Product liability (PL), which began enforcement in 2002, refers to the legal responsibility of the manufacturers or sellers (wholesales or retailers) for the property damage or bodily harm caused by their product. With a strong enforcement of the Product Liability (PL) Act, companies are required to structure and operate a response system to defend or prevent product accidents efficiently, but small and medium enterprises (SMEs) are unable to respond more aggressively due to limitation of management resources. In this manner, it is important to develop response strategies for SMEs to efficiently cope with the PL Act. In this paper, the PEST (Political, Economic, Social, and Technological) analysis is performed to reveal the impact of the PL Act on SMEs in macro-economic point of view. To formulate SME's PL response strategy, SWOT analysis is performed to categorize each factors from PEST analysis and AHP is applied to identify the intensities of SWOT factors. The prioritized SWOT factor, results of PEST-SWOT-AHP analysis, are used to formulate SME's PL response strategies. The study results are briefly summarized as follows. To reduce product defects, it is necessary for SMEs to formulate PL response strategies for each phase of the product life cycle by continuously collecting and analyzing PL cases in the same industry or for similar products. In addition, SMEs should invest more technological effort to ensure product safety. Further, SMEs should spread PL awareness to all staff members by training internal PL experts. Moreover, a SME should enroll in PL insurance and spread this information to its customers so that they become aware that the company is proactively conforming to the PL law.
As the smart phone market grows rapidly, the significance of the application (app) market also increases. The purposes of this study were to identify market segments according to technological innovativeness and clothing involvement, and to compare the differences in lifestyles, benefits of fashion information app sought, and intention to use. The data were collected from smart phone users in their 10s to 30s in 2013, and a total of 292 data sets were analyzed. The findings of this study were as follows. The respondents were divided into three groups, innovative group, clothing involvement group, and passive group. Significant differences were found among three segments in terms of age, marital status, education level, and monthly income. With respect to five lifestyle factors, innovative group and clothing involvement group had higher mean scores for rational purchase, personal relationship, and personality pursuit than passive group. However, these two groups showed differences in brand pursuit factor. The benefits of the fashion information app were generated into two factors, information benefit and enjoyment benefit. Innovative group and clothing involvement group had higher values than passive group in these two factors. Finally, innovative group had the highest value on the intention to use fashion information app. This study attempts to provide fundamental information about the potential market segment for managers or marketers developing fashion information apps.
As the advent of the Fourth Industrial Revolution and Information Age, companies are in the state of infinite competition due to the rapidly changing technological environment and fierce competition. In this situation companies are making efforts to gain the competitive advantage by introducing information systems. Supply Chain Management (SCM) is considered a method to gain a competitive edge in rapid change. In fact, companies that already have introduced the SCM system are achieving company renovation with positive effects such as increase of sales stock reduction on-time delivery cost reduction and improved efficiency. This study was started to investigate the resistance that occurs in introducing the SCM system for small and medium-sized manufacturing industries that have not yet introduced the SCM system despite the importance of the SCM system, and to check the effect on the intention of the introduction. As the result of this study, the first is that the company has the higher technological innovation, the more positive the effect on Relative advantage Compatibility Perceived risk, Complexity. Second, The compatibility of the SCM system was rejected in innovation resistance, but it is adopted with the highest impact in the introduction intention. In addition, the mediating effect of innovation resistance was also rejected, confirming that if the SCM system is compatible for the company, it doesn't affect the resistance and is the biggest factor to consider in the introduction of the SCM system. Third, the perceived risk of the SCM system doesn't directly affect the intention to introduce, but has an indirect effect when mediation innovation resistance.
Studies on innovation point towards the need for both in-house research and development (R&D) capabilities along with collaborations with external organisations or linkages with other firms, universities and research institutes. The argument is that innovation is not just a firm specific factor but requires support from several other factors which in turn involves developing linkages with various actors/institutions as sources of resources and/or knowledge for innovation. This paper presents findings from an exploratory study about the Malaysian biofuel sector as an innovation system. Instead of using the neo-classical approach and proposing policy interventions based on traditional market failure rationale (Bergek et al., 2008a), the functional analysis of the technological innovation systems (TIS) approach is used to analyse the biofuel sector in Malaysia to help reveal the strengths and weaknesses in terms of its fulfillment of seven critical functions which are necessary for the generation and commercialization of a product. In addition an attempt is made to reveal the inducement and blocking mechanisms affecting the Malaysian biofuel TIS and the seeking of improved poor functionality. These functional aspects of the Malaysian biofuel sector are analysed in different phases of its development to gain an understanding of the different institutions and their functions at different phases of the development of the innovation system.
It is well known that in the knowledge-based economy a firm's intellectual property including patent is crucial for its competitive advantage. In industrial economy, tangible assets such as land and equipment have been of critical importance for a firm's competitiveness. However, as the paradigm shift to the knowledge-base economy is being accelerated, intangible assets such as intellectual property are considered to be more influential for a firm to be competitive. The valuation of intangible asset is as necessary as that of tangible asset. In particular, reasonably accurate valuation of patent which represents a firm's technological competitiveness seems to be of great importance since (1) it is essential for a firm's patent strategy development, (2) it can activate the technology market, and (3) it is necessary to evaluate a patent's technological contribution when multiple patents are used to develop and commercialize an innovative product. Unlike that of tangible asset, the valuation of intangible asset is very difficult. In order to figure out a value of patent it is necessary to use a number of appropriate valuation factors. In this paper, we surveyed various valuation factors presented by previous researches and several technology valuation organizations to find a set of common valuation factors considered to be of more importance.
Cancer Osaka thyroid, also known as Tpl-2 (Cot) is a member of the MAP3K kinase family and plays a key role in the regulation of the immune response to pro-inflammatory stimuli such as lipopolysaccharide (LPS) and tumour necrosis $factor-{\alpha}$ ($TNF-{\alpha}$). A series of Cot constructs with an N-terminal 6xHis tag were transiently expressed in HEK293 cells: $Cot_{130-399}$ (kinase domain), $Cot_{1-388}$ (N-terminal and kinase do-mains), $Cot_{1-413}$, $Cot_{1-438}$ (containing a putative PEST sequence), $Cot_{1-457}$ (containing both PEST and degron sequences) and $Cot_{1-467}$ (full-length protein). These Cot proteins were pulled down using an anti-6xHis antibody and separated by 2D electrophoresis. The gels were silver-stained and 21 proteins were detected that did not appear, or had substantially reduced intensity, in the control sample. Three of these were identified by MS and MS/MS analysis as Hsp90, Hsp70 and Grp78. Hsp90 appeared to bind to the kinase domain of Cot and this interaction was further investigated using co-immuno-precipitation with both overexpressed Cot in HEK293 cells and endogenous Cot in Hela cells.
Rao, M.Mohana;Rao, T. Prasad;Ram, S.S. Tulasi;Singh, B.P.
Journal of Electrical Engineering and Technology
/
제3권1호
/
pp.36-42
/
2008
In a gas insulated substation (GIS), Very Fast Transient Over-voltages (VFTOs) are generated due to switching operations and ground faults. These fast transients are associated with high frequency components of the order of a few hundreds of MHz. These transients may cause internal faults i.e., layer-to-layer faults or minor faults in a capacitively graded bushing, which is one of the important pieces of terminal equipment for GIS. In the present study, the PSPICE model has been developed to calculate the voltage distribution across the layers of 420kV graded bushing for high frequency pulses of rise time 1 to 50ns, which simulate the VFTO. For this simulation, an equivalent electrical network of bushing with different equivalent layers has been considered. The effect of different equivalent layers modeling circuits on the non-uniform voltage factor has been analysed. The influence of copper strip inductance on voltage distribution across layers has also been analysed for various rise times of high frequency transients. Finally, the leakage current of the bushing is calculated for evaluating the bushing condition under these transients.
This paper studies the supply and demand of Industrial Technology Labor-force(ITL) and analyzes the determinate of ITL shortage in Korean manufacturing. We classified the industry into four categories-high technology industries, medium-high technology industries, medium-low technology industries and low technology industries-based on its R&D intensity like OECD. For the empirical analyses we use a survey data collected from 5,703 enterprises. The key findings are as follows: Firstly, a large majority of ITL is engaged in more technology-intensive industries but the categories that are exposed to more serious labor-force shortage problem are medium-high technology industries and low technology industries. Secondly, in the terms of supply factor, the ITL shortage problems are mainly due to the avoidance of ITL jobs. And the demand point, the reason is that the most of ITL are not researchers but production managers. Thirdly, the cause of imbalance between supply and demand of ITL are different by the technological categories. For example, in the high technology industries, the supply factors, such as average wage and turnover rate played more important role in the imbalance. But in the low technology industries the demand factors, such as per capita sales and the ratio of ITL in all employees were relatively much more important. Based on the findings, we discovered some political meanings such as the necessity to plan various policies to resolve the shortage problem of ITL according to the technological categories, etc.
Recently, many companies are interested in adopting cloud computing as their IT strategy. However, no distinct results have appeared in the substantial implementation of this technology. The main reason for such result is from the absence of research models leading to high impact studies on cloud computing. Thus, this study attempts to find a possible answer for the following research question : what factors influence an organizational assimilation of cloud computing? This study investigates Technology-Push (TP)/Need-Pull (NP) theory as a main factor affecting cloud computing assimilation. Also, the study examines the moderating role of organizational readiness. TP includes of perceived benefits, vendor pressure, cost savings, and IT activity intensity while NP includes competitor orientation, information technology policy, technological turbulence, and performance gaps. In addition, organizational readiness suggests two variables, financial resources and technological knowledge. Result from 217 adopting organizations showed that all of these factors with exception of competitor orientation and vendor pressure, have statistically significant impact on assimilation of cloud computing. The implications of the findings propose a theoretical framework for the foundation of studies on cloud computing assimilation, which can server as important practical guidelines for technology development.
This article presents a numerical tool for dimensioning two-threaded fasteners connecting prismatic parts subjected to fatigue tension loads that are coplanar with the screw axis. A simplified numerical model is developed from unidirectional finite elements, modeling the connected parts and screws with bent elements and the elastic contact layer between the parts with springs. An algorithm updating the contact stiffness matrix, calculating forces and displacements at each node of the structure and thus normal stresses in the screws in both static and fatigue is further developed using C language. An experimental study is also conducted in parallel with the numerical approach to validate the developed model assumptions, the numerical model and the 3D finite element results. Since stiffness values for the compressive zones in the parts are analytically difficult to determine, a statistical software method is used, from which a tuning factor is derived for identifying these stiffness values. The method is also applied to set out the influence of each parameter on the fatigue behaviour of each screw. Finally, the developed model will be used to establish a new, sophisticated, fast and accurate tool for dimensioning bolted mechanical structures.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.