• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.289-299
• /
• 2020

The composition of convergence cross-section of the material is a technique that provides reasonable design and construction of structures. It is frequently used in medium-sized bridges and architectural structures. However, the structural behavioral spare capacity enhancement of the structure by the application of the convergence cross-section is still limited by the expandability due to the limiting state of each material. In order to overcome these limitations, this study reasonably analyzed the construction stages before and after the convergence cross-section constructed and developed a technique for forming multi-point boundary conditions using struts, which are compression members. Based on the existing cases, a reasonable construction step for forming the material composite section of the entire structural system of the structure was derived, and a numerical analysis model for a specific part was constructed to analyze the behavior of the strut application. As a result of this study, the effect of reducing the sectional force of 7.40% in beam-column joint and 6.31% in the center of girder was derived, and the deflection, which is a measure of the serviceability of the structure, improved by 54.41% from the installation and dismantling of strut members at each construction stage.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 봄 학술발표회 논문집
• /
• pp.68-71
• /
• 1991

In this study, to make a construction strategy to minimize or protect punchout and steel corrosion in CRCP, the following items have been studied; 1) Review of the structural response characteristics and the current design criteria in CRCP. 2) Evaluation of basic analytical concepts and the limit of application in the current models 3) Some suggestions of performance monitoring in CRCP and evaluation of construction s-trategy with preformed crack induces.

• 한국강구조학회 논문집
• /
• 제16권1호통권68호
• /
• pp.123-134
• /
• 2004

본 연구에서는 효율적인 형상최적화를 위해 다단계 분할기법으로 트러스 구조물의 형상 최적화를 시도하였다. 1단계에서는 단면적을 설계변수로 하여 중량, 또는 체적을 목적함수로 하고 다하중 재하조건 하의 거동제약조건과 부가적인 제약조건을 고려하여 비선형 최적화 문제를 형성한다. 이 비선형 계획문제를 축차 선형계획 문제로 변환하여 개선된 허용방향법으로 최적화하였다. 이때 필요한 도함수는 다른 연구와 달리 효율적이라고 알려진 거동공간법으로 구하였고, 최적화 과정 중 이를 이용하여 부재력를 근사화 함으로써 계산의 효율성을 높였다. 2단계에서는 형상 설계변수만을 고려한 무제약 최적화 문제로 형성한 후 일방향 탐사기법을 적용하여 형상을 최적화하였다. 이와 같이 구성된 본 연구의 알고리즘을 몇 가지 트러스 구조물에 적용하여 본 알고리즘의 적용성과 효율성 및 타당성을 증명하였다.

• 항공우주기술
• /
• 제3권1호
• /
• pp.65-78
• /
• 2004

본 연구는 램제트 엔진 성능시험기의 설계기술 습득을 위하여 진행된 연구의 일부분으로 자유제트 형식 시험기의 설계기술을 연구한 결과를 정리한 것이다. 연구의 대상은 램제트 엔진 성능시험기의 범용 설비인 오염공기 방식 가열기(Vitiated Air Heater), 시험부, 디퓨저, 이젝터 등으로 설계기법 및 설치기법들을 중점으로 연구하였다. 램제트 엔진 성능시험기 시험부는 기본 성능시험기의 작동 영역(마하2~5, 고도0~25km)을 토대로 10개의 작동점으로 재구성하여 각 작동점에서의 마하수, 고도에 따른 시험장치의 초음속 노즐, 디퓨저, 이젝터 등 주요 구성요소들의 물성치(온도, 압력 등)를 계산하였으며, 성능시험기의 구동 방법 등에 대한 내용을 기술하였다.

• 한국의류산업학회지
• /
• 제15권4호
• /
• pp.514-522
• /
• 2013

This study reviews the principles for the techniques of Impressionist paintings as well as analyzed contemporary fashion designs with a focus on a motif-building technique based on the laws of a screen equivalent as a visual formative approach. We provide design principles based on fashion design painting techniques. Previous research on the laws of the screen equivalent of Impressionist paintings were studied and a qualitative analysis was conducted on fashion design cases from 2011, 2012 S/S and F/W collections. The analysis resulted in the following outcomes. First, the development of new motifs were found directly correlated to the creativity of design if it was a motif-building design. Second, in the selected fashion design cases, cutting lines and details were covered by motifs and their shapes collapsed in regards to overall visual uniformity so that specific details were hard to identify. Third, clothing shapes are recognized the changing colors of motifs and not through construction pattern lines; therefore, the expressions of diverse visual forms were available without being disturbed by construction pattern lines. This is deemed equivalent to an Impressionist painting style that depicts shapes with colors instead of lines. Lastly, the cases covered in this study have created new visual aspects that replace the stereoscopic spatial depth of clothes with a 'sensuous surface'. The pleasures derived from the sensuous surface are deemed equivalent to the visual pleasures created by Impressionist paintings.

• 건축역사연구
• /
• 제19권3호
• /
• pp.7-29
• /
• 2010

The form of the Wangheungsa Temple's wooden pagoda site is that of the traditional form of the wooden pagodas constructed during the Baekjae Period. Likewise, it is an important ruin for conducting research on the form and type of the wooden pagodas constructed during the Baekjae Period. In particular, the method used for the installation of the central pillar's cornerstone is a new technique. The purpose of this research is to restore the ruin of the Wangheungsa Temple's wooden pagoda of the Baekjae Period that remains at the Wangheungsa Temple's wooden pagoda site. Until now, research conducted on the wooden pagoda took place mostly centered on the Hwangryongsa Temple's wooden pagoda. Meanwhile, the reality concerning Baekjae's wooden pagoda is one in which there were not many parallel cases pertain to the design for restoration. This research paper wants to conduct academic examination of the Wangheungsa Temple's wooden pagoda to organize the intention of design and design process in a simple manner. This research included review of the Baekjae Period's wooden pagoda related ruins and the review of the existing wooden pagoda ruin to analyze the wooden pagoda construction technique of the era. Then, current status of the Wangheungsa Temple's wooden pagoda site is identified to define the characteristics of the wooden pagoda, and to set up the layout format and the measure to estimate the size of the wooden pagoda in order to design each part. Ultimately, techniques and formats used for the restoration of the wooden pagoda were aligned with the wooden pagoda of the Baekjae Period. Basically, conditions that can be traced from the current status of the Wangheungsa Temple site excavation using the primary standards as the standard. Wangheungsa Temple's wooden pagoda was designed into the wooden pagoda of the Baekjae's prosperity phase. The plane was formed into $3{\times}3$ compartments to design into three tier pagoda. The height was decided by factoring in the distance between the East-West corridors, size of the compartment in the middle, and the view that is visible from above the terrace when entering into the waterway. Basically, the origin of the wooden structure format is based on the Goguryeo style, but also the linkage with China's southern regional styles and Japan's ancient wooden pagoda methods was factored in. As for the format of the central pillar, it looks as if the column that was erected after digging the ground was used when setting up the columns in the beginning. During the actual construction work of the wooden pagoda, central pillar looks as if it was erected by setting up the cornerstone on the ground. The reason that the reclaimed part of pillar that use the underground central cornerstone as the support was not utilized, was because the Eccentric Load of the central pillar's cornerstone was factored in the state of the layers of soil piled up one layer at a time that is repeated with the yellow clay and sandy clay and the yellow clay that were formed separately with the $80cm{\times}80cm$ angle at the upper part of the central pillar's cornerstone was factored in as well. Thus, it was presumed that the central pillar was erected in the actual design using the ground style format. It is possible to presume the cases in which the reclaimed part of pillar were used when constructed for the first time, but in which central pillar was installed later on, after the supplementary materials of the underground column is corroded. In this case, however, technique in which soil is piled up one layer at a time to lay down the foundation of a building structure cannot be the method used in that period, and the reclamation cannot fill up using the $80cm{\times}80cm$ angle. Thus, it was presumed that the layers of soil for building structure's foundation was solidified properly on top of the central pillar's cornerstone when the first wooden pagoda construction work was taking place, and that the ground style central pillar was erected on its upper part by placing the cornerstone once again. Wangheungsa Temple's wooden pagoda is significant from the structure development aspect of the Korean wooden pagodas along with the Hwangryongsa Temple's wooden pagoda. Wangheungsa Temple's wooden pagoda construction technique which was developed during the prosperity phase of the Baekjae Period is presumed to have served as a role model for the construction of the Iksan Mireuksa Temple's wooden pagoda and Hwangryongsa Temple's wooden pagoda. With the plan to complement the work further by excavating more, the basic wooden pagoda model was set up for this research. Wangheungsa Temple's wooden pagoda was constructed as at the Baekjae Kingdom wide initiative, and it was the starting point for the construction of superb pagoda using state of the art construction techniques of the era during the Baekjae's prosperous years, amidst the utmost interest of all the Baekjae populace. Starting out from its inherent nature of enshrining Sakyamuni's ashes, it served as the model that represented the unity of all the Baekjae populace and the spirit of the Baekjae people. It interpreted these in the most mature manner on the Korean peninsula at the time.

• 한국주거학회논문집
• /
• 제17권3호
• /
• pp.41-49
• /
• 2006

Precast concrete apartments were main stream of domestic industrialized housing around 90's, and Steel Houses applying Steel Stud technique with light weighted steel have been dominant portion since 1995. On the other hand, various building techniques including Steel Stud method and highly prefabricated and industrialized Unit method are prevailing in developed countries like Japan. Steel stud and unit box have their own merits and demerits, but the more crucial aspect is that the constant design standard should be applied in each design procedure. It entails the necessity of industrial housing development on the open system basis. In this study, the design standard for unit house will be established coping with the established preparing standard for design specifications defined by architectural law and promotion law of housing construction. That is for design standard of industrialized private housing on the open system basis. This study attempts to propose the design automation, with the method of unit construction of which the rate of pre-fabrication is the biggest, that can cope with the demand of user on the basis of open-system. Ticky-tacky is the biggest technical problem in suppling industrialization housing. Therefore, we will suggest a basic plan for design automation of unit modular housing which can raise the productivity of industrialization housing by applying open system, utilized by DB of component and unit, and solve the problem concerned about ticky-tacky.

• 한국강구조학회 논문집
• /
• 제10권1호통권34호
• /
• pp.125-135
• /
• 1998

본 연구에서는 내측지점의 상승 하강을 이용하여 부모멘트구간에 프리스트레스를 도입하는 3경간 연속 프리플렉스 합성형교의 설계방법을 제시하고 이를 전산 프로그램화하여 최적설계를 수행하였다. 최적설계를 위한 목적함수로는 3경간 연속 프리플렉스 합성형교의 재료비용으로 결정하고, 제약방정식은 설계과정 및 시방서에 명시된 최소 설계단면제원과 부재별 허용응력에 근거하여 구성하였다. 최적설계기법으로는 기존의 2경간 최적화 연구에서 제시된 수치적 최적화기법의 하나인 순차 비제약 최소화기법을 재검토 및 수정하여 설계를 수행하였다. 민감도분석 결과에 근거하여 지간길이에 따른 최적설계단면을 결정하고, 여기서 정해진 최종 설계단면을 단순보형 프리플렉스 합성형교의 설계단면과 비교하였다. 그리고 각 지간별 합성보의 형고를 변화시키면서 최적화를 수행하여 형고와 재료비용과의 관계도를 제시하고 최적형고를 결정하였다.

• 한국CDE학회논문집
• /
• 제15권3호
• /
• pp.234-242
• /
• 2010

3D CAD technology has been extended to a medical area including dental clinic beyond industrial design. The 2D images obtained by CT(Computerized Tomography) and MRI(Magnetic Resonance Imaging) are not intuitive, and thus the volume rendering technique, which transforms 2D data into 3D anatomic information, has been in practical use. This paper has focused on a method and its implementation for forming 3D geometric surface model from laminated CT images of the pubis. The implemented system could support a dental clinic to observe and examine the status of a patient's pubis before implant surgery. The supplement of 3D implant model would help dental surgeons settle operation plans more safely and confidently. It also would be utilized with teaching materials for a practice and training.

• International Journal of Advanced Culture Technology
• /
• 제7권1호
• /
• pp.133-142
• /
• 2019

This study aims to understand how different construction methods impact scenic preference of green wall and clarify features of each construction method to help select the most suitable construction method for the wanted image of a green wall by providing the basic data for further development and distribution of green wall. Questionnaire developed by the Repertory Grid technique proved that 11 adjectives can be used to describe scenic features of a green wall and 4 preference elements. The result of the Scenic evaluation, the Felt type scored high in 'Aesthetic' and 'Maintenance' meaning that it is the most suitable method when constructing a green wall to improve urban scenery. Regression analysis was conducted to understand the link between the preference elements and scenic impression of a green wall. The result is that the higher the preference is on the design of a green wall, the higher the score is for 'Aesthetic'. Also, the higher the preference is on Bio-Diversity, Design, Growth, the higher the score is for 'Natural'. The above findings can be important measures and reference for selection of the right construction method when planning a green wall.