied on the alternate system was increased by approximately 8%. As a result, it was 3 to 88% by improving the environmental impact category. In addition, the added benefit of approximately 8 - 62% in pre-market occurred through the recycling rate, improve parts reuse rate of ELV. Through the results of this study, legal compliance, improved reuse and recycling ratio, used parts market reach, enable exports has identified the need for the effort that the dissemination and diffusion of eco-friendly technology.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.1
• /
• pp.93-102
• /
• 2010

Greening sometimes fails because its method is not suitable for various site conditions, therefore the trend of selecting a revegetation method in Korea today is through test construction. However, due to enlargement, complication and diversification of domestic construction businesses, the importance of VE is gradually increasing as effective efforts over a whole life-cycle to obtain goals such as quality improvement and cost reduction, and not only quality and economic efficiency but also substantiality need to be considered in comparing revegetation methods. For this study, Sungnam~Janghowon (area1), where comparatively various slope revegetation methods are used, was selected the investigation site. The site was divided into three areas:blasting rock, ripping rock and earth sand. The revegetation methods used were six in the blasting rock area, five in the ripping rock area, and two in the earth sand region. 2007 monitoring data was analyzed, and Value (V) was calculated with LCC related ratio, and compared and contrasted with the evaluation of prior revegetation methods. Therefore it is believed that this analysis enables selection of the most appropriate method, unbiased towards one particular characteristic such as quality, vegetation growth and economy. When aiming for a durable effect, it shall be more efficient to select the most appropriate method focusing on LCC analysis, which deals with the economic aspect, as well as the design function aspect.