• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.122-128
• /
• 2017

In order to simplify the wiring of construction heavy equipment, researches on PLC(Power Line Communication)-CAN(Controller Area Network) communication module are actively proceeding. Even if a PLC-CAN communication module is developed, a simulator capable of judging whether the PLC-CAN communication module is operating normally is needed. In this paper, we designed and developed a simulator that can measure the status of PLC-CAN communication module. We analyzed the characteristics of the power line communication frequency band by analyzing the characteristics of the power line and compared the noise characteristics with the passenger car in order to characterize the heavy equipment noise.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.905-913
• /
• 2008

The water resource depending on mostly surface water has many problems, such as contaminated and unpredicted contamination event. For this reason, it has been employed highly technical treatment method for them, such as ground water dam and river bank filtration. it has been developed the radial collector wells in kind of bank filtration to increase efficiency for in-taking the water resource insead of the vertical well needed many wells to take more resource. But it has many problems with the incumbent method to bore the horizontal hole for radial collector wells, such as filling with the filter material outside of a strainer by watering, jamming as retrieving the casing tube with the filter material, eccentric boring etc. To reduce the problems of incumbent equipment, it has been developed the horizontal boring equipment and performed the field trial tests several times, which have bits and water jetting system with rotating the cone-shaped front to be excavated easily. In this paper, it was compared the brand-new with the incumbent non-rotating pressing insertion method. Also it was shown the problems of the incumbent method was reduced effectively.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.1
• /
• pp.101-107
• /
• 2008

According to the existing research result on the seabed organic sediment, pollutants from the land and the sea contaminate the coastal water and sediment on the seabed. To tackle this problem, we need to dredge organic sediment. In the present paper, the development of removing system of seabed sediment by the difference of water head is researched by experimental method. For the validation of the decompression system, computations for validation are carried out for sediment removing equipment. The performance of inhalation equipment is analysed by some model tests.

• Proceedings of the KIEE Conference
• /
• 2005.07e
• /
• pp.31-33
• /
• 2005

The accelerating of industrial development causes electricity demand to increase. By that power equipments need high power, multi function and intelligence. Also consumers demand for guarantee power supplying of good quality and reasonable operating equipment. Also they require for reliance and stabilization of power facility. Therefore preventive maintenance of electric installation must be developed and improvement of domestic technical level is needed in the maintenance management of equipment. The diagnosis of trouble existence is technique that compares steady state with unusual condition, whereas the prediction technique makes a diagnosis of remaining equipments life. It is difficult for us to diagnose trouble existence of electric installation and to develop prediction method in building because of a wide scope for electric installation in building. And in this paper we will investigate diagnosis and prediction method for only switch part of electric installation in building.

• Journal of Energy Engineering
• /
• v.22 no.3
• /
• pp.283-286
• /
• 2013

The existing nuclear power plants have been often redesigned by increasing or decreasing electrical power without changing design concept by the request of utility, economic factors or other factors. When the cost of power plant equipment redesigned by changing reactor power and electrical power is estimated, if its quotation is not available in the market place, cost scaling factor(CSF) applies to the cost of existing plant equipment and then the new-designed equipment cost can be calculated. In this paper, we review CSFs according to plant capacity change cases in United State DOE, EPRI, ABB, SWEC and introduce the results applied to Korean PWR 1000MWe and 1400MWe.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.222-248
• /
• 1996

This study was designed to survey misused expression in 37 KS (Korean Industrial standards) related to personal protective equipment. The results were as follows: 1. One hundred and twenty five misused expressions were found - 44 expressions were used illogically (35.2 %). 80 expressions were wrongly described (64.0 %) The types of illogically misused are: 10 illogical cases, 4 cases of a wrongly designated provision when cited, 12 cases of the lack of provisons for KS, 7 cases of a inappropriate uses of units, 8 cases of an overlapped sizes between standards. - The types of expressions wrongly described are: 30 cases of confusion in using an terms, 4 case of making an error when proofreading, and 29 cases of choosing words not appropriate to describe technical standard, 18 cases of unclear provisons due to missing phrases and terms, and 11 cases of provisons described differently from original intended purposes. 2. There is one case, where the same standard is categorized as two different names. There are three major causes of the misused expressions as seen from the following summary: - Imitated the developed countries' standards without filtering them by considering domestic law and ocher KS standards. - Tended to create each definition for each standard instead use of the basic standard. - Insufficiency of synthetic examination to the correlation between standards.

• Resources Recycling
• /
• v.9 no.6
• /
• pp.53-57
• /
• 2000

In the present paper, a current technical progress for recycling of used steel can is described. The developed technology was a kind of pre-treatment through an automatic equipment system to increase recycling and melting efficiency of used steel co. The process consisted of several unit processes such as breaking of steel can bale, removing dust, separation of aluminum can, delacquering, and compressing to bale. Also, aluminum powders were recovered as a by-product at the delacquering step. The process was carried out automatically through by use of the developed equipment system. The automatic system could be very available in mass treatment of used steel can.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1487-1493
• /
• 2008

Railway vehicle is very important to implement the effective maintenance in proper to prevent any failure during operation period. Many railway authorities are making efforts to maintain the railway vehicle through scientific and systematic procedure. To achieve this, Reliability Centered Maintenance(RCM) is partially applied. The efficiency of RCM has proven and its terminology was familiar with nuclear power, military and chemical plant etc. since the commercial aircraft's industries has introduced the maintenance program based on the target of reliability. The application of RCM on railway vehicle can be utilized with systematic analysis method to select the best effective maintenance period and action to prevent the failures by selecting the equipment affecting the its safety and reliability. This paper is presented that the procedure of adequate and effective maintenance for railway vehicle by comparing among the related standards in example IEC60300-3,11, MIL-STD-2173, and technical documents or papers. In accordance with above result, RCM procedure is proposed to apply effectively for maintenance of railway vehicle. That is, (1) Analysis of data and Calculation of criticality per equipment (2) Selection of equipment to analyze (3) Analysis of failure mode and effect (4) Evaluation of maintenance method and period (5) Optimization of maintenance program through renewal of maintenance method and period.

• Safety and Health at Work
• /
• v.13 no.2
• /
• pp.180-186
• /
• 2022

Background: In occupational studies, it is a known situation that technical and organizational attempts are used to prevent occupational accidents. Especially in the mining sector, if these attempts cannot prevent occupational accidents, personal protective equipment (PPE) becomes a necessity. Thus, in this study, the main objective is to examine the effects of the variables on the use of PPE and identify important factors. Methods: A questionnaire was implemented and structural equation modeling was conducted to ascertain the significant factors affecting the PPE use of mining employees. The model includes the factors that ergonomics, the efficiency of PPE and employee training, and PPE usage habit. Results: The results indicate that ergonomics and employee training have no significant effect (p > 0.05) on the use of PPE. The efficiency of PPE has a statistically meaningful effect (p < 0.05) on the use of PPE. Various variables have been evaluated in previous studies. However, none of them examined the variables simultaneously. Conclusion: The developed model in the study enables to better focus on ergonomics and employee training in the PPE usage. The effectiveness of a PPE makes its use unavoidable. Emphasizing PPE effectiveness in OHS training and even showing them in practice will increase employees' PPE usage. The fact that a PPE with high effectiveness is also ergonomic means that it will be used at high rates by the employee.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.484-497
• /
• 2021

This paper proposes an extended time uncertainty analysis approach in Level 2 human reliability analysis (HRA) considering severe accident management (SAM) strategies. The method is a time-based model that classifies two time distribution functions-time required and time available-to calculate human failure probabilities from delayed action when implementing SAM strategies. The time required function can be obtained by the combination of four time factors: 1) time for diagnosis and decision by the technical support center (TSC) for a given strategy, 2) time for strategy implementation mainly by the local emergency response organization (ERO), 3) time to verify the effectiveness of the strategy and 4) time for portable equipment transport and installation. This function can vary depending on the given scenario and includes a summation of lognormal distributions and a choice regarding shifting the distribution. The time available function can be obtained via thermal-hydraulic code simulation (MAAP 5.03). The proposed approach was applied to assess SAM strategies that use portable equipment and safety depressurization system valves in a total loss of component cooling water event that could cause reactor vessel failure. The results from the proposed method are more realistic (i.e., not conservative) than other existing methods in evaluating SAM strategies involving the use of portable equipment.