• Animal Bioscience
• /
• v.37 no.6
• /
• pp.1001-1006
• /
• 2024

Objective: This study aimed to investigate the effect of Codonopsis pilosula polysaccharide (CPP) on the motility, mitochondrial integrity, acrosome integrity rate, and antioxidant ability of sheep sperm after preservation at 4℃. Methods: Semen from healthy adult rams were collected and divided into four groups with separate addition of 0, 200, 400, and 1,000 mg/L CPP. Sperm motility was analyzed using the Computer-Assisted Semen Analysis software after preservation at 4℃ for 24, 72, 120, and 168 h. Sperm acrosome integrity rate was analyzed by Giemsa staining at 24, 72, and 120 h, and mitochondrial membrane integrity was analyzed by Mito-Tracker Red CMXRos. The total antioxidant capacity (T-AOC) and malondialdehyde (MDA) content of spermatozoa were measured after 120 h of preservation. Results: The sperm viability and forward-moving sperm under 200 mg/L CPP were significantly higher than that in the control group at 72 h (61.28%±3.89% vs 52.83%±0.70%, 51.53%±4.06% vs 42.84%±1.14%), and 168 h (47.21%±0.85% vs 41.43%±0.37%, 38.68%±0.87% vs 31.68%±0.89%). The percentage of fast-moving sperm (15.03%±1.10% vs 11.39%±1.03%) and slow-moving sperm (23.63%±0.76% vs 20.29%±1.11%) in the 200 mg/L group was significantly higher than control group at 168 h. The mitochondrial membrane integrity of the sperm in the group with 200 mg/L CPP was significantly higher than those in the control group after storage at 4℃ for 120 h (74.76%±2.54% vs 65.67%±4.51%, p<0.05). The acrosome integrity rate in the group with 200 mg/L (87.66%±1.26%) and 400 mg/L (84.00%±2.95%) was significantly higher than those in the control group (80.65%±0.16%) after storage for 24 h (p<0.05). CPP also increased T-AOC and decreased the MDA concentration after preservation at 4℃ (p<0.05). Conclusion: Adding CPP could improve the T-AOC of sperm, inhibit lipid peroxidation, and facilitate semen preservation.

• Korean Journal of Organic Agriculture
• /
• v.26 no.2
• /
• pp.173-180
• /
• 2018

This study was conducted to investigate farmers' satisfaction in organic farming technologies developed by the Rural Development Administration (RDA). The survey targeted farmers who were eco-friendly or interested in eco-friendly agriculture. 70% of the target farmers were doing eco-friendly farming, and the satisfaction rate of the technology developed by the RDA was 3.85 points. The satisfaction of the farmers who participated in demonstration and demonstration of the farming field of the developed technology was 4.00 and the satisfaction level of organic farming instruction manual was 3.95. In addition, 38.4% of the surveyed areas were found to be pest control areas, and the impacts on the satisfaction of the organic cultivation related technology utilization and the satisfaction of the organic cultivation guide were analyzed. As a result, the RDA needs to develop and supply customized technology for aged small farmers.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.479-482
• /
• 2008

Since late of 2000, KIER has developed a novel pyrolysis process for production of fuel oils from polymer wastes. It could have been possible due to large-scale funding of the Resource Recycling R&D Center. The target was to develop an uncatalyzed, continuous and automatic process producing oils that can be used as a fuel for small-scale industrial boilers. The process development has proceeded in three stages bench-scale unit, pilot plant and demonstration plant. As a result, the demonstration plant having capacity of 3,000 tons/year has been constructed and is currently under test operation for optimization of operation conditions. The process consisted of four parts ; feeding system, cracking reactor, refining system and others. Raw materials were pretreated via shredding and classifying to remove minerals, water, etc. There were 3 kind of products, oils(80%), gas(15%), carbonic residue(5%). The main products i.e. oils were gasoline and diesel. The calorific value of gas has been found to be about 18,000kcal/$m^3$ which is similar to petroleum gas and shows that it could be used as a process fuel. Key technologies adopted in the process are 1) Recirculation of feed for rapid melting and enhancement of fluidity for automatic control of system, 2) Tubular reactor specially-designed for heavy heat flux and prevention of coking, 3)Recirculation of heavy fraction for prevention of wax formation, and 4) continuous removal & re-reaction of sludge for high yield of main product (oil) and minimization of residue. The advantages of the process are full automation, continuous operation, no requirement of catalyst, minimization of coking and sludge problems, maximizing the product(fuel oil) yield and purity, low initial investment and operation costs and environment- friendly process. In this presentation, background of pyrolysis technology development, the details of KIER pyrolysis process flow, key technologies and the performances of the process will be discussed in detail.

• Journal of Information Technology Services
• /
• v.22 no.5
• /
• pp.109-124
• /
• 2023

This study aims to apply the concept of regulatory stringency to the regulatory sandbox with a fresh perspective. The regulatory sandbox is a system that gives opportunities under certain conditions to new technologies or businesses that have not been launched due to inadequacy or insufficiency in legal systems. Previous research on regulatory sandboxes has mainly focused on discussions about their impact on specific technologies or business domains. This study attention to the results according to the evaluations. Among them, whether special cases for demonstration can evolve into official permission has garnered significant attention. For this study, among the cases that passed the regulatory sandbox evaluation from February, 2019, to December, 2022, 162 cases in the field of ICT convergence were selected. The evaluation results were classified into three groups 'positive interpretation (Fast Track)', 'temporary permission', and 'special case for demonstration.' Each case was assigned to one of the three groups. Through the comparative analysis, the common characteristics and differences were summarized. Then, this study explored improvement measures to pass a less restrictive regulatory sandbox. The analysis of the cases revealed that the differences in each evaluation result were attributed to variations in the technological characteristics and user protection features. Considering these differences, as well as the higher weight and importance of the preparation stage for sandbox application, this study suggested a three-step approach to prepare for temporary permission and positive interpretation rather than special case for demonstration. In addition, this thesis discussed the policy limitations of the regulatory sandbox mechanism in South Korea and the limitations of the current study. Hopefully, the results of this study would be beneficial to individuals and companies, particularly venture companies and startups seeking to develop new technologies or businesses and utilize regulatory sandboxes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.157-165
• /
• 2017

Intelligent transportation systems are currently being developed for elemental technology development of cooperative intelligent transport systems, which enable vehicles to communicate with each other or reduce the risk of traffic accidents, We have been defining and standardizing services according to the purpose of solving traffic safety problems depending on countries. Therefore, in this study, the developed countries of V2X(vehicle-to-everything) based on USA, Europe, Japan, etc., analyzed the service cases selected in the field demonstration stage after completion of the element technology devanalyzed the service cases selected in the field demonstration stage after completion of the element technology development, and to suggest the direction of futureelopment, and to suggest the direction of future policy direction.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1996.11a
• /
• pp.39-49
• /
• 1996

Hundreds of contaminated sites have been generated due to the past mismagement of toxic substances, the lack of adequate environmental controls and ignorance of the potential environmental impacts of general activities in Canada. The general public, industry and governments have been addressing the contaminated sites with a number of cleanup responses. Environmental protection and remediation have become top priorities for the public and private sectors alike in Canada. Between the late 1980s and the early 1990s, the Canadian Environmental Protection Act and Canada's Green Plan were followed by provincial and territorial laws and policies to regulate contaminated sites. The National Contaminated Site Remediation Program(NCSRP) was initiated in 1989. It has been administered through bilateral agreements between the federal and participating provincial/territorial governments. They have committed a total of $250 million toward orphan site cleanup and technology development/demonstration over a five year period. The federal government has committed an additional $25 million to assess contaminated sites on federal crown land. Over 40 orphan high-risk contaminated sites, over 230 federal sites and over 35 technology development/demonstration projects have been addressed. The Canadian Council of Ministers of the Environment has developed a series of guidance documents to ensure a consistent and successful implementation of the Program. The management/regulation scheme of contaminated sites generally consists of： 1) identifying and investigating sites, 2) determining site contamination, 3) recognizing responsibility and liability, 4) assessing priority for remediation, 5) activation, evaluation and implementing remediation options, and 6) documenting remediation completion. The NCSRP supported the successful development/demonstration of a wide range of innovative remedial technologies. They are related to stabilization/solidification, thermal washing/flushing, advanced oxidation, sonics, and groundwater contaminated with hydrocarbons, PAHS, PCBs, heavy metals, and other hazardous pollutants in a variety of site environments.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.207-208
• /
• 2022

Recently, with the development of digital technology, new research cases which applied new technology were increased. Also, the related equipment and services are being developed in the industry. Before new equipment is developed and released, it must go through a verification process. In the maritime industry, equipment is verified through simulation tests or environmental tests on land. However, if only the test on land is conducted, verification data in the actual operating environment might be insufficient. In this paper, considerations are described in the development of an onboard demonstration scenario for verification in the operating environment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1438-1441
• /
• 2003

The project for "Development of Advanced Spent Fuel Management Technology" has a plan of a demonstration for the Advanced Management Process in the hot cell of IMEF. The Advanced Management Process are being developed for efficient and safe management of spent fuels. For the demonstration, several devices which are used to safely transport and handle nuclear materials without scattering have been derived by analyzing the Advanced Management Process, object nuclear material and modules of process equipment and performing graphical simulation of transportation/handling by computers. For verification, powder transportation vessel and handling device have been designed and manufactured. And several tests such as transporting, grappling, rotating the vessel have been performed. Also, the design requirements of transportation/handling equipment have been analyzed based on test results and process studies. The developed design requirements in this research will be used as the design data for the Advanced Management Process.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.91-94
• /
• 2003

A field pilot-scale demonstration of an enhanced SVE using hot air injection and extraction was conducted to remove diesel range compounds from subsurface soils at a site in J-city, Korea. The objective of demonstration was to evaluate field ISR by intrinsic microorganism after an application study of hot air-SVE technology and to calculate each first-order kinetic with soil temperature. TPH concentration of contaminated soil at the site was approximately 2, 000~11, 000 mg/kg (average 6, 900 mg/kg) with depths greater than 5 m bgs. The 1st-order reaction rate constants, k were 0.0438(@about5$0^{\circ}C$), 0.0564(@4$0^{\circ}C$), and 0.0685(@33$^{\circ}C$) d-1 respectively.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.156-161
• /
• 2004

The application of solar energy, in the field of alternative energy, was on the increase tendency. In the case of advanced nations, through continuous R&D, solar hot water heater with high efficiency has been used for the house and the industrial process on business, advanced nations were reached up the experimental stage of solar generation system. But, the actual circumstance of the domestic has been not accomplished the popularization of solar hot water heater and the settlement of it which is the fundamental stage of the solar energy usage. This trouble, the domestic was flooded with small enterprise for producing solar hot water heater, was caused by the popularization and the production without verification of performance. To supply the monitoring program for evaluating solar hot water heater, this research was purpose to improve the technical development of the enterprise for producing solar-heat hot-water-boiler and served as an aid for the enlargement and the popularization on solar energy.