• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.321-326
• /
• 2001

Radionuclide X-ray fluorescence analysis is a method, which has many advantages for analysing various historic artefacts, as it is relatively cheap, sensitive and non-destructive, and it allows measurements in-situ. However, this analysis has also certain limitations especially concerning sensitivity to chemical elements only, irrespective of the compounds or chemical forms in which these elements have been bonded. In addition, light elements emitting very soft X-rays cannot be measured, and in order to detect a wide range of elements, it is necessary to carry out repeated measurements with different radiation sources. Despite these limitations, valuable information can be obtained about the composition of historic materials and data about the origin and age of these artefacts can be derived. Analyses of wall paintings, ancient metal sculptures or other objects of art provide the basis for historic considerations documented in our results for some objects belonging to the Czech cultural heritage. The results are promising. Thus it is expected that our laboratory will expand its work into more fields of the fine and applied arts.

• Journal of Korean Society for Quality Management
• /
• v.37 no.1
• /
• pp.1-9
• /
• 2009

Data envelopment analysis(DEA) has proved to be powerful for benchmarking and has been widely used in a variety of settings since the advent of it. DEA can be used in identifying the best performing units to be benchmarked against as well as in providing actionable measure for improvement of a organization's performance. However, the selection of performance benchmarks is a matter of both technical production possibilities and organizational policy considerations, managerial preferences and external restrictions. In that regards, DEA has a limited value in benchmarking because it focuses on only technical production Possibilities. This research proposes a new perspective in using DEA and a frame-work for benchmarking to select benchmarks that are both feasible and desirable in terms of organizational context. To do this, the concept of local and global efficiency is newly proposed. To show how useful the suggested concept and framework are, a case study is addressed.

• Ocean and Polar Research
• /
• v.31 no.1
• /
• pp.1-9
• /
• 2009

When evaluating acoustic methods for measuring physical parameters in the ocean, economical and technical considerations are paramount. As an indirect method of estimating ocean dynamics, acoustic tomography has advantages over more conventional approaches. It allows the reconstruction of temperature and flow fields from the acoustic impulse time-of-flight measured along the rays propagating from the source to the receiver. However, many problems require complicated and expensive systems. To use the acoustic tomography method to best effect, developing hardware systems with sources and receivers mounted permanently on the sea bottom is crucial. Akulichev et al. presented some experimental results from shallow zones of the World Ocean that served as a motive for developing a multifunction system with acoustic hardware and software. Here we present technical features and the sea test results of the system.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.04a
• /
• pp.80-92
• /
• 2003

The water retention of coating colors can be accurately measured by devices such as an AA-GWR water retention meter whose principle of measurement is based on pressure filtration of coatings under an externally applied air pressure over a certain period of time. It was hypothesized that such devices could be also used to determine the immobilization solids(IMS) of coating colors by determining a sudden drop in the rate of dewatering, that is, a sudden change in the drainage curves. To test this hypothesis, the immobilization solids of coating colors containing various thickeners and water retention additives at different levels were first accurately measured by a modified immobilization tester based on the well-known gloss drop method, and then their values were compared with those obtained by an AA-GWR water retention tester. They agreed very well and showed that the mean of the solids differences is 0.36% in the IMS points between both methods. This good agreement was not surprising because both test methods are based on the same end-point, that is, the immobilization solids point at which menisci begin to form at the coating surface. Theoretical considerations supporting this new method for measuring the immobilization solids of coating colors are presented and some recommendations for the test method are discussed. Also, the effect of various thickeners and water retention additives on the properties and printability of coated papers is discussed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.2
• /
• pp.24-33
• /
• 2015

This study aims to suggest wastewater treatment options for diaper recycling by identifying characteristic analysis of wastewater from diaper recycling process and efficiency evaluation of wastewater treatment units. The wastewater characteristic analysis showed that the concentration of organic pollutants and ionic materials were very high comparing to seawater. Through the investigation of similar wastewater treatment, six treatment units were identified to reduce pollutants. It is found UF(ultra-filtration), DAF(dissolved air flotation), fenton oxidation, electro-coagulation and chemical-coagulation are effective in reducing organic pollutants while membrane system and ion exchanger are effective in reducing ionic materials. Even though the target of water quality should be secured in terms of managing organic pollutants level, the application of treatment unit for reducing ionic material needs lots of considerations. This result suggests that reuse of pulping wastewater after controlling organic pollutants is better than direct discharge of pulping wastewater. To select the appropriate wastewater treatment unit, an economic analysis about operation condition, wastewater flow, cost, efficiency should be considered.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.1
• /
• pp.65-73
• /
• 2011

The fibrous raw materials in packaging-grade paper production in Korea were mainly obtained from waste paper. The use of recycled paper has both positive and negative impacts in papermaking process. The primary positive impacts are the environmental protection and manufacturing cost reduction, and the negative impacts are the quality reduction in paper quality and the accumulation of heavy metals and other pollutants in wet- and dry-end process. This study was carried out to consider the optimum acid decomposition system with the highest recovery rate for the analysis of heavy metals in packaging-grade paper. The open digestion system using Kjeldahl apparatus and the closed digestion system using microwave oven for decomposing the organic materials in paper were compared. In both open and closed digestion method, the combination of nitric acid, hydrochloric acid and hydrogen peroxide showed higher recovery rate than using only nitric acid alone because the presence of Cl- ions in hydrochloric acid stabilizes ligand formation with metal ions. KOCC was observed to have the highest heavy metal content among the recycled paper samples. The heavy metal contents decomposed with the closed digestion system were relatively higher than with open digestion system.

• Journal of Marine Bioscience and Biotechnology
• /
• v.5 no.4
• /
• pp.15-25
• /
• 2011

Marine sponges are a rich source of highly diversified bioactive compounds. These medicinally valuable molecules represent extreme physiological and ecological functions in sponges, more presumably involving in the resistance to the feeding by other marine organisms like fish and fouling by barnacles, bacteria, fungi, etc. This feature of attaining resistance made sponges as successful poriferans that possess an impressive array of biological properties ranging from antimicrobial to anticancerous activities. The diversified bioactive principle of sponges might be due to their spacio-temporal distribution and although, the gateway for exploiting the sponges for isolating these distinct, potential molecules is open, suitable technical and methodological approaches are yet to be implemented in order to bring the sponges as successful pharmaceutical leads in the field of marine biotechnology. Despite of the identified difficulties of marine sponge research from past few decades, one should concentrate not only on the basic and applied technical/methodological considerations, but also on the novel strategies like in vitro sponge cell, fragment and whole sponge culture; sponge symbiont cell culture; in situ and ex situ sponge cultivation; and sponge bioreactors and metagenomic approaches, for the successful exploitation of marine sponges towards the novelty in sponge biotechnology. The present review narrates the pros and cons of the nowadays-marine sponge research by focusing on the suggestive ecobiotechnological approaches, based on the latest studies for feasible ecological exploitation and biotechnological application of sponges from the sea.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.5
• /
• pp.63-69
• /
• 2002

A new concept of stock preparation for the increase of bending stiffness in paper and board was proposed. The "stiff" fibers, which were mechanically not treated or treated slightly to remove fiber curls, were combined with extensively refined fibers (ERF) to produce higher stiffness papers than those where the whole fibers were refined. The combination of "stiff" fibers and extensively refined fibers produced higher stiffness at the same tensile strength than the control furnish, in which all the fibers are refined together. In this concept, the fibers from recycled papers could be as much useful as the virgin fibers as long as they are stiff enough or they can produce highly bondable fiber fractions by extensive refining. Use of the concept in real paper mill needs considerations such as increase of refining energy, slower drainage, and added drying burden, but savings of wood fibers, utilization of more recycled fibers, and increase of physical properties may offset the negative concerns. The success of this concept implementation in mills, therefore, depends on the wood fiber market around the mills and the proper decision making for the papermakers about how to apply this concept. apply this concept.

• Steel and Composite Structures
• /
• v.44 no.3
• /
• pp.389-406
• /
• 2022

Recycling concrete construction waste is an encouraging step toward green and sustainable building. A lot of research has been done on recycled aggregate concretes (RACs), but not nearly as much has been done on concrete made with recycled aggregate. Recycled aggregate concrete, on the other hand, has been found to have a lower mechanical productivity compared to conventional one. Accurately estimating the mechanical behavior of the concrete samples is a most important scientific topic in civil, structural, and construction engineering. This may prevent the need for excess time and effort and lead to economic considerations because experimental studies are often time-consuming, costly, and troublous. This study presents a comprehensive data-mining-based model for predicting the splitting tensile strength of recycled aggregate concrete modified with glass fiber and silica fume. For this purpose, first, 168 splitting tensile strength tests under different conditions have been performed in the laboratory, then based on the different conditions of each experiment, some variables are considered as input parameters to predict the splitting tensile strength. Then, three hybrid models as GWO-RF, GWO-MLP, and GWO-SVR, were utilized for this purpose. The results showed that all developed GWO-based hybrid predicting models have good agreement with measured experimental results. Significantly, the GWO-RF model has the best accuracy based on the model performance assessment criteria for training and testing data.

• Journal of Digestive Cancer Research
• /
• v.4 no.2
• /
• pp.99-106
• /
• 2016

Minimally invasive surgery for gastric cancer has increased in popularity during the last two decades mainly in the Asia for patients with early-stage cancer. Nevertheless, the development of laparoscopic surgery for gastric cancers in the Western world has been slow because of the advanced stage at diagnosis for which LG is not yet considered an acceptable alternative to standard open surgery. RAG has been reported as a safe alternative to conventional surgery for treating of early gastric carcinoma. We assess the current status of robotic surgery in the treatment of gastric cancer focusing on the technical details, postoperative outcome, oncological considerations and future perspectives. In gastrectomy the biggest advantage of the robotic approach is the ease and reproducibility of lymphadenectomy. Reports also show that even the intra corporeal digestive restoration is facilitated by use of the robotic approach, particularly following TG. Additionally, the accuracy of robotic dissection is confirmed by decreased blood loss in comparison to conventional laparoscopy. The learning curve and technical reproducibility also appear to be shorter with robotic surgery and, consequently, robotics can help to standardize and diffuse minimally invasive surgery in the treatment of gastric cancer. While published reports have shown no significant differences in surgical morbidity, mortality, or oncological adequacy between robot-assisted and conventional gastrectomy. There are some advantages in terms of postoperative recovery of patients after robotic surgery. More studies are needed to assess the true indications and oncological effectiveness of robotic use in the treatment of gastric carcinoma.