• 유통과학연구
• /
• 제17권4호
• /
• pp.51-57
• /
• 2019

Purpose - This study aims to improve the distribution structure of the OLED market and develop cost-effective optimization techniques. Specifically, it is a study on the optimization of ferric chloride to improve the etch of SUS MASK for OLED. Research design, data, and methodology - Applying the optimal conditions of the experiment, the final confirmation was evaluated for improvement by the Process Capability Index (Cpk). It is possible to derive social performance such as improvement of precision of SUS MASK manufacturing, economic performance such as defect rate, reduction of waste generation and treatment cost, technological achievement such as SUS MASK production technology, improvement of profit structure of technology development and process improvement do. Results - The improvement of the Cpk before the improvement was made was confirmed to be 0.57% with a defect estimate of 25.07% with a failure estimate of 0.57% after the improvement, and 8.84% with a failure estimate of 0.57% level after the improvement. Conclusions - If the conclusions obtained from the specimen experiment are applied to the manufacturing process of SUS MASK, it will be possible to expect excellent cost-effective competitiveness due to the improvement of precision and reduction of defect rate to enhance the OLED market penetration.

• 한국콘텐츠학회논문지
• /
• 제15권7호
• /
• pp.489-499
• /
• 2015

본 연구의 목적은 합법복제와 비교한 불법복제에 대한 상대적인 인식을 중심으로, 온라인 디지털콘텐츠 불법복제의 영향요인을 규명하는 데 있다. 이를 위해 기존 문헌과 행동예측이론 기반의 선행연구들에서 주요하게 제시되었던 요인들을 통합하여 비용-편익관점에서 접근하였다. 주요 결과는 다음과 같이 요약할 수 있다. 첫째, 합법복제에 비해 불법복제를 통해 얻을 수 있는 상대적 이익에 관한 결과로, 금전적 효용과 심리적 효용은 불법복제에 대한 태도 및 행동에 긍정적인 영향을 미치는 것으로 나타났다. 특히 금전적 효용은 불법복제행동의 주요 요인으로 나타나 불법복제를 행하는 이유가 금전적인 이유에 있음을 보여준다. 둘째, 불법복제의 상대적 손실요인 중 도덕적 비용은 불법복제태도에 부정적인 영향을 미치는 결정 요인으로 확인되었으며, 기술적 비용은 불법복제행동에 유의한 영향을 미치는 것으로 나타났다. 셋째, 불법복제에 대한 태도와 복제행동은 밀접한 영향관계임이 확인되었다. 이는 태도가 의도를 매개하지 않고도 행동을 이끄는 선행요인이 될 수 있음을 보여주는 결과라 하겠다.

• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.54-63
• /
• 2015

Increasing air pollution levels and the global oil crisis has become a major hindrance in the growth of our automobile sector. Traditional Internal Combustion engines running on non-renewable fuels are proving to be the major culprit for the harmful effects on environment. With few modifications and also with assistance of few additional components current small SI engines can be modified into a pneumatic engine (commonly known as Compressed Air Engines) without much technical complications where the working fluid is compressed air. The working principle is very basic as adiabatic expansion of the compressed air takes place inside the cylinder pushing the piston downwards creating enough MEP to run the crank shaft at decent RPM. With the assistance of new research and development on pneumatic engines can explore the potential of pneumatic engines as a viable option over IC engines. The paper deals with analysis on RPM variation with corresponding compressed air injection at different crank angles from TDC keeping constant injection time period. Similarly RPM variation can also be observed at different injection pressures with similar injection angle variation. A setup employing a combination of magnetic switch (reed switch), magnets and solenoid valve is used in order to injection timing control. A conclusive data is obtained after detailed analysis of RPM variation that can be employed in newly modified pneumatic engines in order to enhance the running performance. With a number of benefits offered by pneumatic engine over IC engines such as no emissions, better efficiency, low running cost, light weight accompanied by optimized injection conditions can cause a significant development in pneumatic engines without any major alteration.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.768-773
• /
• 2009

Measuring method being applied for off-shore works is performed by using data logger or manual measuring instrument with wiring the cable connected from the sensor up to the position where measuring is allowed.(upper part of embankment or marine structure) Measuring management by using existing measuring method may be acceptable on the condition that the ground deformation volume(vertical, horizontal) is generally minimal and the site condition is good. But loss of measuring instrument, sensor cable failure or cutting is taken place frequently due to significant change of ground behavior caused by an external force change(embankment, excavation) under very soft ground condition(N value below 0-4). In case of the marine works, in particular, loss rate of measuring instrument is highly represented due to the factors of working barge anchoring, constructional interference and natural disaster. In order to solve these problems, measuring management was performed with employing underground wireless system at the immersed tunnel site. Measuring data was obtained freely under the marine environment by using underground wireless communication and cable cutting potential by ground behavior could be reduced. Measuring cost savings and its installation convenience were maximized by way of off-shore tower installation or cabling and by minimizing constructional interference of off-shore working barge. This case of measuring management was accomplished successfully.

• 한국정보통신학회논문지
• /
• 제19권11호
• /
• pp.2724-2730
• /
• 2015

사물인터넷은 오늘날 기술 주기에서 가장 널리 논의되고 있고 있는 기술적 개념이다. 이러한 기술은 우리가 어떻게 일을 하는지 뿐만 아니라 어떻게 사는지에 대한 급진적 변화를 예측할 수 있다. IoT의 개념은 기본적으로 데이터 네트워크를 통해 컨트롤 할 수 있는 연결된 장치의 웹을 의미한다. 이와 같은 장치들을 컨트롤하기 위해 요구되는 기술 비용과 스마트폰을 통한 인터넷의 연결의 증가로 IoT는 향후 10년 안에 모든 퍼베이시브 기술이 될 것으로 예상된다. 본 논문에서는 지식재산권(특허)의 관점에서 빠르게 성장하는 기술 도메인의 기술적 요소들을 살펴본다. IoT 기술의 특허 분포에서 전체 특허들의 5%가 상위 특허 출원인이고 나머지는 다수의 출원인이 차지하고 있다. 특히, 미국지역에 가장 많이 출원하고 있고, 이것은 한국과 일본의 큰 아시안 시장과 밀접한 관계가 있다.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.111-122
• /
• 2018

The private sector is currently reviewing the feasibility of the project or deciding economic policies by analyzing the economic ripple effects. However, the arms acquisition project focuses on the need for the national defense weapons system by analyzing the costs and the effectiveness of the analysis and reviewing the necessity and feasibility of the project. In order to analyze the economic ripple effects, KB (the Bank of Korea) prepares and publishes an analysis table of industrial associations in a given unit. IAAR (the industrial association analysis report) is difficult to apply directly to the defense weapons system. Therefore, research on the economic ripple effects applicable to the defense arms procurement project was needed. In this study, we propose the generic methodology for estimating economical and technical ripple effects resulted in acquiring new weapon systems. Based on the analysis of inter-industrial relations, economical ripple effects are estimated with production inducing effects, value-induced effects, employment-induced effects and export-induced effects. Also, the technological ripple effects are estimated with technological intensity represented by investment cost in research and development. To show the validity of proposed methodology, a case study of acquiring new weapon systems such as GR (guided rocket), destroyer, and helicopter is accomplished. From the case study, it is concluded that these economical & technological ripple effects can be used as a reference to decision making in the course of acquiring major future defense weapons systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.5860-5876
• /
• 2018

A single snapshot data can only provide limited amount of information so that the rank of covariance matrix is not full, which is not adopted to complete the parameter estimation directly using the traditional super-resolution method. Aiming at solving the problem, a joint time delay and angle estimation using matrix pencil method based on information reconstruction vector for orthogonal frequency division multiplexing (OFDM) signal is proposed. Firstly, according to the channel frequency response vector of each array element, the algorithm reconstructs the vector data with delay and angle parameter information from both frequency and space dimensions. Then the enhanced data matrix for the extended array element is constructed, and the parameter vector of time delay and angle is estimated by the two-dimensional matrix pencil (2D MP) algorithm. Finally, the joint estimation of two-dimensional parameters is accomplished by the parameter pairing. The algorithm does not need a pseudo-spectral peak search, and the location of the target can be determined only by a single receiver, which can reduce the overhead of the positioning system. The theoretical analysis and simulation results show that the estimation accuracy of the proposed method in a single snapshot and low signal-to-noise ratio environment is much higher than that of Root Multiple Signal Classification algorithm (Root-MUSIC), and this method also achieves the higher estimation performance and efficiency with lower complexity cost compared to the one-dimensional matrix pencil algorithm.

• Journal of Korea Trade
• /
• 제25권3호
• /
• pp.1-20
• /
• 2021

Purpose - The purpose of this paper is to examine the welfare effects of standards harmonization between technologically asymmetric countries, and to determine optimal harmonization strategies for a country with mid-level technological advancement. Design/methodology - Following Salop's circular city model (Salop, 1979), this study constructs a simple, horizontally-differentiated oligopoly model in which three firms and three countries exist. Each country adopts different compatibility standards and each firm incurs conversion costs for foreign market access due to differences in standards. The conversion costs are related to technology; standards harmonization removes these costs between participating countries. The paper considers three cases: i) no harmonization; ii) harmonization with the more technologically-advanced country and iii) harmonization with the less technologically-advanced country. Findings - The paper first considers a scenario in which all three firms occupy some share of the market in each country. It shows that standards harmonization with both the technologically moreor less-advanced country always increases consumer surplus and social welfare. In addition, the producer surplus will increase if the harmonization partner has a higher technology level, whereas it may decrease if the partner has a lower technology level. It also shows that if most domestic export goods are in sectors with conversion costs above a certain level, harmonizing standards with a technologically more-advanced country should be prioritized. Such strategies, moreover, should be emphasized when there exists a large technology gap among countries. Lastly, the paper considers another scenario, in which harmonization leads to the foreclosure of the non-member firm from the member countries' markets. It shows that harmonization improves the social welfare of a mid-level technology country regardless of its partner's technology. It also shows that the country should prioritize harmonization with the technologically less-advanced country. Originality/value - Though some of the existing studies consider the welfare effects of harmonization, their main assumption is that firms have the same conversion technology. Since complying with standards often requires substantial technological advancement and technical expertise, harmonization of compatibility standards between countries with gaps in technological ability carries different implications. This paper investigates the welfare effects of this harmonization and determines an optimal harmonization strategy while considering technological asymmetry among countries in standards compliance.

• 한국산학기술학회논문지
• /
• 제17권8호
• /
• pp.127-132
• /
• 2016

본 연구의 목적은 농촌진흥청 국립원예특작과학원 감귤시험장이 2014년 최종선발을 마친 감귤(학명:Citrus unshiu) 하양조생(제감가-5호) 품종개발의 기술가치를 평가하는 것이다. 감귤신품종(하양조생) 개발의 기술가치 및 경제적 평가방법은 비용접근법(cost approach), 수익접근법((income approach), 시장접근법(market approach) 중에 수익접근법이 이용되었고, 순현재가치(NPV), 내부수익률(IRR), 편익/비용 비율(Benefit/Cost ratio)을 추정하였다. 이는 농업 R&D사업의 효율성과 실용성 제고를 위하여 이용될 수 있을 것이다. 분석결과에 따르면, 감귤신품종인 하양조생 개발에 따른 기술가치평가액은 할인율 수준에 따라 최소 1,094.5억 원(할인율 8%)에서 최대 1,950.4억 원(할인율 4%), 평균 1,453.8억 원(할인율 6%)으로 추정되었고, 내부수익율 IRR의 값은 51.4%로 본 연구에서 기본할인율로 이용된 6%(10년만기 국고채 할인율 3%와 리스크프리미엄 3%를 합친 것) 보다 매우 크고, 순현재가치(NPV)의 평균은 145,375백만원으로 영보다 훨씬 크며, B/C 비율도 최대(할인율 4%) 81.3에서 최소(할인율 8%) 46.1, 평균(할인율 6%) 60.9로 나타나 감귤 신품종 개발사업의 경제적 타당성은 매우 높은 것으로 평가된다.

• 기술혁신학회지
• /
• 제14권2호
• /
• pp.223-245
• /
• 2011

한국의 서비스산업을 대상으로 기술혁신이 고용에 미치는 영향을 알아보기 위하여 기술우위혁신전략과 비용우위혁신전략이 고용에 미치는 영향이 서비스업의 섹터별로 어떻게 다르게 나타나는지를 기업수준에서 분석하였다. 본 연구의 분석모형은 Bogliacino와 Pianta(2010)의 연구모형에 기반하고 있으며 자료는 과학기술 정책연구원(STEPI)의 서비스업기술혁신조사표(2006)를 이용하였다. 실증 분석결과를 살펴보면, 모든 섹터의 기업에서 수요증가가 고용증가에 가장 큰 영향을 주는 것으로 나타났고 일부섹터 기업에서는 기술혁신전략이 고용증가에 영향을 주는 것으로 나타났다. 즉 과학 기반형 기업에서는 기술우위혁신전략이 고용에 긍정적인 영향을 주었으며, 전문공급자형 기업에서는 비용우위혁신전략이 고용에 부정적인 영향을 주었다. 규모 및 정보집약형 기업에서는 임금증가율이 고용에 부정적인 영향을 주었으며, 공급자지배형 기업에서는 수요증가만이 고용증가에 강한 긍정의 영향을 주었는데 이들 두 섹터의 기업들에서는 비용우위 혹은 기술우위의 혁신전략이 모두 고용에 유의미한 영향을 주지 못하였다. 한국의 서비스업을 대상으로 한 기업수준의 분석에서도 이처럼 산업유형의 특성에 따라 서비스기업들은 기술혁신의 고용효과가 달랐는데 비교적 혁신수준이 높은 과학기반형기업들과 전문공급자형 기업들은 유럽 주요국과 동일한 양상으로 혁신의 고용효과를 보였으나 나머지 유형의 기업들은 혁신수준이 현저하게 떨어지므로 혁신전략자체가 고용에 유의미한 영향을 주지 못한 것으로 보인다.