• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.6
• /
• pp.285-292
• /
• 2017

There are technological, operational and environmental constraints at tactical edge, which are disconnected operation, intermittent connectivity, and limited bandwidth (DIL), size, weight and power (SWaP) limitations, ad-hoc and mobile network, and so on. To overcome these limitations and constraints, we use service-oriented architecture (SOA) based technologies. In our research, we propose a hierarchical mission service model that supports service-oriented mission planning and execution in order for a commander to operate various SW required for mission in battlefield environment. We will also implement development tools that utilize the workflow technology and semantic capability-based recommendation and apply them to combat mission scenarios to demonstrate effectiveness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.304-307
• /
• 2002

High speed machining was accomplished. through the technological advances which covers the whole field of mechanical industry. But tapping have many troubles because of its complicate cutting mechanism, for example. tool damage, chip elimination and synchronization between spindle rotation and feed motion. But High speed tapping is so important that it marches in step with the flow of the times and make improvement in the productivity. In this paper we analyze mechanism of high speed synchronized tapping with the signal of tapping torque and spindle speed obtained through the newly developed high speed tapping machine(NTT-30B). We made an experiment with this machine on condition of various speed from 1000rpm to 10000rpm. As one complete thread is performed through the whole chamfer cutting, cutting torque increases highly in chamfer cutting, but smoothly in full thread cutting functioning of the threads guide. And the size of cutting torque according to spindle speed(rpm) was not enough of a difference to be conspicuous.

• Journal of the Korean Society for Library and Information Science
• /
• v.36 no.1
• /
• pp.165-186
• /
• 2002

The collection management paradigm has drastically changed since the emergence of collection management activities on the internet. Due to the technological development of web, web has become the newly open field as a useful tool to facilitate collection management transactions. The purpose of this study is, by evaluating web sites of the university library’s collection management in United States, to construct the contents of collection management web site. To fulfill the purpose, 6 categories for the contents of the collection management web site are suggested. The result of this study can be used as the basic data for researching of collection management web site. Web site is playing a role of stepping up its activities and informing useful information on its selection tool and collection development policy.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.216-222
• /
• 2021

Advances in technology have given educators a tool to empower them to assist with developing the best possible human resources. Teachers at universities prefer to use more modern technological advances to help them educate their students. This opens up a necessity to research the capabilities of cloud-based learning services so that educational solutions can be found among the available options. Based on that, this essay looks at models and levels of deployment for the e-learning cloud architecture in the education system. A project involving educators explores whether gement Systems (LMS) can function well in a collaborative remote learning environment. The study was performed on how Blackboard was being used by a public institution and included research on cloud computing. This test examined how Blackboard Learn performs as a teaching tool and featured 60 participants. It is evident from the completed research that computers are beneficial to student education, especially in improving how schools administer lessons. Convenient tools for processing educational content are included as well as effective organizational strategies for educational processes and better ways to monitor and manage knowledge. In addition, this project's conclusions help highlight the advantages of rolling out cloud-based e-learning in higher educational institutions, which are responsible for creating the integrated educational product. The study showed that a shift to cloud computing can bring progress to educational material and substantial improvement to student academic outcomes, which is related to the increased use of better learning tools and methods.

• KOMUNHWA
• /
• no.63
• /
• pp.65-82
• /
• 2004

The most typical period of Upper Paleolithic age in Korea is related with a blade tool culture and a microblade culture. Recently, we can figure out that there were a typical blade tool culture of Korea by being discovered to Goreari site and Jingnel site

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.4
• /
• pp.593-599
• /
• 2012

Objective: This study aims to implement a non-contact gesture-based interface for presentation purposes and to analyze the effect of the proposed interface as information transfer assisted device. Background: Recently, research on control device using gesture recognition or speech recognition is being conducted with rapid technological growth in UI/UX area and appearance of smart service products which requires a new human-machine interface. However, few quantitative researches on practical effects of the new interface type have been done relatively, while activities on system implementation are very popular. Method: The system presented in this study is implemented with KINECT$^{(R)}$ sensor offered by Microsoft Corporation. To investigate whether the proposed system is effective as a presentation support tool or not, we conduct experiments by giving several lectures to 40 participants in both a traditional lecture room(keyboard-based presentation control) and a non-contact gesture-based lecture room(KINECT-based presentation control), evaluating their interests and immersion based on contents of the lecture and lecturing methods, and analyzing their understanding about contents of the lecture. Result: We check that whether the gesture-based presentation system can play effective role as presentation supporting tools or not depending on the level of difficulty of contents using ANOVA. Conclusion: We check that a non-contact gesture-based interface is a meaningful tool as a sportive device when delivering easy and simple information. However, the effect can vary with the contents and the level of difficulty of information provided. Application: The results presented in this paper might help to design a new human-machine(computer) interface for communication support tools.

• The Korean Journal of Pain
• /
• v.25 no.3
• /
• pp.143-150
• /
• 2012

Spinal cord stimulation has become a widely used and efficient alternative for the management of refractory chronic pain that is unresponsive to conservative therapies. Technological improvements have been considerable and the current neuromodulation devices are both extremely sophisticated and reliable in obtaining good results for various clinical situations of chronic pain, such as failed back surgery syndrome, complex regional pain syndrome, ischemic and coronary artery disease. This technique is likely to possess a savings in costs compared with alternative therapy strategies despite its high initial cost. Spinal cord stimulation continues to be a valuable tool in the treatment of chronic disabling pain.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1631-1634
• /
• 1997

Since surgery is usually a difficult task because of physiological tremor, eye strain, and tremor, contagious and radioactive hazard, it is necessary to develop micro-surgery telerobotic system using improved tools suitable for their specific tasks. Nowadays the growth of interest on microsurgery and medical applications of robotics has been so rapid. But the medical robots are only practical applications of the industrial robots. This paper identifies five general areas of advanced microsurgery based on the current technological background and expertise, and analyzes the motion, tool and accuracy with respect to microsurgery task, and proposed the criteria to evaluate micro-surgical manipulator. The analysis of microusrgery can be heplful to clarify some basic concept and design of micro-surgical manipulators. With these data we will alos propose an efficient in-parallel-platform manipulator having special kinematic structrue structure suitable for microsurgery.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.10a
• /
• pp.259-262
• /
• 2000

The Cross-impact Hierarchy Process (CHP), an extended model of the Analytic Hierarchy Process(AHP) which is linked to Cross Impact Analysis(CIA), is a powerful decision making tool to assist in the ranking of large number of dependent technological alternatives. In this paper, we will describe an application of the CHP to the aerospace industry. We here conducted a questionnaire survey for S company that is one of the representative aerospace companies in Korea. A questionnaire was designed to obtain both the priority with dependence (the CHP priority) and the priority with independence (the AHP priority) in order to compare the priority derived by each of two methods. The hierarchy in this case study is concerned with priority setting for R&D area to ensure dependent aerospace design technology of the company, The result shows that there exists the difference hard to neglect between the final priorities gained by two methods.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.4
• /
• pp.125-138
• /
• 2000

The purpose of this paper is to describe a new analytic method of capital budgeting projects that takes into account both customer wants and competitor's status and to give decision makers a tool for goal setting and planning for technology. This model, which is based on quality function deployment(QFD), has used the analytic hierarchy process(AHP) to determine the intensity of the relationship between the variables involved in each matrix of the model and the 0-1 integer programming to determine the allocation of funds to various technological projects. This paper also proposes how to calculate the new weight of columns to consider various strength levels of roof matrix, representing the correlation among the quality characteristics, using Lyman's normalization procedure. To compare this model with Partovi's model, I adapt the same example which is suggested by Partovi and I show that the value of object function, has maximization problem, in this model is larger than that in Partovi's model.