• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4465-4471
• /
• 2023

Hands-on education and training is a key part of fixing and developing technology knowledge and is an inherent part of many engineering and scientific curricula. However, access to large complex training facilities, such as nuclear reactor, could be limited by various factors, such as unavailability of those facilities in the region, high traveling costs or harmonization of the schedules of hands-on E&T with theoretical lectures and with the operational schedule of the facility. To handle the issue, several success stories have been reached with the introduction of the Internet Reactor Labs (IRL). The Internet Reactor Labs can strongly contribute to accessibility of training at research reactors and can contribute to improvements in their utilization. The paper describes the development of the Internet Reactor Lab at the VR-1 reactor of the Czech Technical University in Prague. Contrary to single-purpose IRLs, it presents various modalities of online teaching and training in experimental reactor physics and reactor operation in general as well as outreach activities that have been developed in recent years.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.3
• /
• pp.27-40
• /
• 2013

Rotorcraft operating in the domestic aviation safety techniques are applied CRM training is conducted but, aircraft accidents caused by human factors has not shown a declining trend. Thus, knowledge of aviation safety and human factors for the spread of awareness of improved rotorcraft flight operations department managers to understand the complexity of nature and culture, and to perform high-risk mission helicopter pilot study of local activation and enhance safety awareness research was conducted in order to. In this study, the development direction of CRM training studies in order to identify the leading NOTECHS (Non-Technical Skills; non-technical pilot skills) of the four categories as the independent variable and the dependent variable corresponding to the resulting effect on the key variables awareness of the differences were studied. In addition, the direction and strength of the relationship were analyzed to determine the relationship of each independent variable to assess the impact on the dependent variable regression analysis was performed. Pilot training and evaluation of non-technical skills related to the teaching reflected in the CRM training and assessment must be carried out with 5 star rating scale was preferred. Therefore, to meet our country rotorcraft operating environment 'NOTECHS' aviation safety by developing training programs reflected in the educational process, implementation, and periodic training and assessment is done in future research on this analysis and feedback is done to reflect the specific performance expect.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.3
• /
• pp.767-777
• /
• 2017

The purpose of this paper is to develope a training model and to make a syllabus for electro-technical officers(ETOs) on ship. In order to complete the purpose, firstly we study on qualification for electro-technical officers and also examine the foreign, domestic cases. Secondly, through the STCW convention and the IMO Model Course 7.08, we have compared the standards of competence for officers in charge of an engineering watch and ETO, and analyze the additional standards of competence to acquire the ETO's licenses. Finally, based on the results of this, we will suggest the development of a training model that officers in charge of an engineering watch must complete in order to obtain an ETO's license. This paper is expected to be useful in the educational institution preparing for training course.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.3
• /
• pp.292-305
• /
• 2013

This study reported present state of clothing technical designers' work duties and working conditions, so as to suggest effective ways to develop professional training methods for them. Technical designers working for vendors and agents were surveyed as they represent the majority of technical designers in Korean clothing industries. Survey participants were 62 technical designers working for 6 clothing vendors and 2 clothing agents, and the survey closely inspected their work qualifications, duties and responsibilities, working conditions and training conditions. Survey was conducted from June $27^{th}$ to July $17^{th}$, 2012. The questionnaire examined frequency analysis and multiple response analysis using SPSS 19.0 Windows after investigating documents and work fields through personal experiences and interviews from technical designers for data collection and analysis. A chi-square test analyzed the preferred type of fitting for technical designers of vendors and agents. The results showed that 32.3% of those surveyed have more than 7 years of work experience and the highest level of education is predominantly a bachelor's degree (57 people, 91.9%). Among the work responsibilities, respondents did sample measuring more than four times a day. Also, the results showed that technical designers needed to qualify: first 'Fitting Technic', second 'Pattern Correction Capability', and third 'English Skills to Communicate with Buyers'; subsequently, education on several technics (such as measuring, grading, and fitting) were required for the job. Current technical designers answered that they need more various work-related education. However, the analyzed results showed that pre work-related training was insufficient. The data shows that technical designers require re-education in 'Pattern Correction Method' (61.3%) and 'Sewing Education' (64.5%).

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.8
• /
• pp.709-712
• /
• 2015

This paper will introduce the development case study about virtual-reality-based operation training system for steel making process. Steel making process consist iron making process to create liquid steel, pig iron, by reduction process, steel making process to make molten steel by refining, continuous casting process to make slab, and rolling process to make final product like coil, plate. This steel making process deals with liquid and solid products, so facilities of steel making process are very various and complicated. In addition, according to various customer requirements, the recycle of facilities and recipes changing have been fast. So the training for skilled operators is very important point. In this paper, we develop steel making training system based virtual reality for training skilled operator. This system consists of virtual machine, virtual HMI, and virtual control panel. And for fitting the characteristics of each process and increasing the education effectiveness, we develop dynamic methods like the method of dynamic education system configuration, initial facilities setup operation education system, and etc.

• Journal of Practical Engineering Education
• /
• v.6 no.1
• /
• pp.37-42
• /
• 2014

The automated visual inspection system (machine vision system) for quality assurance is important factory automation equipment in the manufacturing industries, such as display, semiconductor, etc. There is a lot of demand for the machine vision engineers. However, there are no technical training courses for machine vision technologies in vocational schools, colleges and universities. In this paper, we present the implementation of line scan camera based equipment for technical training of the automated visual inspection system. The training system consists of the X-Y stage which is widely used in machine vision industries and its variable image resolution are set to $10-30{\mu}m$. Additionally, this training system can attach the industrial illumination, either the direct illuminator or coaxial illuminator, for verifying the effect of illuminations. This means that the trainee can have a practical training in various equipment conditions and the training system is similar to the automated visual inspection system in industries.

• Journal of Korea Multimedia Society
• /
• v.6 no.4
• /
• pp.668-675
• /
• 2003

Now a days many industries and bigger organisation (Indian Railways, Bharat Heavy Electricals Ltd.) are facing difficulties in implementing the new technology because of non-availability of fully trained staff. Also for the employed technical and other staff lot of resistance management has to face to get them trained for adoption of new technology. There are also very less organisations who can design effective training programmes and at the same time develop course material specially multimedia packages and computer base training (CBT) which can satisfy the need of different target groups of industries. Indian Railways was also facing similar situation while implementing the Air Brake System technology In Indian Railways. TTTI Bhopal took that challenge and designed, developed and trained Indian Railways trainer for implementation of the package on different target group. The present paper offers a case study on the same.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.101-102
• /
• 2023

This study analyzes the problems of legal job training currently being implemented to improve the job competency of beginner and intermediate technical personnel working in design offices and suggests improvement measures.

• Archives of Plastic Surgery
• /
• v.40 no.4
• /
• pp.312-319
• /
• 2013

Over the past decade, driven by advances in educational theory and pressures for efficiency in the clinical environment, there has been a shift in surgical education and training towards enhanced simulation training. Microsurgery is a technical skill with a steep competency learning curve on which the clinical outcome greatly depends. This paper investigates the evidence for educational and training interventions of traditional microsurgical skills courses in order to establish the best evidence practice in education and training and curriculum design. A systematic review of MEDLINE, EMBASE, and PubMed databases was performed to identify randomized control trials looking at educational and training interventions that objectively improved microsurgical skill acquisition, and these were critically appraised using the BestBETs group methodology. The databases search yielded 1,148, 1,460, and 2,277 citations respectively. These were then further limited to randomized controlled trials from which abstract reviews reduced the number to 5 relevant randomised controlled clinical trials. The best evidence supported a laboratory based low fidelity model microsurgical skills curriculum. There was strong evidence that technical skills acquired on low fidelity models transfers to improved performance on higher fidelity human cadaver models and that self directed practice leads to improved technical performance. Although there is significant paucity in the literature to support current microsurgical education and training practices, simulated training on low fidelity models in microsurgery is an effective intervention that leads to acquisition of transferable skills and improved technical performance. Further research to identify educational interventions associated with accelerated skill acquisition is required.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.113-120
• /
• 2004

Considering the present and expected demand for human resources by the maritime community, its quantity and quality depend on the number of the ships and the technology applied to them. Scientific and economic developments in this community bring the intensive use of modem technology for many of ships operation. Generally it effects to reduce the quantity of manpower, while it increases the requirement of qualifications of human resources to utilize such advanced technology. Considering above, the maritime education, training and research activities should be revised and updated according to the demand of the community. Because of a difference between the transition of the demand for the human resources and development of the maritime education, training and research activities, there are two most common questions as “What to teach” and “How to teach”. The first question has been asked for many years. The contents of maritime education and training are always related to the existing maritime knowledge and technology and should be updated with consideration of changes of the demand namely “Globalisation of maritime community”. It brings globalisation of the maritime education, training and research activities. The second question is still keeping us busy to look for the best way. Presently traditional methods are used together with new system, while the use of sophisticated simulation, communication and information systems etc. and it is changing our understanding on teaching. This paper introduces the new role of Maritime Institutions from the viewpoints of the maritime education. training and research activities. The role of guide for seafarers and maritime companies is always essential and the concepts such as “Refreshment Training”, “On the Job Training”, “Lifelong” or “Continuous Training” bring new understanding to the training period, trainee's age and position. As a result, the maritime institutions should be ready for their new role, which is, in brief, guiding the maritime society, recommending and providing new learning environments, organising research and developments, performing the education, training and assessment, improving existing methods and developing new methods of the education, training and assessment.