• Journal of the Korean Vacuum Society
• /
• v.16 no.3
• /
• pp.161-166
• /
• 2007

Photovoltaic (PV) technology permits the transformation of solar light directly into electricity. For the last five years, the photovoltaic sector has experienced one of the highest growth rates worldwide (over 30% in 2006) and for the next 20 years, the average production growth rate is estimated to be between 27% and 34% annually. Currently the cost of electricity produced using photovoltaic technology is above that for traditional energy sources, but this is expected to fall with technological progress and more efficient production processes. A large scale production of solar grade silicon material of high purity could supply the world demand at a reasonably lower cost. A shift from crystalline silicon to thin film is expected in the future. The technical limit for the conversion efficiency is about 30%. It is assumed that in 2030 thin films will have a major market share (90%) and the share of crystalline cells will have decreased to 10%. Our research at Sungkyunkwan University of South Korea is confined to crystalline silicon solar cell technology. We aim to develop a technology for low cost production of high efficiency silicon solar cell. We have successfully fabricated silicon solar cells of efficiency more than 16% starting with multicrystalline wafers and that of efficiency more than 17% on single crystalline wafers with screen printing metallization. The process of transformation from the first generation to second generation solar cell should be geared up with the entry of new approaches but still silicon seems to remain as the major material for solar cells for many years to come. Local barriers to the implementation of this technology may also keep continuing up to year 2010 and by that time the cost of the solar cell generated power is expected to be 60 cent per watt. Photovoltaic source could establish itself as a clean and sustainable energy alternate to the ever depleting and polluting non-renewable energy resource.

• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.112-122
• /
• 2020

The purpose of this study was to find out the correlation through comparative analysis of used materials and manufacturing techniques such as firing characteristics for sherds excavated from celadon kiln site in Punggil-ri, Jangheung. The color difference of the sherds was very wide, and even in the microstructure of the cross section of the glaze layer and the body layer, the celadons, whitewares, blackware, and stonewares could not be characterized because they did not show distinct differences from each other. As a result of estimating the firing temperature through the analysis of constituent minerals and thermal analysis, most of them were estimated to have been fired at 1000℃, but some were fired at high temperatures above 1200℃. It was difficult to clearly distinguish between celadon and whiteware even in the major compositional content of bodies. In the statistical analysis, glaze could be classified three group according to the type of sherds, but the bodies of celadons, whitewares, and blackware classified into one similar group. It is considered that it is not more likely differences in raw materials but some ingredients were removed or added during the purification process. Conclusionally, in this kiln site was found through scientific analysis that there were technical attempts to produce various ceramics, and that the manufacturing techniques and materials of ceramics were in an early stage that was not stabilized.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.207-214
• /
• 2017

High voltage electric power transmitter GIS(Gas Insulated Switchgear) above 72.5kV needs to satisfy domestic Korean peninsular standard(ES-6110-0002) in KEPCO with respect to normal and special operation conditions which include internal gas pressure, dead weight, wind and seismic load. Some other requirements not described in Korean standard can be applied from other international standards such as IEC(International Electronical Committee) 62271-203 and 62271-207. The GIS is a kind of pressure vessel structure made of aluminum and filled with SF6 gas of internal pressure 0.4~0.5MPa. Finite element analysis of GIS is performed with such operational loads including seismic loading and the stability and reliability is determined according to ASME BPVC(Boiler and Pressure Vessel Code) SEC. VIII standard where the allowable stress level of the pressure vessel is suggested. The result shows that the stress of GIS is satisfied the allowable stress level and the safety factor is about 2.3 for Korean peninsular standard.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.71-82
• /
• 2020

The existing transportation system, which is based on internal combustion engines, is rapidly being converted to electrification. Thus, eco-friendly public transportation with high transportation efficiency will continue to spread throughout the market in the near future. The purpose of this study is to compare and analyze the cognitive characteristics of passengers redgarding the technical and social factors of various public transportation means to help a successful introduction of eco-friendly public transit. Through a survey questionnaire (N=485), seven factors of seven transportation modes were evaluated and analyzed using principal component analysis. As a result, it is confirmed that potential passengers have high expectations for the eco-friendliness and city image of the eco-friendly buses. Also, it is confirmed that eco-friendly buses are superior in cleanliness and ride comfort than diesel buses. Given the study's results, this study identifies the cognitive characteristics of passengers regarding eco-friendly public transportation. We hope that these results will be used as basic information for image positioning and improved service with the use of eco-friendly transportation.

• Information Systems Review
• /
• v.6 no.1
• /
• pp.67-84
• /
• 2004

In spite of the widely held belief that e-Marketplace will be expanded continuously, scholars are still reluctant to accept the positive expectation. Many anecdotal evidence and case studies indicate that there are several obstacles that hinder e-business firms from building the e-Marketplaces. Actually, this obstacles has led many e-marketplaces' failures. The purpose of this study is to verify the possibility of the e-Marketplace expansion and to explore how to deal the obstacles in the e-Marketplace operation. To achieve such objectives, a successful e-Marketplace case was investigated. The conclusion of this research is as follows : (1) e-Marketplaces can be built even in the high asset specificity and high complexity of product description market. Therefore it is acceptable that e-marketplace will be expanded continuously as argumented by Malone et al.(1989). (2) But the driving factor is not solely information technologies but the capability of e-business firms that consider technical factors, social factors, and service related factors all together. It was also noted that the capability of e-business firms to handle the inherent obstacles is important for the expansion of e-Marketplaces.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.34-39
• /
• 2010

The purpose of this study is to suggest objective evaluation model as a plan to utilize as opportunity in establishing judgment standard of mutual inspection criteria and to upgrade inspection ability by reviewing and analyzing level of danger and importance in advance based on inspection results of inspection institutions regarding tower cranes used in construction fields. Tower crane is a mechanical device transporting construction supplies and heavy materials to places over 20~150M high from the ground for the period ranging from a short time of 2~3 months to two years after being installed in construction sites in vicinity of buildings or structures and is an important facility indispensable for construction sites. However, since use period after installation is short and professional technical ability of technicians working on-site about of tower crane is poor, systematic and quantitative safety management is not carried out As a part of researches on procedure of RBI(Risk Based Inspection) possible to apply to Knowledge Based System based on knowledge and experiences of experts as well as to tower cranes for solving these problems, quantitative RPN(Risk Priority Number) was applied to RPN utilizing technique of FMEA(Failure Mode and Effect Analyses). When general RBI 80/20 Rule was applied parts with high level of risks were found out as wire rope, hoist up/down safety device, reduction gear, and etc. However, since there are still many insufficient parts as risk analyses of tower crane were not established, it is necessary for experts with sufficient experiences and knowledge to supplement active RBI techniques and continuous researches on tower cranes by sharing and setting up data base of important information with this study as a starting point.

• 대한공업교육학회지
• /
• v.33 no.1
• /
• pp.1-22
• /
• 2008

The purpose of this research is to clarify the elements of the function of the role of industrial high schools that its experts perceived. The content of this research is verify the function element required for the performance of the role of specialized education through content validity ratio(CVR). This research adopted the method of literature research and Delphi method, which is to collect and come to an agreement of the opinions of the 26 research panels. The first round is constructed by the semi-constructed questionnaire for the analysis of the opinions of the panels by inductive method. The second round is to categorize the result of the first one into 7 domains, and asked each category by Likert's 5 scale checklists, and statistically analyzed mean, medium, standard deviation, and quartile. The third round is to statistically analyze Mean, standard deviation, medium, and validity ratio(CVR) to reassure the opinions of the panels on the basis of the result of the first one. The categorized contents of the function required for the performance of the specialized education in this research is 'in-service visit and in-service training', 'licence acquiring education', 'employment counseling and job employment information', 'custom-made education connected with industry', 'career education' and 'enhancement of basic career competency'. The panels are divided into professors, teachers, professionals, and policy administrators, and they verified the validity rate of the function role and priority of emphasis. The result showed that the tendency of the education is converting from physical function-centered education to education of emotional attitude and competence of thought.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.120-125
• /
• 2016

For the purpose of protecting personal property and lives from incidents, accidents, and threats such as terrorism, video surveillance equipment has been installed and operates in many places. Video surveillance technology has gradually developed into high-quality, high-definition equipment, and a lot of products have been launched. However, closed circuit television (CCTV) equipment for security purposes can invade a person's privacy. In this paper, we propose a way to protect personal video images using meta-data in an intelligent Internet protocol (IP) camera. We designed the system to mask personal video information from meta-data, define the method of image-information access according to user privileges, and show how to utilize the meta-data during storage and recorded data searches. The suggested system complies with guidelines for CCTV installation and operation from Korea's Ministry of the Interior. Installed on only a single server so far, due to the limitations and technical difficulties of hardware performance, it has been difficult to find a method that can be applied to personal image information using real-time protection techniques. Applying the method proposed in this paper can satisfy the guidelines, reduce server costs, and reduce system complexity.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.796-805
• /
• 2020

Purpose: A static loading test was performed to evaluate the ultimate flexural strength of a girder in which 80MPa high-strength concrete was synthesized on the compressive flange of the I-shape steel girder. Method: This test is designed and fabricated two types of specimens with different shear-connection specifications, and evaluated their ultimate flexural behavior until reaching the extreme event limit states. In addition, the ultimate strength was evaluated by comparing the test results and the results of the strain compatibility method. Result: By confirming the displacement within 0.02mm as a result of the relative slip measurement, it was verified that the two specimens secured perfect bonding. Therefore, the difference in the shear specification does not have a great effect on the stiffness, and if the specimens are completely synthesized, there is no difference in the behavior until it reaches the extreme-event limit states. Conclusion: The girder to be tested has a working load within the elastic range and meets the usability requirements for allowable deflection. Therefore, even if a part of the casing is subjected to the tensile force at the level of cracking, the deck will first reach the compression failure due to the role of the reinforcing bar.

• Journal of the Korea Society for Simulation
• /
• v.31 no.3
• /
• pp.35-44
• /
• 2022

In this study, we analyze and forecast quantum computer technology trends. Previous research has been mainly focused on application fields centered on technology for quantum computer technology trends analysis. Therefore, this paper analyzes important quantum computer technologies and performs future signal detection and prediction, for a more market driven technical analysis and prediction. As analyzing words used in news articles to identify rapidly changing market changes and public interest. This paper extends conference presentation of Cha & Chang (2022). The research is conducted by collecting domestic news articles from 2019 to 2021. First, we organize the main keywords through text mining. Next, we explore future quantum computer technologies through analysis of Term Frequency - Inverse Document Frequency(TF-IDF), Key Issue Map(KIM), and Key Emergence Map (KEM). Finally, the relationship between future technologies and supply and demand is identified through random forests, decision trees, and correlation analysis. As results of the study, the interest in artificial intelligence was the highest in frequency analysis, keyword diffusion and visibility analysis. In terms of cyber-security, the rate of mention in news articles is getting overwhelmingly higher than that of other technologies. Quantum communication, resistant cryptography, and augmented reality also showed a high rate of increase in interest. These results show that the expectation is high for applying trend technology in the market. The results of this study can be applied to identifying areas of interest in the quantum computer market and establishing a response system related to technology investment.